Results 1 to 5 of 5

Thread: 1986 Accord/Vigor Trans flush!

  1. #1
    LX User DJAJ's Avatar
    Join Date
    Feb 2010
    Vehicle
    1988 Honda Accord 2.0SI
    Location
    Wellington New Zealand
    Posts
    177

    Talking 1986 Accord/Vigor Trans flush!

    *1986 Honda Vigor 1.8Litre Carb 12Valve A18A Engine*

    Can anyone tell me how many litres the trans takes once empty? i use Dextron 3 right?

    Ive done a engine swap from a latter accord with another A18A carb and the gearbox is different from mine it has like 2 solenoids? on the housing (what are these?


    Thanks all



  2. #2

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: 1986 Accord/Vigor Trans flush!

    the solenoids are on gearboxes that are in 88-89 models, the 86 doesn't have them, under your drivers seat there will be a trans computer you will need it and the associated wires to run the gearbox properly. or you can do what i did and just not hook them up. it just means the torque converter wont lock up and it will rev slightly higher in top gear but still shifts fine.

    nice to see another NZ member

  3. #3

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: 1986 Accord/Vigor Trans flush!

    with the fluid the manual says 3 liters if you change the fluid or 6 if you overhaul the gearbox, id go for 2.8 and then check the dip stick and top up accordingly, OR convert it to manual

  4. #4
    LX User DJAJ's Avatar
    Join Date
    Feb 2010
    Vehicle
    1988 Honda Accord 2.0SI
    Location
    Wellington New Zealand
    Posts
    177

    Re: 1986 Accord/Vigor Trans flush!

    Thanks, yeah all good i found the specs in my book after all that, have put 2.5l in it and all good the torque was still fill. So far so good, does have a little slip between 2'n 3rd when going up hill.

    Shouldn't be too bad has only done 145,000k's.

  5. #5
    LX User DJAJ's Avatar
    Join Date
    Feb 2010
    Vehicle
    1988 Honda Accord 2.0SI
    Location
    Wellington New Zealand
    Posts
    177

    1986 Accord/Vigor No reverse lights?

    Got no reverse lights, checked the selector and bulb? any ideas? no power feed to reverse light but park lights work?
    Last edited by DJAJ; 03-06-2010 at 05:06 PM. Reason: Diff topic

Similar Threads

  1. Installing a Vigor garnish on a non-Vigor trunk lid (with PICS!)
    By Hazwan in forum Interior & Exterior Care
    Replies: 4
    Last Post: 07-03-2012, 07:57 PM
  2. 1986 Honda Vigor (New Zealand)
    By DJAJ in forum Classic Honda Pics & Videos
    Replies: 21
    Last Post: 05-15-2010, 09:38 PM
  3. vigor and accord???
    By A18A in forum Classic Honda Community Chat
    Replies: 23
    Last Post: 11-20-2005, 11:44 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink