Page 1 of 4 1234 LastLast
Results 1 to 25 of 99

Thread: losts wiring harness projects in the hatch

  1. #1
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    losts wiring harness projects in the hatch

    I got some more harness stuff done today,most of several modules installed, and the harness built for it and some of the audio system, and part of the harness for the voice warning system.

    harness before it went in



    rear floor panel installed

    bolt that holds down spare tire

    tire in place with spacer

    cover in place




  2. #2
    2.0Si User ShyBoyCA6's Avatar
    Join Date
    Oct 2009
    Vehicle
    89 Honda Accord Coupe
    Location
    Pacoima, California, United States
    Posts
    3,034

    Re: losts wiring harness projects in the hatch

    nice very nice and good to see your working on the hatch lost

  3. #3
    3Geez Veteran
    Join Date
    Oct 2007
    Vehicle
    88coupe
    Location
    Marietta, Ga
    Posts
    4,084

    Re: losts wiring harness projects in the hatch

    is that nos on the left?? lol

    looks like fun.. i hate running wiring

    Quote Originally Posted by CAH View Post
    pullin up turbo spoolin fast lookin fly like a 3g like a 3g like a 3g

  4. #4
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    Quote Originally Posted by Tdurr View Post
    is that nos on the left?? lol

    looks like fun.. i hate running wiring
    no bazooka

  5. #5
    2.0Si User ShyBoyCA6's Avatar
    Join Date
    Oct 2009
    Vehicle
    89 Honda Accord Coupe
    Location
    Pacoima, California, United States
    Posts
    3,034

    Re: losts wiring harness projects in the hatch

    Quote Originally Posted by lostforawhile View Post
    no bazooka
    can i use it?? lol

  6. #6
    3Geez Veteran Rendon LX-i's Avatar
    Join Date
    Apr 2003
    Vehicle
    86 Honda Accord sedan B-series
    Location
    Selah, Washington, United States
    Posts
    6,435

    Re: losts wiring harness projects in the hatch

    Lmfao. ^^^^


    200+ ALL MOTOR LS VTEC

  7. #7
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    Quote Originally Posted by Rendon LX-i View Post
    Lmfao. ^^^^
    it's a good bazooka, from back when they were the shit. I reinforced the tube to get rid of rattles, it's a powered one with the heavy voice coil, ditched the factory internal amp and run it off of an old school Sony amp, and active crossover network.
    Last edited by lostforawhile; 03-30-2010 at 05:53 PM.

  8. #8
    3Geez Veteran Rendon LX-i's Avatar
    Join Date
    Apr 2003
    Vehicle
    86 Honda Accord sedan B-series
    Location
    Selah, Washington, United States
    Posts
    6,435

    Re: losts wiring harness projects in the hatch

    O i know what you saying my buddy had 4 of them all together and wow it was killer dude.

    i was leaning towards shy's reply. I think he might as a weapon CAN I USE IT LOL


    200+ ALL MOTOR LS VTEC

  9. #9
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    Quote Originally Posted by Rendon LX-i View Post
    O i know what you saying my buddy had 4 of them all together and wow it was killer dude.

    i was leaning towards shy's reply. I think he might as a weapon CAN I USE IT LOL
    yep,thats why the warning decal on it lol i wish i had a picture of the real decals on a real one, i could have a decal printed.

  10. #10
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch




  11. #11
    2.0Si User ShyBoyCA6's Avatar
    Join Date
    Oct 2009
    Vehicle
    89 Honda Accord Coupe
    Location
    Pacoima, California, United States
    Posts
    3,034

    Re: losts wiring harness projects in the hatch

    oh is that what it is lol jk i knew what it was lol just messing around rendon and damn tim looks like alot of work went into this i think i would get a headache trying to figure out on how you did it

  12. #12
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    I just got the radio remote interface box from ebay for ten bucks, guy bought it to adapt some steering wheel controls and never used it. it's the PAC SWI-X , I still need to use my relay box I built, on a steering wheel with remote buttons and a positive output, it sends 12 volts to the radio and each button has a resistor in line with it. this produces a different voltage depending on which button is pushed. On my setup with the mirror button, i have a bunch of different wires with 12 volts i need to use the relay box and diodes to separate the mirror switch into eight outputs. the mirror switch switches the eight relays on and off. I just need to connect 12 volts common to all of them, then each output gets a resistor of a different value. You can't connect the box directly to 12 volts in. you need between 1k and 20k in resistance per voltage input.

  13. #13
    3Geez Veteran Civic Accord Honda's Avatar
    Join Date
    Aug 2006
    Vehicle
    1995 Civic/ 1988 CRX
    Location
    Tehachapi Ca
    Posts
    13,103

    Re: losts wiring harness projects in the hatch

    that spare tire doesn't look very trustworthy sir, the braids are showing O.o

    1988 Honda Accord LX-i Coupe 123k miles.

  14. #14

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,061

    Re: losts wiring harness projects in the hatch

    im waiting on the fire extinguisher mod.. rofl

    guulod thats alot of shtuff Tim..and pwned by
    CAH about the donut spare

    still love ya bro..
    Last edited by 2oodoor; 03-31-2010 at 03:15 PM.

  15. #15
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    Quote Originally Posted by Civic Accord Honda View Post
    that spare tire doesn't look very trustworthy sir, the braids are showing O.o
    yea i know it's just a bad tire off of the civic to see how everything fits.

  16. #16
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    Quote Originally Posted by roodoo2 View Post
    im waiting on the fire extinguisher mod.. rofl

    guulod thats alot of shtuff Tim..and pwned by
    CAH about the donut spare

    still love ya bro..
    thats been done,it's the vaccume bottle, it's since i will have a little bit lower vaccume with the dual carbs and the cam. it's for the brake booster

  17. #17
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    anyone have a lot of resistors around? There is nowhere to buy any here now.
    in order to make the radio remote adapter work, i need about ten resistors of different values, starting about 1k and anything up to 20k values aren't important, just ten different values with a decent difference between each one. i have to wire the ten relays with 12 volts common then each relay output gets a different resistor. this is how the unit knows what button you pushed.

  18. #18
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    I have the resistors, bought a huge grab bag of electronic parts from ebay, has every kind of component in it I could imagine, it's like Christmas ten bucks, i probably have a thousand diodes and resistors alone now. in addition to every other kind of component I could ever want.

  19. #19
    LX User Sporno's Avatar
    Join Date
    Dec 2005
    Vehicle
    1987 Honda Accord LXI
    Location
    Richmond ,VA
    Posts
    398

    Re: losts wiring harness projects in the hatch

    holy crap its been a while lost! Dude this is awesome man, I gotta see what youve been doing with the car recently.
    2006 NASA/VCU regional Semi-finalist
    2006 FIRST Robot Rumble Quarter-finalist
    2006 FIRST Robot Rumble - Most Promosing Rookie Drive team.
    2006 Championship Curie division
    2007 NASA/VCU- Regional Winner
    2007 Championship-Galileo
    74+ matches on the feild

  20. #20
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    I'm waiting for cooler weather to go work out there, it's been nearly 100 almost every day this summer, just impossible to work.

  21. #21
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    some updates,just been working on the car to not think about my life self destructing, pardon the fact it's dirty, it eventually will get cleaned. there isn't much point in cleaning it until it's done. I had to do some grinding to the cross bar under the glove box, for those not familiar to this car, on mine, it also holds the bell crank assembly for the choke cable, as well as some other items, it's been heavily reinforced with steel, I was having minor clearance issues with the courtesy light I put in, I also added another aluminum cross drilled piece,it holds three relays in a slide out box, and will hold the clamp for the choke cable from the dash side.
    cross bar, slighty modified




    this is about where the msd box will sit

    coil,and all i had to do was use a spark plug boot end to fit on it


    you can see how little of the relay box sticks out
    Last edited by lostforawhile; 10-19-2010 at 09:55 PM.

  22. #22
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    spent a couple of dollars buying a used dvd at the pawn shop, and i asked how much this was, no one knew if it worked so she gave it to me, one nine volt later and one fuse and I now have a working sperry meter.

    laying out a pattern for the box, I found a stack of heavy wax card stock folders in my garage when i moved in, everything in there dated from the 40's, best pattern material in the world, too bad they don't make it anymore, I've looked , I'll have to make it last.


    Last edited by lostforawhile; 10-19-2010 at 09:56 PM.

  23. #23
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    I have the underdash fuse panels in place in the passenger footwell, I found out ace 8 gauge connectors from ace are crap, the terminals are worthless, also it's 8 gauge stranded, so it fits a 6 gauge connector, My regular crimpers are worthless, and the rachet crimpers are at work, so I ended up making one, two scrap pieces of aluminum, two 5/16 bolts to tighten it, and a 5/16 bolt to make the crimp. put the wire in the crimp connector, tighten the bolts, then tighten the center bolt to make the crimp, release the center bolt, unscrew the holding bolts, and force the connector out with the center bolt, nice round crimp and extremly strong.




    Last edited by lostforawhile; 10-22-2010 at 03:17 PM.

  24. #24
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    I found a couple of heavy duty relays finally, now I can finish the ignition, the key switch does nothing but turn on the accessory, you have to have the key with the transponder in order to have power for the ignition and start. I need to make some wire anchors to secure the wire looms.

    I was trying to find a four position fuse block, which I didn't find, but I did find this, it's a bus bar, what i'm going to do is mount it where the square hole is, next to where the emissions box would go. since my battery cable runs though the fender already, i can terminate it at the bus bar, then run the cables to the fusebox,starter,and alternator through the fender, this will hide a lot of wires

  25. #25
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: losts wiring harness projects in the hatch

    I got it all plugged in to the fuse box, and the heavy splices lay horizontal to the bottom of the dash, so they are invisible, it will all follow the original loom to the rear quarters. putting that fuse box back in is a son of a bitch, my legs are still cramping from laying twisted under the dash for so long. just shaking involuntarily, plus i've been out there since 7 last night. time to quit and get some sleep

Similar Threads

  1. Wiring Harness
    By Josh89accord in forum Wanted
    Replies: 0
    Last Post: 06-20-2009, 07:29 AM
  2. F22 to H22 Wiring Harness
    By F22B1VTEC in forum Classic Honda Community Chat
    Replies: 7
    Last Post: 10-21-2007, 03:10 AM
  3. hu wiring harness
    By Spoolin'12 in forum Interior & Exterior Care
    Replies: 1
    Last Post: 09-25-2004, 01:15 PM
  4. WTB:::HU wiring Harness
    By coolcatkoko2000 in forum Trading Post
    Replies: 11
    Last Post: 01-22-2004, 08:28 PM
  5. WTF?? wiring harness
    By MyGarbageLXi in forum Interior & Exterior Care
    Replies: 7
    Last Post: 09-29-2002, 05:38 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
VigLink badge