i need to find one for my build.....any one can help me out?
i need to find one for my build.....any one can help me out?
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
the one you have is probably just fine... this isnt one of those exclusive parts is it? slant b20 pump works on it yes?
Yeah i wanted a new one for mine but i could not get one so i am going to have mine cleaned up since it was new before i blew the motor. I think carot said you can use internals for the pump from something off the shelf maybe the B20A5?
I probably have a used pump if you need one to rebuild.
I posted the part numbers earlier today
https://www.3geez.com/forum/showthread.php?t=29259
Just get new internals from your local dealer.
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
so im going to pick up a b20a5 oil pump and try to rebuild mine since my dealer says some parts are not avaliable...also going to pick up a b20a3 water pump
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
i thought b20a3 and b20a5 were the same block
Yup, they are the same casting. However, the B20A5 water pump is different from the B20A3. The difference is in the gear diameter. The B20A3 is the same as the 1st gen JDM B20A
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
good to know, cause ones single cam and ones not
Oil pump as either a whole unit or as parts are no longer available.
Just been on the phone to Honda , and they just happened to be on the Honda japan parts link, nothing available at all.
Does any one have an early b16a pump to pull to bits and measure ?
Bookmarks