Page 9 of 9 FirstFirst ... 56789
Results 201 to 214 of 214

Thread: The time has come

  1. #201
    Accord of the Year - 2006

    guaynabo89's Avatar
    Join Date
    May 2002
    Location
    FL
    Posts
    4,144

    Re: The time has come

    Keep posting, I want to see how far we can take these motors.



  2. #202
    3Geez Veteran
    Join Date
    Oct 2007
    Vehicle
    88coupe
    Location
    Marietta, Ga
    Posts
    4,084

    Re: The time has come

    Make me proud. I gotta build a bottom end so i can chase #s with you.

    Quote Originally Posted by CAH View Post
    pullin up turbo spoolin fast lookin fly like a 3g like a 3g like a 3g

  3. #203

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: The time has come

    Quote Originally Posted by AccordEpicenter View Post
    Looks like I'm gonna stick with the SC6152S for now but change the turbine housing from a .48 to a .82. I saw a guy make 530whp on the 6152S with a .63 housing then he switched up and make another 70whp over that going to the .82 housing with no other changes. So I believe the car should make an easy 525-550whp easily with the BIG housing
    For sure go with the .82. I think we could actually go a little bigger, even though the .82 "feels" really good.

    Sent from my SM-T800 using Tapatalk
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

  4. #204
    SEi User Shane86's Avatar
    Join Date
    Feb 2016
    Vehicle
    86 honda accord lxi 3 door hatchback
    Location
    Florida
    Posts
    1,016

    Re: The time has come

    Bump

  5. #205
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: The time has come

    Update:

    The ported head I was running seems to have a few issues and was starting to drop a couple of valve guides so I got my old head and moved all the valves/springs/retainers over. I ported the stock head I have out and unshrouded the valves in the combustion chambers. That was a project in itself and I probably have at least 10-12 hours into it!! It's apparent that the stock ports needed a bit of work specifically around the bowl area between the guide and the valve seat. The exhaust bosses around the guide definintly had to be ground down (not the guide, just the bosses around it) and seemed to intrude on the port a good bit. I'll probably have the head entirely assembled and back into the car in a couple of weeks or so. I had recently helped my friend make over 625whp on his civic hatch (S366 turbo, way over 30psi boost) and he's gunning for me to get my car back together and wants to re tune it for me on the dyno with the new head on. So stay tuned!

  6. #206

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: The time has come

    Quote Originally Posted by AccordEpicenter View Post
    Update:

    The ported head I was running seems to have a few issues and was starting to drop a couple of valve guides so I got my old head and moved all the valves/springs/retainers over. I ported the stock head I have out and unshrouded the valves in the combustion chambers. That was a project in itself and I probably have at least 10-12 hours into it!! It's apparent that the stock ports needed a bit of work specifically around the bowl area between the guide and the valve seat. The exhaust bosses around the guide definintly had to be ground down (not the guide, just the bosses around it) and seemed to intrude on the port a good bit. I'll probably have the head entirely assembled and back into the car in a couple of weeks or so. I had recently helped my friend make over 625whp on his civic hatch (S366 turbo, way over 30psi boost) and he's gunning for me to get my car back together and wants to re tune it for me on the dyno with the new head on. So stay tuned!
    Good to see you back!


    Sent from my SM-T800 using Tapatalk
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

  7. #207
    3Geez Veteran
    Join Date
    Oct 2007
    Vehicle
    88coupe
    Location
    Marietta, Ga
    Posts
    4,084

    Re: The time has come

    yesss!!! i need to get a head p&p

    Quote Originally Posted by CAH View Post
    pullin up turbo spoolin fast lookin fly like a 3g like a 3g like a 3g

  8. #208
    Accord of the Year - 2006

    guaynabo89's Avatar
    Join Date
    May 2002
    Location
    FL
    Posts
    4,144

    Re: The time has come

    Quote Originally Posted by Tdurr View Post
    yesss!!! i need to get head
    A bit personal no?

  9. #209
    3Geez Veteran
    Join Date
    Oct 2007
    Vehicle
    88coupe
    Location
    Marietta, Ga
    Posts
    4,084

    Re: The time has come

    Quote Originally Posted by guaynabo89 View Post
    A bit personal no?
    Being deployed has its downsides lol

    Quote Originally Posted by CAH View Post
    pullin up turbo spoolin fast lookin fly like a 3g like a 3g like a 3g

  10. #210
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: The time has come

    Update: the head is back on the car and torqued down TIGHT with the head studs and copper spray. I'm using a new AC Delco digital torque adapter and it worked pretty well to get the right torque on the head studs. I have to get the intake manifold and turbo mani/turbo back on and also set the valve lash before its done. I'm probably going to upgrade to a 6262 turbo or somthing bigger in order to make more power, probably better in the long run than changing housings

  11. #211
    SEi User Shane86's Avatar
    Join Date
    Feb 2016
    Vehicle
    86 honda accord lxi 3 door hatchback
    Location
    Florida
    Posts
    1,016

    Re: The time has come

    Quote Originally Posted by AccordEpicenter View Post
    Update: the head is back on the car and torqued down TIGHT with the head studs and copper spray. I'm using a new AC Delco digital torque adapter and it worked pretty well to get the right torque on the head studs. I have to get the intake manifold and turbo mani/turbo back on and also set the valve lash before its done. I'm probably going to upgrade to a 6262 turbo or somthing bigger in order to make more power, probably better in the long run than changing housings
    Awesome you'll have it going in no time

  12. #212
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: The time has come

    Soo doing research on my setup, I initially thought the turbo was undersized but the compressor side is the same as GT35R (650+hp) and my turbine is the same as 6262 precision (rated to 705hp) so I don't think the turbo is the restriction overall. My intercooler is about 8" tall but only 2.75" thick so I'm thinking that might be my main issue considering most 600hp rated cores are between 10-12" high and 3"+ in thickness which is at least 25-30% bigger in terms of outright flow...

  13. #213
    SEi User Shane86's Avatar
    Join Date
    Feb 2016
    Vehicle
    86 honda accord lxi 3 door hatchback
    Location
    Florida
    Posts
    1,016

    Re: The time has come

    Quote Originally Posted by AccordEpicenter View Post
    Soo doing research on my setup, I initially thought the turbo was undersized but the compressor side is the same as GT35R (650+hp) and my turbine is the same as 6262 precision (rated to 705hp) so I don't think the turbo is the restriction overall. My intercooler is about 8" tall but only 2.75" thick so I'm thinking that might be my main issue considering most 600hp rated cores are between 10-12" high and 3"+ in thickness which is at least 25-30% bigger in terms of outright flow...
    Yes definitely upgrade the inner cooler I was watching a video on YouTube and they swap from a littler one to a bigger one and it freed up a hundred horsepower
    Last edited by Shane86; 12-02-2017 at 11:51 PM.

  14. #214

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: The time has come

    Quote Originally Posted by AccordEpicenter View Post
    Soo doing research on my setup, I initially thought the turbo was undersized but the compressor side is the same as GT35R (650+hp) and my turbine is the same as 6262 precision (rated to 705hp) so I don't think the turbo is the restriction overall. My intercooler is about 8" tall but only 2.75" thick so I'm thinking that might be my main issue considering most 600hp rated cores are between 10-12" high and 3"+ in thickness which is at least 25-30% bigger in terms of outright flow...
    Hit me up on face book. Jeremy gallegos

    Sent from my SM-G935P using Tapatalk
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

Similar Threads

  1. alrighty its that time again...... rant time
    By buttaz1 in forum Classic Honda Community Chat
    Replies: 4
    Last Post: 05-08-2007, 09:22 AM
  2. tax return time = upgrade time!!
    By hootymo in forum Classic Honda Community Chat
    Replies: 15
    Last Post: 02-08-2005, 09:20 PM
  3. Long time viewer, first time poster.
    By bc86 in forum Classic Honda Pics & Videos
    Replies: 22
    Last Post: 07-24-2004, 10:47 PM
  4. time to kill my 3gee ? or time to ....
    By bboipinoy112 in forum Classic Honda Community Chat
    Replies: 2
    Last Post: 07-31-2003, 12:22 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink