EOK well I retrieved the code but I'm lost because there was pause butit was a total of 13 but with the pauses it was 1 6 7 so do I have mutiple problems ?
http://www.youtube.com/watch?v=C53GVpgrz6c&sns=em
Here's a video
And its a 88 lxi
EOK well I retrieved the code but I'm lost because there was pause butit was a total of 13 but with the pauses it was 1 6 7 so do I have mutiple problems ?
http://www.youtube.com/watch?v=C53GVpgrz6c&sns=em
Here's a video
And its a 88 lxi
Last edited by va_nig_rawr; 07-19-2010 at 07:07 AM.
that first blink was just to let you know that the ecu is working, after that pause, it flashed a code 6, then paused, then repeated code 6, then paused, and started repeating code 6 again, but your turned the key off after the first flash. code 6 is your engine coolant temp sensor. a common fault & a fairly simple thing to replace if you're somewhat mechanically inclined. it will be a little thing going into the cylinder head (under the distributor area) with 2 wires going to it. that should be removable with a 17 or 19mm socket i think
Last edited by A18A; 07-19-2010 at 07:37 AM.
Oh ok so it just repeats its self? And thank you sir I appreciate the quick and straight forward response
no worries (Y) and yes it just keeps repeating itself over and over
One question can you point me to a DIY cause I've tried the search box but no lucky
Theres on or two post here in the efi section. Look under ECT I think the sensor is called.
wp
1988 Lxi owner since August 1995
336k miles running strong!
Now running E85.
Oldblueaccord <<< MY YOUTUBE PAGE!
ok thanks found one and would you happen to find the parts number for the ect sensor i cant find it to save my life
It's also referred to as the TW sensor (water temperature). That may help you locate the part number.
Mike
Posting Permissions
Reply With Quote
Bookmarks