Have a quick question? Ask it here!

[TKP89]

How much do they charge for replacement keys at the dealership? I've heard anywhere from $10 to $80, but that seems way to high even for dealership prices. I would much rather have a factory looking key, than the cheap looking ones that i got with the car.

[Dr_Snooz]

You can find factory blanks on eBay. Of course, by the time you pay for shipping, it might be even more than the dealer. Just make sure that the dealer is going to give you the factory keys and not the same cheesy keys you can get for a couple bucks at Wal-Mart.

[HLW]

energy suspension also has one for a civic but it's the same

Energy's is for teh front and back of the shift torque rod only. Caedda's is for the front of the torque rod and all 3 pivot points in the shift rod. Look at pictures of both. I have already put the Energy suspension kit on my car but I need to replace the bushings in the shift rod itself to fix the slop from worn bushings.

[firefighterwhite89]

Just bought a kit from him. No clue if it has shipped yet though. I'll make a write up with pictures of course shortly after they arrive. It said it could take a week to 4 weeks to ship if the parts are not all stocked. I'm excited and can't wait to get them.

Sent from my Samsung Galaxy Prevail 2

[89T]

Sent from my SPH-L720 using Tapatalk 2

[TKP89]

You can find factory blanks on eBay. Of course, by the time you pay for shipping, it might be even more than the dealer. Just make sure that the dealer is going to give you the factory keys and not the same cheesy keys you can get for a couple bucks at Wal-Mart.

Thanks Dr_Snooz , i stopped by the dealer today and they just had the knock offs :/ well to ebay it is!

[firefighterwhite89]

Sent from my SPH-L720 using Tapatalk 2

This is the transmission torque rod bushings...Not the shift rod bushings. I already got this kit with the misleading words shifter bushings. They don't go anywhere on the shift rod...
Cheddas bushings for the 86-89 integras will not work as our shifter bushings. He contacted me earlier and explained they were for a d-series. No luck on that end. I'll measure some stuff up though and hopefully he'll cut us some.

[Dr_Snooz]

Thanks Dr_Snooz , i stopped by the dealer today and they just had the knock offs :/ well to ebay it is!

I suspected as much. I went to the stealer awhile ago for a factory distributor oring. Instead of the sealed Honda bag with a part number on it, however, they handed me a bare oring. It was probably from the same Harbor Freight oring kit that I have at home. Still, they charged me $3.50 for it. There's nothing like paying 10x more than every other place for the same junk. I don't know how the dealer part departments stay in business. Yesterday they charged me $10 for another oring (too big to be in my kit this time). Next time, I'll be using RTV. Thieving rats.

[TKP89]

damnn man, i feel like the only way to get anything thats a genuine honda part is used or ebay. with the key blanks i ended up paying 5 bucks for two which i dont feel too bad about paying for, probably a lot cheaper than if the dealer did have them.

[89trooper]

The dealer out here was like $5-6 but they punched them for free.

Sent from my HTCONE using Tapatalk

[lostforawhile]

I cant believe this thread is still going lol, the other one I started years ago, the what are you doing thread, went through several revivals and disappeared. Probably the only thread to have so many pages it crashed the server rofl

[HLW]

This is the transmission torque rod bushings...Not the shift rod bushings. I already got this kit with the misleading words shifter bushings. They don't go anywhere on the shift rod...
Cheddas bushings for the 86-89 integras will not work as our shifter bushings. He contacted me earlier and explained they were for a d-series. No luck on that end. I'll measure some stuff up though and hopefully he'll cut us some.

That's interesting since he has the shifter linkage upgrade listed on the 86-89 accord page as well as the 86-89 Integra page. Did he give you the measurements on the bushings?

[firefighterwhite89]

No. Its not listed on the 86-89 accord page either. I went through a link on here to find them. That's why I asked if they fit on here. I kept hearing they'd fit, but if they fit, why not list them for our car...he refunded me the money though. They are for a d series essentially.

Sent from my Samsung Galaxy Prevail 2

[lostforawhile]

let me look it up a kit that fits the civic and crx is the exact fit for our cars, thats what I used

[lostforawhile]

here's the thread. The energy suspension part numbers that fit our cars are on here. I'm sure they still make them, but if not,this is a popular kit, and is probably on ebay https://www.3geez.com/forum/performan...ack-again.html

[firefighterwhite89]

Sent from my Samsung Galaxy Prevail 2

[firefighterwhite89]

I need the bushings that go to the bottom rod in the picture. I've already installed the civic one everyone keeps referring to. I need the aluminum spacer you made basically. That part. Can you make another? Do you still have the dimensions used? I was just gonna order some Poly stick the right dimension and cut it to size...

Sent from my Samsung Galaxy Prevail 2

[lostforawhile]

I can take it back out and measure when i get a chance,do you have the two plastic pieces that go on the end?

[firefighterwhite89]

Yes, they're both cracked though...and worn quite down badly

Sent from my Samsung Galaxy Prevail 2

[lostforawhile]

Did you use both energy suspension bushings? One goes at the back to support the shift assembly, and one goes in the torque rod at the transmission

[firefighterwhite89]

Yes, and it has alot less torque movement when shifting hhard, but the shifter itself still has play. You can see it when you crawl under the car. I need to replace it all somehow. Chedda said he'd cut some if I could get the sizing for him as he doesn't have a 3gee.

Sent from my Samsung Galaxy Prevail 2

[lostforawhile]

I will try and measure this weekend, can you see if someone can find you some of those plastic things? The aluminum piece was simple i just need to reverse engineer my own part

[firefighterwhite89]

I can try. I can really measure the ttransmission gear selector shaft easy. I still have that blown transmission sitting on the backburner to use the casing for the b series gears. I just have never really had spare money to sink into a good quality micrometer to make true best measurements with, and I know you have one.

Sent from my Samsung Galaxy Prevail 2

[firefighterwhite89]

Energysuspensionparts.com has universal bushing in a rather large collection but they're mostly made sae size and even with some cutting down, which one to order and try?

Sent from my Samsung Galaxy Prevail 2

[lostforawhile]

Energysuspensionparts.com has universal bushing in a rather large collection but they're mostly made sae size and even with some cutting down, which one to order and try?

Sent from my Samsung Galaxy Prevail 2

im talking about the little plastic pieces that go on eithier side of the factory linkage bushings, maby someone has a good set on a parts car,