What size injectors are you running?
What size injectors are you running?
im not boosted but i think i recall somebody on here using volvo 740 injectors... i think
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
If I remember someone recommended me 600cc RC when I get around to.
Yea for photoshop...No license plate. :3
"If I shoot a leprechaun, will Lucky charms explode everywhere?"
depends on power level. 450cc is fine for 250-275whp, and i run 880s
429whp 362wtq A20 TURBO. A20T>*
I got a set of 450s but ithink that's go limit me so I wana run 750s.
I am running rc850's whitch is good for 600+- on race fuel, yet i am switching to ID1000's and E85 for fuel. Going green you know.
Last edited by 89T; 10-20-2010 at 04:01 PM.
un-motivated!
someone make me an offer i just could not say no to.
3GR
dsm 450s. i thought those were good up to like 300-350hp.
Originally Posted by CAH
They are. Dsm guys running almost 20psi on stock injectors pushing over 300. blue tops are safe for 300 to 400 and thats pushing it when i mean 400. LOL
200+ ALL MOTOR LS VTEC
they max out at around 300whp but if you bump your fuel pressure way up, you might be able to get around 330-350whp but yeah thats reaaallly pushing it
429whp 362wtq A20 TURBO. A20T>*
lol ill do 3 and go bosch 800s
200+ ALL MOTOR LS VTEC
Are those rc injectors any good?
no the rc are just RC. Those are pretty good ...but the bosch are the best out there. Thats why they cost a arm and a leg.
200+ ALL MOTOR LS VTEC
I run the Id1000 injectors simply because those 1000's can push upto 1600cc all day long and still idle good.
un-motivated!
someone make me an offer i just could not say no to.
3GR
Yes sir. thats what i want when i get my build. How much your set cost?
200+ ALL MOTOR LS VTEC
like 450
un-motivated!
someone make me an offer i just could not say no to.
3GR
i have some DSM 450 injectors if you are interested.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
I have a set of 450s but i just want to use a set of injectors that wont limit me. Im doing a stock engine build right now but im collecting parts for a a20/b18 internal build that i hope to have done by mid summer next year.
Last edited by stephensimmons; 10-22-2010 at 06:58 AM.
i got them off a guy that ran turbo on his accord...he said he was doing like 180whp to 200whp... i think EricW ran 440cc injectors can made 240whp
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Have RC 550's and hopefully i stay within range so i don't have to upgrade them.
i plan on maxing out the 450s... lol
Can any one tell me what this turbo is good for?
http://www.invasionautoproducts.com/20ivtrhxtu406.html
I was given a brand new one. The flang is smaller than a T3 flange though. Maybe its a t25 flande or something? Ita a hx27w.
waste of time. just find a good T3 or I have a hy35 and stock grand national turbo.
you're pick $380 plus shipping.
un-motivated!
someone make me an offer i just could not say no to.
3GR
Thanks for the reply! I kinda figured it was but i had to ask. Guess ill use it for a shelf display or something. Dose the hy35 have a t3 flange?
yes it does, unstud the one side drill the threads out and you are golden.
un-motivated!
someone make me an offer i just could not say no to.
3GR
Posting Permissions
Reply With Quote
Bookmarks