switch from 100mm bolt wheels to 115mm

[PeterNtheWolf]

how is this done? i want to fit different factory wheels and theyre 115mm

[RAZR]

what wheels to u wanna put on?

[A18A]

do you mean 4x114.3?

[labeledsk8r]

Not worth the trouble

[charliekuney]

^

[lostforawhile]

there are plenty of good wheels made in that size to fit the civic,etc. I'm sure you could swap them, but on the front, this would involve finding a hub center with the diameter as the factory, and pressing it in, then finding a brake disc with the right hole spacing, then on the back if you had drums, you would have to make a drum fit with the right spacing, and swap rear hubs also, which don't press out, but are bolt in assembles. why go to the trouble? there are about 599688677477473883 civics on the road that take the same 4x100 wheels as our cars, there is a good selection if you look

[Civic Accord Honda]

you can swap 5th gen accord front hubs on... for the rear your going to have to get tricky... not worth the touble... you could order some adapters from ebay for $100 but then your wheels are going to stick out farther

[PeterNtheWolf]

thanks for the advice yall

I wanted to put acura rims on 16 x 6 . i would do an adapter if that would work well...im still lookin into what rims so ill take suggestions

are their any lightweight hubs that are at least 205, 4x100mm?

[RAZR]

go into the suspension section and click the wheels sticky it gives all the rims compatable with 3gee accord