a20a3 automatic tranny swap

[prince_frog]

Ok I have gather some information on transmission swap and was just wandering if i am correct. I am trying to do a a20a3 automatic transmission swap over to a 5spd transmission. But unlucky in my area it has seem to be hard to find any 3 geez 5 spd tranny. So after reading post/threads, I figure that the
B18A integra transmission is compactible(spelling?) with the a20a3 as they share similar or same parts. But my question is that can you use a b18a 5spd tranny with the stock automatic a20a3 bell housing to mate the tranny onto the a20a3 engine? I know that the flywheel, clutch assembly, clutch cable/pedal also will need to be changed over. But can all this come from a
b18a integra cable? any advise will greatly be appreciated. thanks

[MessyHonda]

the b series trans will not work with the a20 motor...only some internal componets are swap able but you will still need a a20 trans

[prince_frog]

ok thanks alot

[Dr_Snooz]

Where are you at?

[prince_frog]

MN, I have check junkyards all over metro area, craigslist, and ebay. Nothing i can find but only b18 parts. I don't want to swap in b16/b18 engine into my accord, I want to preserve the a20 engine with respectable horsepower only.

[Dr_Snooz]

Try www.mantrans.com