pcd100 to pcd114.3

[ca1perfection]

hello,im new here, can we convert our 3rd gen accord pcd100 to pcd114.3 ? by using dc2 1st badge 4 hole 114.3 or accord 114.3 ? thanks for the help,as i cant find the page to solve my question here.

[A18A]

what do you mean by "using dc2 badge 4 hole 114.3"?

[ghettogeddy]

i believe hes talking about swapping lug patterns form 4x100 to 4x114. not 100% sure on the badge but must mean first generation dc2. w/e that is

its would be alot of fn work to swap not that its impossible just more work then is needed to have a set of wheels fit
that most likely come in 4x100 somewhere

[A18A]

yeah it was the badge part that confuzzled me. i converted my project car to 4x114.3 but that took a fair bit of work

[Nafs Asdf]

I'm sure you could get some lug pattern conversion spacers made up.

[ca1perfection]

Thx for response,sorry for my poor English . Yes is the lug conversion, just hope can get info on how n which Honda's 114.3 4hole lug suitable for our 3rd gen accord. Like example, we can use odyssey 5 lug front and dc2 5 lug rear convert to 5th gen accord. If our 3rd gen can convert 114.3 5 lug or 4 lug that will be cool to fit some jdm wheel.

[Oldblueaccord]

https://www.3geez.com/forum/showthread.php?t=73403

I think Tommy converted to the 4 x 114 on his car. His car is the bright green one.


wp

[Legend_master]

i believe hes talking about swapping lug patterns form 4x100 to 4x114. not 100% sure on the badge but must mean first generation dc2. w/e that is

its would be alot of fn work to swap not that its impossible just more work then is needed to have a set of wheels fit
that most likely come in 4x100 somewhere

DC2 is an Integra, but the only 4x114 integra I know of is a 97 TypeR, and those are rather rare. ca1perfection what wheels are you trying to put onto your car? there are a lot of JDM wheels that come in the 4x100 pattern.

[ca1perfection]

Found a cheap rp01 rim,but the pcd is 114.3 4 hole. Was thinking if we can use dc2 lug,can improve brake system too. Thanks for sharing the link. i heard we can use adjustable from civic ek right? is that true?

[Legend_master]

Found a cheap rp01 rim,but the pcd is 114.3 4 hole. Was thinking if we can use dc2 lug,can improve brake system too. Thanks for sharing the link. i heard we can use adjustable from civic ek right? is that true?

I don't know that it would be worth converting to 4x114 just for a set of rims. There are a ton of 4x100 rims that are well priced and provide the same level of performance, and style. As for the other questions, here are a couple links below, but just a heads up there is a great search function built into the forum that will allow you to search all the information you need.

Integra brake upgrade. You have to re-drill the rotors.

Full body coilover mod

You can acutally buy full body coilovers for our cars now, there is no need to use the civic/accord mix.

[ca1perfection]

thank you legend master, i always admire your accord with b seires engine,so clean. Sad i cant get your model over my country because of left hand drive.

yea maybe i will stick with original pcd, =)

[Legend_master]

thank you legend master, i always admire your accord with b seires engine,so clean. Sad i cant get your model over my country because of left hand drive.

yea maybe i will stick with original pcd, =)

Thanks man. I don't know where you are from, but I wish we could get the Aerodeck in the US. So Honda screwed us both over lol.

[ca1perfection]

lol.. you are right bro,i drive aerodeck in malaysia, but my aerodeck now is still got looooooooong way to rebuild it,the condition is so bad. So now i look for more info to mod it n repair ,thank you for helping me.

[ca1perfection]

its ok,i found myself a old mugen rim pcd100 ...hehe thx for the info.