hey rich, i'm pretty sure the valve reliefs are the same on both sides. i'm going to use the rings that came with them with the recommended ring gap. I have exactly an 81mm bore. I'm on a semi limited budget right now, so with that said, there isn't going to be any head work done on this motor out side of the cam and valve springs. i'm not trying to shoot for crazy power, just for good power and reliablitly. i've still got to spend some money on some extreme valving for my koni's because ultimately, thats going to make a bigger difference than another 15-20hp.
I got a new battery (odyessy pc680) and the crank scraper, new oilpressure/water temp gauges, and the rest of my EDIS parts from chris on the way... I just need to find time to take my crank to the machine shop!
Bookmarks