came across this on facebook, no more info
came across this on facebook, no more info
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
I could set an H22 in an empty engine bay and set my car on 5-lug wheels without axles and call it good. No video, no proof, no nothing?
i put a h22 in my accord engine bay once but the engine was too wide to fit past the frame rails properly while keeping p/s, I'd like to know how others kept their p/s with h22 swaps =/
look at Malaysia they do crazy swaps...tommy has posted some pics
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
well u can clearly see no drivers mount and there does look like there nothing behind the rim. just asking
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
If you look at the wheel its tucked in there alittle too good.
un-motivated!
someone make me an offer i just could not say no to.
3GR
huh i seen this somewhere before i think he drives a 2006 accord coupe and has a 3gee as the project. ill try to find his face book.
heres his car album:http://www.facebook.com/photo.php?fb...078186&theater
well it looks like there nothing there and looks like they are his old accord wheels just under the car.
Last edited by ShyBoyCA6; 02-13-2011 at 11:08 PM. Reason: Found the person that owns the car.
Hmmm, after staring at those for a while, the pinstripe from his coupe doesn't seem to match the one with the H22 "swap". Plus, his ghetto wrong date print isn't there.
Woah, woah: he's friends with some people from 3geez...?
There is definitely no suspension attached to those wheels, and that engine is leaning way to far back to actually be mounted in place. Would be a badass car if it were actually done.
Seems like the rim just there not even bolted up. Half ass swap. There was a guy near me like 1 hr away. Motor in and axles in. Just needed the wiring done. I could of done that. BUT he said it sat so long that he didnt know if the motor ran.
200+ ALL MOTOR LS VTEC
I know its beensaid more than once but you can see the ground through the wheels easy, but seems like alot of trouble to just take a picture!
hasn't there been a 5 speed lug swap before???
Really it wouldnt be that hard, the wheel bearings used in our hondas are the same as all the others. If you swapped the inner hubs out, itd be done no problem
Yes, its been done, but whats a point in doing that? there is tons of wheels we can use, and there is a custom parts list for custom build big brake kit. There is nothing to gain, not really winth 5lug.
Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...
My Build Thread
^ good point, i never understand the five lug swap beyond trying to be a baller...
dead white and blue
Custom
Go get some used 14/15" BBS from germany, than order new bolts and outer ring, they are not that expensive if you keep your lip in check, cuz they range in price. than weld bolt holes and get a shop to machine you a new patern say 4x120. powder cote to mutch your cool orange car and youre set. it can be done for half price of shelf price.
Last edited by Tomisimo; 02-08-2012 at 08:55 PM.
Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...
My Build Thread
Bookmarks