want to go lower than low

[89accordvtec?]

my car sits low already, the back can be dropped way more than i'll ever want it, but the front can't go any lower without the upper control arm hitting the body. i can cut and weld if need be, but is there another way to get it lower without damaging the body?

[ShyBoyCA6]

search man been discussed already

[89accordvtec?]

i checked the pinch fork mod, and i couldnt find anything that really describes wat the the prelude arms will do. and other than those 2 things i cant think of anything else to search

[A18A]

unless you get a shorter hub off something else, cutting a hole is probably the only way you can get it to go lower

[forrest89sei]

[QUOTE=89accordvtec?;1064327]i checked the pinch fork mod, and i couldnt find anything that really describes wat the the prelude arms will do. and other than those 2 things i cant think of anything else to search[/QUOTE

People Install the Prelude Arms due to them Offering Better Camber Adjustment

[charliekuney]

People Install the Prelude Arms due to them Offering Better Camber Adjustment

Also to correct the camber issue that occurs when lowering the car on the factory arms, correct?

[Tdurr]

Also to correct the camber issue that occurs when lowering the car on the factory arms, correct?

u gotta have adjustment to fix the issue.. same thing he said just different wording lol.

[Strugglebucket]

Get some 10" daytons.






(and if you ask me what daytons are, i'm gonna feel real old)

[RAZR]

check out Hondamonsters thread. he is lower than low is low

but once you start going lower and lower you are gunna start screwing stuff up.

[charliekuney]

u gotta have adjustment to fix the issue.. same thing he said just different wording lol.

Haha, I realized that right after I posted. I had to read it over a few times. :/

[89accordvtec?]

thanks razr. i got all the info i need from hondamonsters thread. that and the tophat mod. definately gunna make a skid plate before i go that low tho. lol

[MessyHonda]

check out Hondamonsters thread. he is lower than low is low

but once you start going lower and lower you are gunna start screwing stuff up.

no you will just need mounts to raise the engine so your oil pan wont drag

[89accordvtec?]

thats my biggest worry, but if i end up as low as he is i'll have a skid plate tougher than i'll ever need. lol

[Christofur]

have pics?

[89accordvtec?]

of wat?

[88lxi-shortram]

how low u r

[A18A]

44 gallon drums cut out make good skid plates

[89accordvtec?]

how low u r

http://www.cardomain.com/ride/3890115/1989-honda-accord

most recent pics at the bottom

[89accordvtec?]

44 gallon drums cut out make good skid plates

lol, that's what i was goin 2 use if i could find one that wasn't rusted out