"JohnDriver -1987 accord stretch limo - Project In Motion"

[JohnDriver]

Yes if there off a Coupe, Coupe Lights won't fit on a Sedan

ok,just soas I follow you.its not the year difference? its the coupe/sedan?
Fn great,well I guess I found my excuse to buy a coupe..lol
theres a guy around the corner with one,I have been wanting one for a while.
and you guys gotta catch me up to speed,WTF is:
Mark III is just a tortoise
Vigor lights would make it look "Lincolnish" like a Mark III aka taurus hull
please explain ALL the nouns.lol
kinda years make model north american/euro/japan?
THANKS guys!!!!

[forrest89sei]

ok,just soas I follow you.its not the year difference? its the coupe/sedan?
Fn great,well I guess I found my excuse to buy a coupe..lol
theres a guy around the corner with one,I have been wanting one for a while.
and you guys gotta catch me up to speed,WTF is:
Mark III is just a tortoise
Vigor lights would make it look "Lincolnish" like a Mark III aka taurus hull
please explain ALL the nouns.lol
kinda years make model north american/euro/japan?
THANKS guys!!!!

The 3rd Gen Accord Coupes were made starting 1988-1989, They also hold alot of history as they were the first Japanese Car to be built in america and exported to Japan, The JDM Accord Coupe was no diffirent from the american one except for the Front Corners and a couple Honda of America Badges, It was even exported to Japan RHD.

So now that we've learned our little bit of history, Yes Only Coupe Tails will fit on a coupe, The Tails have the black plastic on them where a Sedan has Metal.

Ok now what fits your car with no mods?

Well being a 1987, Any 1986-1987 USDM Accord Sedan Tails
Any 1985-1986 JDM/EDM Sedan/Saloon Tail Lights From a Accord

Ok what fits your car with Minor Mods? Well if you get a trunk lid from a 1988-89 Sedan then you can use the 1988-1989 Accord Sedan Tail Lights

Ok What About JDM Vigor? Well as I've posted They come in 2 Flavors, theres your 1985-1986 and then theres your 1987-1989 (Facelift)

With your Current Trunk Lid you can fit 1985-1986 JDM Vigor Lights, If you can get someone to send you the Plate Holder, or if you do something Custom for the plate, your Set everything bolts into place

If you install a 1988-89 Accord Trunk, then you can use the Lights that were offered on the 1987-89 JDM Vigor, It still requires you having to mount the plate somewhere else, but the 1988-89 USDM Accord Tail lights are the same as the 87-89 JDM Accord Tail Lights, so all you need is the Vigor Trunk Part to convert.

Ok now Pics of Each thing!

1986-1987 USDM Accord Sedan:

1988-1989 USDM Accord Sedan:

1985-1986 JDM/EDM Accord Sedan:

1985-1986 JDM Vigor:

1987-1989 JDM Vigor:

As Far as All these Lincoln Terms, I have no Idea, I've never been into them lol

I Hope this helps you

Forrest

[A18A]

just remember if you want the vigor center, you will have to weld in a bit of metal where the accord has the dip thing under the number plate area

[JohnDriver]

THANKS GUYS
now I'm on the hunt,I really like the vigor tail setup but if I cant find the center panel I'll just smooth it and move the Backup lamps to the bumper.
I really like the vigor lights with the turn in the ends,just cause it isnt like the us version,or any clears.but now I have alot more keywords.lol

[A18A]

if you go for the vigor rear, i'll have a facelift number plate housing you can buy off me lol

[forrest89sei]

if you go for the vigor rear, i'll have a facelift number plate housing you can buy off me lol

I think he's going to need help from you or Aaron to find the Early Vigor Trunk Part and JDM Tails

[JohnDriver]

hey,if I find one(s)what is a reasonable price for the vigor center in good shape? and what about the taillights? or the clear taillights? THANKS

[JohnDriver]

some old pics from when I first got it

[cygnus x-1]

Quite a unique project you have!

I think for the engine I would go one of two ways. Either a turbo A20 or a turbo B18. The turbo will give you enough torque to move all that weight, and being 4-cyls they will easily fit without serious chopping. Obviously the A20 would be more period correct (being original) but the B18 would have more aftermarket support. The B18 will also have more support in terms of transmission mods. With that much weight you will need a tough transmission. Clutchnet makes some tough clutches for either engine so you might consider them.


C|

[adamus]

needs less 20's more slammed on 13"x8" watanabe's

[hammer3rd]

For that projest I would go with a sroked B20B or Z. They will make more uesable torque ata much lower rpm to all that weight. The turbo is a great thing but a well built stroker motor will out preform a turbo with way less service and tuning.

[JohnDriver]

finally got around to tinkering with the carb. the float level was too high. and it was overfilling the bowl. got it set better. prob needs more tweaking.

I got a gig with bobspropshop.com so Im really focusing on my prop cars(BTTF delorean,KITT,and ECTO-1.) that we are building at the shop.

anyone interested in the honda limo? I cut the price in half $2500.00
had 2 offers last time for 25/3000.
is that a fair price? I think I was a little high before. but really didnt want to part with it.(its my favorite car to drive)
but I think it needs a better home.someone on here would take good care of it.

[griffs68]

did you ever sale this?

[Natefarish]

This exact car is in my drivway!

[AccordB20A]

and why arent you posting pics and making it awesome?

[MessyHonda]

any updates?

[Dr_Snooz]

Troll.