I have a bad crack in my subframe in the front and i need to find a new one. Does anyone have one they will sell me or know where to get one for a good price?
I have a bad crack in my subframe in the front and i need to find a new one. Does anyone have one they will sell me or know where to get one for a good price?
Last edited by Charbo88; 05-22-2011 at 03:17 PM.
I had a friend weld it temporarily and it seems to be alot better, but would my best bet be to get one at a junkyard? it is cracked pretty much all the way up except for a tiny bit at the top. It is the beam that goes across to hook the lower arms together right up by the power steering rack. Does anyone have a car they are parting out or something that can help me out?
No rust, i'm not sure why it cracked everything else looks fine. I could have him do that I just wasnt sure if that would be as good as getting a new one. How hard will it be to pull it out? It looks like I have to remove the center crossmember and the steering rack at least. I have to get a new steering rack as well so if it is ok like it is for about 2 weeks then I could do them both at the same time.
Alright, I will just be careful until I can get the rack and then pull it all out and see. I bought some steel at home depot we just couldnt get up in there to weld it on without pulling it out.
just be careful, normally i would say replace the part, but it may be really hard to find
Maybe a bit late on this one, but if you go to the wreckers, try to find a car that has the engine already removed, it'll be a lot easier to get that crossmember out. I say replace it if you can, but this is coming from the guy that made his own crossmember out of junk.
Bookmarks