Results 1 to 6 of 6

Thread: my Carbed '89 DX stalling when warmed up? input please..

  1. #1
    LX User detroit313's Avatar
    Join Date
    Aug 2005
    Vehicle
    1988 accord LX-I
    Location
    Detroit
    Posts
    135

    my Carbed '89 DX stalling when warmed up? input please..

    My 3 gee peeps! Been a very long time. been out of the 3gee game a while. since I sold my '88 LX-I few years back. I come to you once again with a question! recently purchased a 1989 accord DX ((carbed)) with 140,000 miles on it. runs like a raped ape! nice acceration no leaks at all and handles nicely!!
    Problem is it stalls out when stoping @ red lights etc.. didn't find any bad vacuum lines leaking or anything. this thing is totally stock! Everything is there & untouched. Have any ideas on what it causing the issue? I don't wanna start dropping needless $$ into it. going to start by replacing the PCV this week. i changed the plugs,blew the hell out of the carb with carb cleaner & all the little stuff....only stalls AFTER the engine is totally warmed up! Starts right back up no problem! if slightly pressing the pedal it wont ever stall. like low idle or something...any help would be greatly appreciated..



  2. #2
    LX User detroit313's Avatar
    Join Date
    Aug 2005
    Vehicle
    1988 accord LX-I
    Location
    Detroit
    Posts
    135

    Re: my Carbed '89 DX stalling when warmed up? input please..

    Cmon man! One of u experts gotta have something!!

  3. #3

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: my Carbed '89 DX stalling when warmed up? input please..

    dam I was in here several times yesterday and never saw this thread!

    I would first plug off the vacuum advance lines one at a time to see if that made a difference.
    Then if I didn't find anything after say 30 minutes of messing with it I would buy a weber conversion. lol
    It must be stalling lean if it starts right back up like that, so yeah, vac leak.

  4. #4
    DX User marklj's Avatar
    Join Date
    Mar 2008
    Vehicle
    1988 Accord DX
    Location
    North GA
    Posts
    88

    Exclamation Re: my Carbed '89 DX stalling when warmed up? input please..

    If you have checked for obvious vacuum leaks, maybe something as simple as the base idle speed? Check the hood decal for specs, but I believe it is around 750 rpm for the auto. 850 for a stick. +-50 rpm. Don’t trust the factory dash tachometer. Use one of the dwell/tachometer/voltmeter automotive analyzers.

    If the base idle is OK, the next thing to check may be the idle mixture adjustment. You can confirm if it is too lean by a little spray of carb cleaner with the engine fully warmed up. If the revs pick up a lot, 100 – 200 rpm or more, then the idle mixture should be adjusted.
    Last edited by marklj; 08-29-2011 at 04:17 PM.
    Mark L. Johnson

  5. #5

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,638

    Re: my Carbed '89 DX stalling when warmed up? input please..

    I'd bet if you just start using quality, high-grade gas, the problem will go away in a few months. If it doesn't, then rebuild the carb.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  6. #6
    DX User
    Join Date
    Jun 2012
    Posts
    23

    Re: my Carbed '89 DX stalling when warmed up? input please..

    Quote Originally Posted by detroit313 View Post
    My 3 gee peeps! Been a very long time. been out of the 3gee game a while. since I sold my '88 LX-I few years back. I come to you once again with a question! recently purchased a 1989 accord DX ((carbed)) with 140,000 miles on it. runs like a raped ape! nice acceration no leaks at all and handles nicely!!
    Problem is it stalls out when stoping @ red lights etc.. didn't find any bad vacuum lines leaking or anything. this thing is totally stock! Everything is there & untouched. Have any ideas on what it causing the issue? I don't wanna start dropping needless $$ into it. going to start by replacing the PCV this week. i changed the plugs,blew the hell out of the carb with carb cleaner & all the little stuff....only stalls AFTER the engine is totally warmed up! Starts right back up no problem! if slightly pressing the pedal it wont ever stall. like low idle or something...any help would be greatly appreciated..
    hii i have the same problem in my 87 carb you have fixed the problem tell me how ?

Similar Threads

  1. Idle reving. . till warmed up
    By -$MOKIN- in forum Performance
    Replies: 3
    Last Post: 03-03-2009, 08:53 AM
  2. Idle trouble after warmed up
    By leem in forum Carburetor Tech
    Replies: 3
    Last Post: 07-19-2007, 08:10 AM
  3. Pulls slightly harder when not warmed all the way up?
    By FyreDaug in forum 3geez Accords
    Replies: 7
    Last Post: 07-26-2006, 12:18 AM
  4. Warmed Up = More Power
    By HondaBoy in forum 3geez Accords
    Replies: 8
    Last Post: 01-27-2005, 09:21 PM
  5. rough & wierd idle after engine fully warmed
    By wolfort in forum 3geez Accords
    Replies: 2
    Last Post: 03-21-2004, 10:21 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink