Hard too start and wont stay on

[Lg310]

Ok here we go lately my rpms have been acting funny and also my vacuum has been acting up. today after day driving i was going to go out and try to start it it wouldn't it had been doing this so i did the usual floor it and cranked it started very forcefully. right after it would start it would shut right down so i took of the air filter cover and the little screen on the carb and i saw that both jets were going crazy dripping gas both ports had a nice puddle on the bottom. ok im almost sure i need to over haul the carb but is there anything i can do to fix that problem without disconnecting all the lines and removing the carb from the base hope to get a lot of opinions and thoughts on what to do thanks in advanced

[Dr_Snooz]

You're pretty much done, I think. Being in California, the Weber swap isn't an option for you either. So you're stuck with the OEM carb. Which will be joyful to get rebuilt right. Sorry bro.