Results 1 to 11 of 11

Thread: Turn signals stopped working after putting hazards on... yikes

  1. #1
    DX User
    Join Date
    Apr 2010
    Posts
    15

    Turn signals stopped working after putting hazards on... yikes

    Yesterday I put my hazard lights on because I was parked in a somewhat funky place. I don't think the hazard lights ever came on but when I came back to my car and started it I noticed my turn signals were not working. Basically nothing happens when I activate either turn signal (inside the car or outside).

    I have checked the fuse underneath the steering wheel but it is not burnt out as far as I can tell. What would be the next thing you guys would check?



  2. #2
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: Turn signals stopped working after putting hazards on... yikes

    Quote Originally Posted by 6eHonda View Post
    Yesterday I put my hazard lights on because I was parked in a somewhat funky place. I don't think the hazard lights ever came on but when I came back to my car and started it I noticed my turn signals were not working. Basically nothing happens when I activate either turn signal (inside the car or outside).
    I have checked the fuse underneath the steering wheel but it is not burnt out as far as I can tell. What would be the next thing you guys would check?
    hazzard switch isn't all the way on or off, wiggle the switch

  3. #3
    DX User
    Join Date
    Apr 2010
    Posts
    15

    Re: Turn signals stopped working after putting hazards on... yikes

    Quote Originally Posted by lostforawhile View Post
    hazzard switch isn't all the way on or off, wiggle the switch
    I've been wiggling the switch like crazy. I've only had the car for about a year now and have not had this problem before, but also, I have not used the hazards before.

  4. #4
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: Turn signals stopped working after putting hazards on... yikes

    Quote Originally Posted by 6eHonda View Post
    I've been wiggling the switch like crazy. I've only had the car for about a year now and have not had this problem before, but also, I have not used the hazards before.
    if they went out when you turned on the hazards then it's the switch, there is a sticky somewhere on how to take that entire combination switch apart, the turn signal wiring goes through that switch

  5. #5
    DX User
    Join Date
    Apr 2010
    Posts
    15

    Re: Turn signals stopped working after putting hazards on... yikes

    Quote Originally Posted by lostforawhile View Post
    if they went out when you turned on the hazards then it's the switch, there is a sticky somewhere on how to take that entire combination switch apart, the turn signal wiring goes through that switch
    I will look for the sticky thank you. hopefully i can get it. maybe more wiggling/smacking/punching of steering wheel is in order.

  6. #6
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: Turn signals stopped working after putting hazards on... yikes

    Quote Originally Posted by 6eHonda View Post
    I will look for the sticky thank you. hopefully i can get it. maybe more wiggling/smacking/punching of steering wheel is in order.
    Russiankid wrote it

  7. #7
    LX User
    Join Date
    Nov 2006
    Vehicle
    88 DX 5spd sedan 176Kmiles, 1 owner, stock. (Sold 10/18)
    Posts
    301

    Re: Turn signals stopped working after putting hazards on... yikes

    Same problem happened on my 88 several years ago, (with a little help from a 4 year old.) I was getting ready to replace the switch assembly but thought to blast the whole thing with contact cleaner before taking it apart. Sprayed into the switches and worked them back and forth. ....worked like a charm and still working today.
    I used the non-flamable 'CRC' brand, be careful of more aggressive solvents that may damage plastic.

  8. #8
    3Geez Veteran lostforawhile's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 hatchback, 1990 Lincoln Towncar
    Location
    nowhere GA
    Posts
    15,401

    Re: Turn signals stopped working after putting hazards on... yikes

    just get some electrical contact cleaner, the only issue with that, is it washes out the special grease that protects the contacts. if you take it apart and clean it, and regrease you'll be better off

  9. #9
    DX User
    Join Date
    Apr 2010
    Posts
    15

    Re: Turn signals stopped working after putting hazards on... yikes

    Quote Originally Posted by lostforawhile View Post
    just get some electrical contact cleaner, the only issue with that, is it washes out the special grease that protects the contacts. if you take it apart and clean it, and regrease you'll be better off

    I have never had to use any sort of electrical contact cleaner, where would I look to purchase such a thing or do you maybe know of a decent brand so I can search for it at the auto store? Thank you guys again, luckily I haven't had to drive anywhere recently as I make a lot of turns

  10. #10

    Hash_man_Se_i's Avatar
    Join Date
    Sep 2002
    Vehicle
    1988 EX-i 4dr, 1989 se-i 4dr (RIP), 1989 se-i 4dr (RIP), 2006 TSX
    Location
    Calgary, AB, Canada
    Posts
    3,816

    Re: Turn signals stopped working after putting hazards on... yikes

    Yea, you would find it at an auto parts store, most should carry it.

    I used to have this problem on my old se-i, couldn't fix the switch, so ended up having to replace the combo switch, which I now have to do on my ex-i and you may have to do if this doesn't remedy the problem.

  11. #11
    DX User
    Join Date
    Apr 2010
    Posts
    15

    Re: Turn signals stopped working after putting hazards on... yikes

    While driving to school for a math test the blinkers started working again. I thought for sure this was a good omen but the math test was extremely difficult. I guess it was just my honda being its weird self. it was overheating for about a month this winter and then it just stopped all out a sudden and now the a/c works even though it didn't last summer.

    I will be sure not to try to activate my hazards in the future unless absolutely necessary. Thanks for all the advice anyway I would have found it useful I'm sure if it were not for my car being possessed.

Similar Threads

  1. Replies: 29
    Last Post: 07-16-2012, 01:29 PM
  2. Turn signals stop working when it gets hot outside.
    By thooper41 in forum 3geez Accords
    Replies: 4
    Last Post: 09-14-2009, 12:18 PM
  3. My CC stopped working?
    By codyJDM in forum 3geez Accords
    Replies: 8
    Last Post: 06-17-2008, 09:30 PM
  4. Blinkers stopped working!?!?
    By superaccord in forum 3geez Accords
    Replies: 9
    Last Post: 05-02-2004, 09:52 AM
  5. Help... Subs stopped working...
    By crwa in forum Interior & Exterior Care
    Replies: 6
    Last Post: 01-11-2004, 05:22 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink