Results 1 to 20 of 20

Thread: Cheddas Auto website officially launched

  1. #1
    LX User
    Join Date
    May 2011
    Posts
    103

    Cheddas Auto website officially launched

    I figured it was about time to launch a website. So I've launched a semi-begginer website with most of my products, i know it doesnt list accord parts on the web store, but i assure you that the shifters do fit, as they fit in the preludes. This has been proven. And i assure you that i will be working on other things like bushing kits for these cars ect, as time rolls on.

    Please join and add photos to the photo gallery to get a chance to win a 10% discount on your next pruchase.

    http://www.cheddasauto.webs.com



  2. #2

    Nio's Avatar
    Join Date
    Dec 2009
    Vehicle
    1989 Accord SE-i
    Location
    Coronado, Ca
    Posts
    970

    Re: Cheddas Auto website officially launched

    Thanks.

    Joined up and dropped some pictures. My car isn't that great looking right now, but thanks to recent events I'm working on her again.

    Forgot to mention, I bookmarked the site into my accord folder. can't wait to see the products.
    Yea for photoshop...No license plate. :3


    "If I shoot a leprechaun, will Lucky charms explode everywhere?"

  3. #3
    LXi User bryan6732's Avatar
    Join Date
    Aug 2008
    Vehicle
    VW Polo G40, 1986 Aerodeck EX (sold), 1987 Aerodeck EXi (RIP)
    Location
    The Netherlands
    Posts
    633

    Re: Cheddas Auto website officially launched

    Bookmarked, registered and currently updating photos of my Aerodecks.

  4. #4
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    wicked aerodeck, would love to have one dude.

    The site is open and im ready for any kind of order. Send me a message, post on here, whatever, just let me know what you want.
    Last edited by chedda_jsauto; 10-08-2011 at 11:02 AM.

  5. #5
    LXi User bryan6732's Avatar
    Join Date
    Aug 2008
    Vehicle
    VW Polo G40, 1986 Aerodeck EX (sold), 1987 Aerodeck EXi (RIP)
    Location
    The Netherlands
    Posts
    633

    Re: Cheddas Auto website officially launched

    Thanks mate!

    Gonna let you know in a while about a short shifter.
    I'll have to figure out which one I want first, and get the money together!

  6. #6
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    Right on, let me know sir.

  7. #7
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    Finally ready to make some advancements in the accord world. Ive tested my bushings on my car and my shifter bushing kits do work. They replace the lower end shifter bushings, the transmission mount bushings, and the U joint bushings. These bushings utilize the hardness of poly propelyne without having to use steel bushing sleeves. For those of you who have a loose shifter due to poor bushings, this is your answer. Ive sold over 100 kits already for the crx/civic and integra, now they are available for the prelude and accord.

    Again, the kits include, new bolts, nuts, bushings and transmission flat washer. The only work you have to do is remove the linkage and replace the bushings by pressing them in with a small hammer or vise. For the unserviceable u joint bushings, you will need to remove the linkage, grind off the rivet, and replace with the new bushings and bolt.



    http://cheddasauto.webs.com/apps/web...s/show/2725497

    Looking for a group buy of 10 sets, please post if your interested.
    Last edited by chedda_jsauto; 10-20-2011 at 09:21 PM.

  8. #8
    3Geez Veteran gfrg88's Avatar
    Join Date
    Jan 2005
    Vehicle
    1986 Honda Prelude 2.0Si-T
    Location
    A Mile High.
    Posts
    4,788

    Re: Cheddas Auto website officially launched

    Put me down for a set
    -Gio
    .
    .
    My E85 Turbo Build
    .
    .
    5280FEST
    .
    .

  9. #9
    LX User Australian 86's Avatar
    Join Date
    Mar 2011
    Posts
    149

    Re: Cheddas Auto website officially launched

    Hey chedda, would it be possible for you to show us some pics or a link to how the "unfixable" u joint bushing is modified?
    Also, are there any other bushings that would be good to change in relation to the shifter, or have you covered them all?
    Thanks!

  10. #10
    LX User 89jdmaccord's Avatar
    Join Date
    Jul 2010
    Vehicle
    1987 honda accord lx-i hatch and 2000 honda civic si, rip 1989 honda accord lx-i coupe
    Location
    north carolina
    Posts
    209

    Re: Cheddas Auto website officially launched

    Just joined and uploading pictures as we speak haha will keep you in mind

  11. #11
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    Quote Originally Posted by Australian 86 View Post
    Hey chedda, would it be possible for you to show us some pics or a link to how the "unfixable" u joint bushing is modified?
    Also, are there any other bushings that would be good to change in relation to the shifter, or have you covered them all?
    Thanks!
    Heres an illustrated look at the joint, two bushings can be replaced, but two cannot. So the kit will come with the two that cannot, it will require you to grind off the heads of the rivet, and replace with the supplied bolt in the kit. It also comes with two more bolts for the shifter lever and the other U joint bushing. Also includes one large fender washer for the transmission mount. Includes four bushings for the U joint, and two for the transmission mount, and two for the shift lever.

    I can take an upclose picture pretty soon here. The kit will include all the blue circled bushings, and the red circle is the unserviceable u-joint. In response to your question, there is a square bushing in the rear behind the shifer, you should replace it too, but dont buy poly urethane, buy stock, as the poly ones will rip.

    Last edited by chedda_jsauto; 11-08-2011 at 09:15 PM.

  12. #12
    LX User Australian 86's Avatar
    Join Date
    Mar 2011
    Posts
    149

    Re: Cheddas Auto website officially launched

    in relation to the square bushing do you mean no.22? I have seen alot of them around...

  13. #13
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    You are correct, #22, its better to use the stock one from honda, because the ones from prothane or energy rip very easily. I was actually thinking of making one to go with my kit, but thats in the future. Btw, your getting the first set made out of Delrin rather than Poly, you can test them out for me, its a even better material. It cost me a little more for materials, but your such a special guy I figured I could afford giving you the first set at the cheaper rate.
    Last edited by chedda_jsauto; 11-09-2011 at 05:24 PM.

  14. #14
    LX User Australian 86's Avatar
    Join Date
    Mar 2011
    Posts
    149

    Re: Cheddas Auto website officially launched

    Thats Awesome Chedda, thanks for that!
    I hope being "special" isn't being used in an inverted comma way...

    So you think that the no.22 bushing that energy suspension make is no good? So really OEM is the only option...

    Thanks again for going the extra mile mate!

  15. #15
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    Haha your the first buyer of this product so your special in a good way.

    I was asked on three different occasions to make a hard mount for those square bushings for this exact reason, that they are poor, and the aftermarket poly ones are so soft that they rip. My thought was to make a hard plastic one that was a two piece bushing, that would fit over the linkage stub, then clamp together when you put the two mounting bolts back into the carriage. It would obviously leave some play, but i would hope for it to be way more fluid.

    One day I will build this, but not right now.

  16. #16
    LX User Australian 86's Avatar
    Join Date
    Mar 2011
    Posts
    149

    Re: Cheddas Auto website officially launched

    ok good. Im special.
    What do you reccomend then? just keep using the one i already have or order a replacement oem one?

  17. #17
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    Quote Originally Posted by Australian 86 View Post
    ok good. Im special.
    What do you reccomend then? just keep using the one i already have or order a replacement oem one?
    They are pretty cheap from honda, but I would inspect your stock one first, it may be in good shape still.

  18. #18
    LX User Australian 86's Avatar
    Join Date
    Mar 2011
    Posts
    149

    Re: Cheddas Auto website officially launched

    HA!
    Cheap from Honda maybe in the US.
    Over here Honda parts are ridiculous!
    For example;
    OEM Shock mount bushing in Australia $60
    bought 2 of Rockauto with other parts for about $16
    Admittedly the postage was half the cost of all the parts i ordered it was still about a third of the price here.
    Another example;
    No name air filter from a auto shop $46
    Rock auto $8, and yes postage would have been at least that much again... but SOOOO much cheaper overall!

  19. #19
    LX User
    Join Date
    May 2011
    Posts
    103

    Re: Cheddas Auto website officially launched

    Check it out, some Delrin bushings for you sir. Almost done.

    Before



    After

  20. #20
    LX User Australian 86's Avatar
    Join Date
    Mar 2011
    Posts
    149

    Re: Cheddas Auto website officially launched

    Aww sweet! This is part of the reason I'm so proud to be a 3g accord owner. This site has such a wealth of support and dedicated people like chedda.
    Thanks very much chedda, I'm so excited to be getting these shiny new derelin bushings, and very honoured!

Similar Threads

  1. Tokicos officially installed
    By codyJDM in forum Suspension/Wheels/Tires/Brakes
    Replies: 48
    Last Post: 08-14-2008, 12:21 AM
  2. I found this on on a auto tuning shop website..
    By twofast4u in forum Classic Honda Pics & Videos
    Replies: 41
    Last Post: 09-16-2006, 02:31 PM
  3. Insurance Auto Auction Website
    By Jonessoda27 in forum Classic Honda Community Chat
    Replies: 1
    Last Post: 04-03-2004, 04:09 PM
  4. Accidently launched car and loosened a bunch of stuff.
    By HondaManDan in forum 3geez Accords
    Replies: 18
    Last Post: 11-11-2002, 02:54 PM
  5. im officially selling my system
    By Neuspeed007 in forum Interior & Exterior Care
    Replies: 6
    Last Post: 11-09-2002, 08:16 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
VigLink badge