It looks a lot better than what it used to. The hood doesn't look too bad and I'm sure it can be fixed but the trunk definitely need to be white. Damn! a liter of oil is a lot but at least you have VTAKKK!........umh, what with the "teg" in the bumper?
some idiot bogged the rest of the word integra so it said teg. it fails. needs new bumpers anyway but thats alright.
today i pulled the smokey fuked b18Cr motor out
now you see it
now you dont
got the b20b block on the engine stand now, removed the sump and cleaned all the filthy oil out of there.
i fitted the water pump and tensioner and cambelt cam covers and crank pulley.
The head is also at a workshop getting the new dowel pin holes drilled and the npt 3/8" fitting tapped in the head for the VTEC oil line
more pics when i get the head back
took off the sump and gave it a mighty clean, the oil looks like its only been changed 5 times in this engines life!
i hope it runs alright and doesnt knock or anything bad haha
put the sump on and used lots of gasket maker shit to ensure i get no leaks on my garage floor
also installed the alternator
and now we are waiting on the head. apparently its hard to find a 14mm drill bit and a 3/8" NPT tap for the VTEC oil line! fucker
fucking nice aaron. you always do work man.
200+ ALL MOTOR LS VTEC
I hate you! Just playin'. Nice effin car man. I would love to just drive a right hand drive car and here you are rebuilding an itr, lucky. dam good work though and the black hood and trunk look coll
Low loud lovin it!
bosozoku inspired 86 LX-I hatchie
~~~~~~~IG @the_boso_3g~~~~~~~
i finally decided to put the ITR helical LSD ive had for a while now into my b series EG6 gearbox for when i put the b20b in the car.
take one y21 bellhousing/case and remove anything that can get aloy grindings in it
grind the fuck off the ribs around the diff, and test fit till it spins freely with the top case bolted on. then it will look like this:
open diff next to ITR LSD
Clean the fuck out of the inside casing and install LSD
install gears
and selectors etc etc etc
put the top case on and your done.
ill need the LSD to get grip on these brand new china china tyres
damnit i forgot the pics, the motors sitting in the car. might have the head back from the shop tomorrow then ill be able to drive it again!!!
Dude thats pretty badass. Not many people get tomwork with an itr shell! Lucky you!
looking good man
200+ ALL MOTOR LS VTEC
mmmmmmmmmmmmmmmmmmm those are some clean fat fives! I'm really liking the progress on this build
yeah the wheels are minter than my 150 dollar set. these costed me 50.
i got the b16a head back from the shop so im gunna assemble the engine tonight!!!!!!!
Last night i assembled the B20Vtec motor. heres some pics
block in car waiting:
head, with new dowel pin holes on the other side
new dowel pin and a plug screwed into the oil vtec oil supply port
Oil line to the head
head gasket on
head installed and torqued down to spec
install cams and the rest of the bullshit
the engine started quick and idled MINT! only problem is someone chopped off the VSS sensor plug on my engine loom so the speedo doesnt work and the vtacks doesnt work either
ill fix that tonight!
Nice HUILE/710 cap (Y)
Nice!!!!.....What, no VTAKKK!?!?!?!
Dise your making me look bad, that car is coming together with a quickness!
fixed the vtec tonight. solenoid filter was blocked up as well as the VSS plug cut off. I soldered it back on. Im still running the ITR tune on my OBD1 ecu so the motor doesnt run the best, Off-VTEC its fine, good torque/mid range but as soon as it come on vtec at 5800rpm it falls on its face for a bit until around 6800rpm it starts taking off and pulls all the way to 8k (at least)
i wont take it over 8k
Last edited by AccordB20A; 01-25-2012 at 02:58 AM.
I located a crome tune on the interwebs and chucked it on my ecu and customised a few things, rev limiter 8200rpm, VTEC at 4800RPM etc etc
It now runs FuCKING PRIMO. heres a vid, cant see much but u get the picture
http://www.youtube.com/watch?v=PJU1Q...ature=youtu.be
Vids!!
Vtech!!
Looks like it pulls pretty hard!
dock vtacks
Mivec!!
yourvec
next step, dyno tune
Posting Permissions
Reply With Quote
Bookmarks