Page 1 of 5 12345 LastLast
Results 1 to 25 of 120

Thread: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

  1. #1
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Hi all,

    After owning my CA5 2.0i 16v for almost 5 years now i decided to start into the restoration of the car. The reason why it taken me to now is that I only got a garage set up at the house last year and in the past year I was taking my EK4 civic to track days , so that was consuming a lot of the budget.

    I will not be modifying any part of the car, I will use genuine Honda parts where available, and at a right price. If a part is needed I will try to source a second hand item on eBay and clean that up before I buy a new part. Ideally I will have the car in the condition it left the factory.

    Unfortunately progress will be slow on this as I have limited time and budget to devote to this.. I will never see myself selling the car so I am in no rush to complete it. I just hope I have it done in time for my retirement. 

    So here is a few pictures of what it looked like at the end of last year.









  2. #2
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Job 1 - I thought I would repaint the cam cover a Matt black .



    that tidied things up a bit.

  3. #3
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I got the spare parts bit parked up outside. Basically I stripped everything and anything i could of that car so that i knew how to take apart my good one. I found out that even though the cars look similar there was a "facelift" from 87 to 88 year models and there is a lot of differences in the engine and gearbox.


  4. #4
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    oh man that looks so mint!


    1989 Honda Accord LX-I 300K+
    Build Thread

  5. #5

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,638

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Yes! Factory restoration FTW!!!
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  6. #6

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Wery nice car, tidy and no rust. good base to begin with.
    This is what I plan with my car as well. Alltho I dont mind extra power and better handling, so imo the internals could be made go faster.
    Last edited by Tomisimo; 02-08-2012 at 07:49 PM.

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  7. #7
    LXi User hondalude86's Avatar
    Join Date
    Dec 2003
    Vehicle
    1986/Honda/prelude si
    Location
    Denver Colorado
    Posts
    731

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I really do love these front ends... I'd almost like to have one for my accord so that i didn't hear the confusion between the coupe and the Lude.

  8. #8
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Quote Originally Posted by hondalude86 View Post
    I really do love these front ends... I'd almost like to have one for my accord so that i didn't hear the confusion between the coupe and the Lude.
    But then people would be like, nice Civic!

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  9. #9

    87roach's Avatar
    Join Date
    Mar 2007
    Vehicle
    87 Hatch
    Location
    Summerland, B.C.
    Posts
    1,629

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I really wouldn't say this is a restoration.. at all.

    Great looking car though!
    Andrew.

    My hatch build thread(started in winter of 07).

  10. #10
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Cheers for the comments guys.. in fact there is alot of rust on the rear arches. I took the bumper off and started cleaning up the drivers side arch. With the amount of rust I though the whole car was infected. Ill upload pics from my camera to show the cancer at work.. it doesn't look pretty from here on.
    Last edited by stezie; 02-09-2012 at 01:38 AM.

  11. #11
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I just picked the stone chip protection off with my hands.. i haven't put any grinders to the rust yet...











  12. #12
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Some more picking.. its just falling off in my hands.











  13. #13
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I pointed the camera up under the rear wheel arch to show the extent of the rust peaking through.. ill need to completely re build these inner arches.










  14. #14
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Passenger side wheel arch isn't as bad , but will still need attention. under the rear bumper looks rust free, thankfully. just a small bit of attention under the rear left taillight. the last picture in this series shows the size of the hole i picked with my hand.. this looked like a solid inner arch before hand. it appears that the stone chip protection done its job over the years, although the metal in behind was rusting away..










  15. #15
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I have two new rear arches to order tomorrow. I just need to find someone willing to change them for me.

    this is the first job on the car, and the rust i have found so far is making me dread what i can find later on...
    Last edited by stezie; 11-05-2012 at 10:24 AM.

  16. #16
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    These cars are getting really difficult to find in Ireland now for parts, and when I spotted an accord in the rear of a lorry at a local metal recycling yard last year I asked him if I could take a few things off the car before he crushes the car..

    He said that I can take what ever I want off the car and only asked for 50 euro, which was a bargain.

    Although it was a 12v engine with an auto gear box, the suspension is the same so I took all that, along with abs sensors, alternator, and full set of locks, and a working electric aerial, that wasn't broken!!

    What annoyed me is that when the guy went to look at the car, he said there wasn't a mark on the car before he picked it up by the grab and threw it in the back of the lorry.. I could of helped myself to lights and panels.





    I hope to have the spare suspension cleaned, painted and fitted with new bearing, and bushings where possible to drop into the car.

  17. #17

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Holy, from the outside it didnt look as bas as close ut, check out under the gas tank also and radiator support, these are usual places they use to rust where you font see before its to late. The most efficient way to get rid of bublerust is to use rotary brush on the anglegrinder.

    just mark the rotation direction and always use it in the same direction or those steel hears will fly out og sitting.

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  18. #18
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Quote Originally Posted by Tomisimo View Post
    Holy, from the outside it didnt look as bas as close ut, check out under the gas tank also and radiator support, these are usual places they use to rust where you font see before its to late. The most efficient way to get rid of bublerust is to use rotary brush on the anglegrinder.

    just mark the rotation direction and always use it in the same direction or those steel hears will fly out og sitting.
    Yeah if you stood close to the car the arches did not look healthy.


    My plan of action is to remove the complete rear suspension and sub frame, including petrol tank. I will then remove all stone chip protection from underneath and identify any rust spots then I will re coat the under neath of the car in black POR 15, then spray red again.

  19. #19

    87roach's Avatar
    Join Date
    Mar 2007
    Vehicle
    87 Hatch
    Location
    Summerland, B.C.
    Posts
    1,629

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I think I spoke too soon!

    It's not a project without rust repair haha
    Andrew.

    My hatch build thread(started in winter of 07).

  20. #20

    Vanilla Sky's Avatar
    Join Date
    Apr 2002
    Vehicle
    1999 Penalty Box
    Location
    Palatka, Florida, United States
    Posts
    8,932

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Do you have an air compressor? With a restoration and rust repair like this, you'll absolutely hate not having one.

  21. #21
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    I don't like rust but I do like the stack of parts you have!


    1989 Honda Accord LX-I 300K+
    Build Thread

  22. #22
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    air compressor?? naaaa i doesnt have one.. should i have one? ha.. na im just a novice mechanic.. all the welding and body work will be completed by a pro for me.

    unless for using air tools like an impact gun?



    Yeah spare parts are handy, i grab as much as i can where possible.. not many accords about now.
    Last edited by stezie; 11-05-2012 at 10:25 AM.

  23. #23

    Vanilla Sky's Avatar
    Join Date
    Apr 2002
    Vehicle
    1999 Penalty Box
    Location
    Palatka, Florida, United States
    Posts
    8,932

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Air tools are awesome to have, especially to run big impact guns and sand blasters. As a matter of fact, you would probably REALLY like a soda blaster. It uses baking soda as the abrasive media, and it leaves a protective coating on the metal. You can save a lot of money by taking care of the minor rust yourself. Same with the suspension parts. A few cans of Chassis Black or similar epoxy paint would make your suspension look brand new.

    I have to commend you greatly for restoring one of these cars. Most people, myself included, only want to make them go fast. Thanks for keeping one in nice original condition.

  24. #24

    Tomisimo's Avatar
    Join Date
    Sep 2006
    Vehicle
    Honda Accord's EXi #1 [A20a4] R.I.P & #2 [B20a2]
    Location
    Norway/Europe
    Posts
    1,794

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    Air tool are must on a 20++yr old car. I had to cut damper fork, because the bolt was rusted shut inside LCA, you have some neat impact hammer tools for cars that wil shake anything out, but the bolt willlook like a mushroom tho. plus you can use it with point sand blaster to prepare your car in order to save some cash for a full body repaint. do as much as you can, learn the car.

    Its prttey fnuny how you can raed tihs eintre snetnece with all tehse ellters out of palce...

    My Build Thread

  25. #25
    LX User stezie's Avatar
    Join Date
    Mar 2009
    Vehicle
    1988 Accord 2.0i 16V (B20A2)
    Location
    Co. Donegal, Ireland
    Posts
    190

    Re: Stezie's - 1988 Accord 2.0i 16v - OEM Restoration

    air compressor is on the shopping list then so.. What size of compressor would you guys recommend? bear in mind I would like to keep as much floor space as possible in my garage and dont want to spend a fortune on a set up that will only have occassional weekend use.

Similar Threads

  1. SZfiftyfour's 2G Accord Restoration
    By SZfiftyfour in forum Project Central
    Replies: 135
    Last Post: 02-12-2017, 10:13 AM
  2. Heat gun restoration
    By nswst8 in forum Interior & Exterior Care
    Replies: 6
    Last Post: 12-27-2009, 09:35 PM
  3. 1977 Accord Restoration
    By carver in forum 1geez Accords
    Replies: 68
    Last Post: 01-31-2009, 06:31 AM
  4. Seeking Seat Cover Fabric--Mauve Red--For 1986 Accord LXi Restoration
    By Raphael in forum Interior & Exterior Care
    Replies: 7
    Last Post: 04-25-2007, 01:07 PM
  5. Suspension Restoration
    By 86-accord-lxi in forum Suspension/Wheels/Tires/Brakes
    Replies: 10
    Last Post: 02-28-2006, 01:11 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink