i have a 86 accord dx. with a a20a2 stock engine. i have a b16 that i would like to put in it. i would like to do it cheaper then 300 dollars. need your help to start and finish this project thanks
i have a 86 accord dx. with a a20a2 stock engine. i have a b16 that i would like to put in it. i would like to do it cheaper then 300 dollars. need your help to start and finish this project thanks
Sorry to be the bearer of bad news but the b series mounts cost 350 so its already out of budget. Plus youll need axles, linkages, hydro conversion unless your going to use a cable b series tranny.
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
thanks man for help. i have tranny too. could i make my own mounts
You could but you need to have good fab. skills. I would just buy the mount cause thats one less thing to worry about,
Id just save up for the mounts dude and go from there
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
300? Go to HF, buy a cheap welder, grinder, and some metal. Do work.
Bookmarks