Page 1 of 3 123 LastLast
Results 1 to 25 of 61

Thread: Performance parts list . 86-89 accord

  1. #1
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Exclamation Performance parts list . 86-89 accord

    I feel the need to make this thread for all the new members out there. I will TRY to list all of the performance part available for the 86-89 accord with the A-series motor, unless specified . I will not list the pros. or cons. of each item or power gain, just companies/members and products, and will be your responsibility to SEARCH!!!. "Other" section will be for parts that will fit with some modifications but again it will be your responsibility to SEARCH!!!. If you do not see the parts that you are looking for, it means that they will have to be custom made.

    IMPORTANT KEY: (*) For FI models, (**) For carb. models, (+) Both models


    Air Induction
    Short ram intake: Weapon R. * NOTE: I would recommend the DIY in the wiki over the Weapon R.
    Air Filters: K&N filters. + AEM, Injen, HKS, ect... have universal type filters that fit short ram intakes or CAI.
    Throttle body: Gude Performance.* NOTE: I would recommend a B series manifold first. see "other" section below.
    Intake flange: Discontinued: Weir Tech. +
    Intake manifold: Gude Performance. + NOTE: I would recommend an aftermarket B series manifold. See "other" section below.
    Individual throttle bodies (ITB's) kit: Extrudabody.+
    ITB manifold (EFI and twin DCOE40's): Extrudabody for EFI and twin DCOE40's. +
    Heat shielding gasket: Bisimoto. +

    -Other
    Cold air intake (CAI): Modified from another car or custom made. Perfect "how to" in 3geez wiki. *
    Intake manifold: Another option would be to use a B16/B18 OEM or performance manifold, will fit with a bit of work.*
    Intake manifold for B20A: Same as the A20.*
    Throttle body: Many for B-series manifold. *
    ITB's: Same as the intake manifolds. *


    EXHAUST
    Headers: Pacesetters and OBX. Discontinued: DC sports and S&S. +
    Exhaust flange: Discontinued: Weir Tech, BMC. +
    Catalytic converter: Magnaflow 49 state and California, Random Technology. +
    Cat back exhaust: Monza. + NOTE:An alternative would be going to a muffler shop with your own muffler and resonator.

    -Other
    Headers for JDM B20A: H22 headers and supposedly 90-94 eclipse DOHC non-turbo fit with a couple of mods. +


    ENGINE
    Camshaft regrind: Delta, Colt cams, Crower, Bisimoto, Gude Performance, Crane Cams. +
    Valve springs: Bisimoto. +
    Adjustable cam gear: Bisimoto. Discontinued: Golden Eagle. +
    Head studs: ARP from 98-00 Mazda Miata (Part# 218-4703)
    Main bearings: Toga, King engine bearings
    Con. rod bearings: ACL Race Series. +
    Weber kit: Redline (Weber 32/36, 38/38, or twin DCOE40's). **
    Adjustable fuel pressure regulator (AFPR): AEM, Aeromotive, Blox. *
    Fuel pump: Walbro, Venom. *
    Poly mount brackets: Cygnus X-1 (3geez member). +
    Copper Headgasket Cometic gaskets +

    -Other
    Fuel rail: None for stock manifold but plenty for B series manifold. *
    Connecting rods: Aftermarket LS rods fit with some mods. +
    Pistons: I believe 83mm B series pistons work but check first.+
    Pistons for JDM B20A: B16 pistons fit with mods. *


    ELECTRICAL
    OBD1 Harness: CJS Wiring. *
    OBD1 dist. adapt. plate: Cygnus X-1 (3geez member). *
    OBD1 Jumper harness: Boomslang Fabrications. Discontinued: lx-incredible's jumper harness (3geez member). *
    Spark plug wires: NGK, Magnecor, Nology. +

    -Other
    OBD1 Jumper harness: Any OBD0-OBD1 jumper harness will work with mods. *


    DRIVETRAIN
    Aluminum flywheel: Clutch Net, Aasco. +
    Clutch kit: ACT, Spec, Clutch Net, Clutch Masters, Centerforce, Unorthodox Racing. +
    Short throw shifter: Chedda_Jsauto's Adjustable short shifter and other cool stuff (3geez member). Discontinued: Pacesetters. +
    Shifter stabilizer bushing kit: Energy suspensions (16.1101R). +

    -Other
    Limited slip differential (LSD): Wavetrac or any other B16 LSD with some mods. 5-speed only. +


    TURBO
    Turbo manifold: Mosselman (might be discontinued). *

    -Other
    Turbo kit: Build your own from scratch.


    ENGINE SWAP
    Motor mounts for B-swap: Innovative Mounts. Discontinued: PlaceRacing Inc. +

    NOTE ON BISIMOTO: Some of the parts listed above may not appear on their website but if you contact them, they should have it.

    If you see that I have made a mistake somewhere or that I'm completely off about a part, please PM so I can correct it. Also, if you know of more parts that are not listed, PM so I can add them to the list.

    Update: 8/9/15
    Last edited by obdriver6; 08-09-2015 at 04:51 PM.


    1989 Honda Accord LX-I 300K+
    Build Thread



  2. #2
    3Geez Veteran ghettogeddy's Avatar
    Join Date
    Jan 2006
    Vehicle
    88 lx sedan (R.I.P.) / 89 LX sedan(sold) / 89 lxi parts car(towed away) / 87 lxi hatch
    Location
    Antioch CA
    Posts
    9,591

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    maybe add links to parts websites

  3. #3
    2.0Si User ShyBoyCA6's Avatar
    Join Date
    Oct 2009
    Vehicle
    89 Honda Accord Coupe
    Location
    Pacoima, California, United States
    Posts
    3,034

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Nice add. let hope they use the the search for this lol

  4. #4
    SEi User import racer's Avatar
    Join Date
    Aug 2006
    Vehicle
    87 lx sedan[ R.I.P ] and 89 sei
    Location
    bridgewater.NS Canada
    Posts
    1,418

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    So has anyone verified the 90-94 eclipsed headers.

  5. #5

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Quote Originally Posted by import racer View Post
    So has anyone verified the 90-94 eclipsed headers.
    Those were on the B20A

  6. #6

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,638

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Great write up. Should be a stickied.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  7. #7

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Pm a mod after everything is done and edited.

    Good info.
    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

  8. #8
    SEi User import racer's Avatar
    Join Date
    Aug 2006
    Vehicle
    87 lx sedan[ R.I.P ] and 89 sei
    Location
    bridgewater.NS Canada
    Posts
    1,418

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    So how much work to make h22 ones fit a20.Or would the obx ones be better.

  9. #9

    Vanilla Sky's Avatar
    Join Date
    Apr 2002
    Vehicle
    1999 Penalty Box
    Location
    Palatka, Florida, United States
    Posts
    8,932

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    The Eclipse header won't fit an A series motor. The center exhaust ports are offest on the A series, and the Eclipse header and H22 headers have evenly spaced ports like the B20A.

    I'm watching this thread. If you don't mind, I'd like to clean it up and post it in the FAQ once we have gone through and verified that everyone is covered.

  10. #10
    DX User
    Join Date
    Jan 2012
    Posts
    46

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    What about headers from a 4th or 5th gen accord? I found a set of 4-2-1 Dc headers that the guy says will fit on a 1994-1997 accord. will they fit on my A20A1?

  11. #11
    2.0Si User ShyBoyCA6's Avatar
    Join Date
    Oct 2009
    Vehicle
    89 Honda Accord Coupe
    Location
    Pacoima, California, United States
    Posts
    3,034

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Quote Originally Posted by honda crew View Post
    What about headers from a 4th or 5th gen accord? I found a set of 4-2-1 Dc headers that the guy says will fit on a 1994-1997 accord. will they fit on my A20A1?
    Read what he listed, if it's not there then it will need modifying....

  12. #12

    Vanilla Sky's Avatar
    Join Date
    Apr 2002
    Vehicle
    1999 Penalty Box
    Location
    Palatka, Florida, United States
    Posts
    8,932

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    No. You're getting away from offset exhaust ports again.

    If it isn't meant to fit on an BT, BS, or A series engine, it's not going to work without changing the flange and moving the tubing to match the exhaust port. By the time you've put that much work into a manifold, you're not far from having a ground-up custom manifold.

    While it is just metal, you do have to be able to cut, fit, and weld any manifold modification.

  13. #13
    3Geez Veteran gfrg88's Avatar
    Join Date
    Jan 2005
    Vehicle
    1986 Honda Prelude 2.0Si-T
    Location
    A Mile High.
    Posts
    4,790

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    4th gen accord test pipe fits. Don't know if that's been thrown in yet..
    -Gio
    .
    .
    My E85 Turbo Build
    .
    .
    5280FEST
    .
    .

  14. #14
    LXi User 88lxi-shortram's Avatar
    Join Date
    Mar 2010
    Vehicle
    88 lxi
    Location
    lawrenceville, GA
    Posts
    941

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Quote Originally Posted by gfrg88 View Post
    4th gen accord test pipe fits. Don't know if that's been thrown in yet..
    correction to that. to make a 4th gen test pipe fit you must cut the exhuat pipe behind the cat and reweld it. the flanges are the same but they are positioned different
    88 lxi:
    shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD

  15. #15
    SEi User
    Join Date
    Jan 2004
    Posts
    1,396

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    You also missed out the best clutch manufacturer Clutch net they also do ally flywheels too.

  16. #16
    3Geez Veteran
    Join Date
    Oct 2007
    Vehicle
    88coupe
    Location
    Marietta, Ga
    Posts
    4,084

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    I like this.

    Btw as far as the obd1 jumper harness goes, any obd0 to obd1 mpfi harness will work.

    Ill see if i have anything to add later.

    Quote Originally Posted by CAH View Post
    pullin up turbo spoolin fast lookin fly like a 3g like a 3g like a 3g

  17. #17
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Quote Originally Posted by ghettogeddy View Post
    maybe add links to parts websites
    I thought about that but it really isn't that hard for people to google most of this stuff.
    Quote Originally Posted by import racer View Post
    So how much work to make h22 ones fit a20.Or would the obx ones be better.
    H22 and eclipse headers are only for the JDM B20A.
    Quote Originally Posted by 88lxi-shortram View Post
    correction to that. to make a 4th gen test pipe fit you must cut the exhuat pipe behind the cat and reweld it. the flanges are the same but they are positioned different
    I'll look into that or can anyone else confirm that?
    Quote Originally Posted by rjudgey View Post
    You also missed out the best clutch manufacturer Clutch net they also do ally flywheels too.
    Thanks, I knew I forgot one!
    Quote Originally Posted by Tdurr View Post
    I like this.

    Btw as far as the obd1 jumper harness goes, any obd0 to obd1 mpfi harness will work.

    Ill see if i have anything to add later.
    Yeah, I learned that after I made the list.


    Thanks for all the positive replies and keep them coming, I'll try and see if I can find more part to add to the list!
    Last edited by obdriver6; 02-24-2012 at 11:45 AM.


    1989 Honda Accord LX-I 300K+
    Build Thread

  18. #18
    LXi User 88lxi-shortram's Avatar
    Join Date
    Mar 2010
    Vehicle
    88 lxi
    Location
    lawrenceville, GA
    Posts
    941

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    ill post pics.... i think i had to rotate the rear flange about 3 inches to get it to line up
    88 lxi:
    shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD

  19. #19
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    ^^ please do.


    1989 Honda Accord LX-I 300K+
    Build Thread

  20. #20
    3Geez Veteran gfrg88's Avatar
    Join Date
    Jan 2005
    Vehicle
    1986 Honda Prelude 2.0Si-T
    Location
    A Mile High.
    Posts
    4,790

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Quote Originally Posted by 88lxi-shortram View Post
    correction to that. to make a 4th gen test pipe fit you must cut the exhuat pipe behind the cat and reweld it. the flanges are the same but they are positioned different
    I don't remember cutting anything, or welding anything. But it's also been almost 8 years since I did it...
    -Gio
    .
    .
    My E85 Turbo Build
    .
    .
    5280FEST
    .
    .

  21. #21
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    ^^ yeah, it looks like they are offset by about 90 degrees.


    1989 Honda Accord LX-I 300K+
    Build Thread

  22. #22

    89T's Avatar
    Join Date
    Apr 2004
    Posts
    3,020

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    un-motivated!
    someone make me an offer i just could not say no to.

    3GR

  23. #23
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    ^^ shifter bushing kit?

    EDIT: never mind I found it. Thanks
    Last edited by obdriver6; 03-03-2012 at 02:07 PM.


    1989 Honda Accord LX-I 300K+
    Build Thread

  24. #24
    3Geez Veteran gfrg88's Avatar
    Join Date
    Jan 2005
    Vehicle
    1986 Honda Prelude 2.0Si-T
    Location
    A Mile High.
    Posts
    4,790

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    Quote Originally Posted by obdriver6 View Post
    ^^ yeah, it looks like they are offset by about 90 degrees.
    Well shit. Maybe it was a different car??? Can't remember.. BUT I do know for a fact that I used a cheap test pipe that bolted up with no problems
    -Gio
    .
    .
    My E85 Turbo Build
    .
    .
    5280FEST
    .
    .

  25. #25
    SEi User obdriver6's Avatar
    Join Date
    Nov 2008
    Vehicle
    1989 Accord LX-I Coupe
    Location
    Las Vegas, NV
    Posts
    1,396

    Re: POSSIBLY ALL THE PERFORMANCE PARTS FOR THE 86-89 ACCORD :o

    ^^ Maybe somebody made test pipe for our cars back then.
    For the info, I went to magnaflow. You can see that the 1st flange looks the same but its off by 90 degrees.
    86-89 accord
    http://www.magnaflow.com/02catalytic...irectfit=22623
    90-93 accord
    http://www.magnaflow.com/02catalytic...irectfit=22624


    1989 Honda Accord LX-I 300K+
    Build Thread

Similar Threads

  1. can someone post a performANCE LIST
    By b20a86lude in forum JDM B18A / B20A Swap Tech
    Replies: 21
    Last Post: 01-23-2009, 06:40 PM
  2. b20a complete performance list
    By b20a86lude in forum JDM B18A / B20A Swap Tech
    Replies: 5
    Last Post: 12-08-2008, 09:38 AM
  3. NOS parts list
    By oldpanelsuk in forum 1geez Accords
    Replies: 0
    Last Post: 03-17-2008, 12:00 PM
  4. performance parts for a 89 accord dx carb A20A1 5Speed
    By josephgilpin in forum Performance
    Replies: 15
    Last Post: 11-16-2006, 09:34 AM
  5. List of performance parts!
    By macius in forum Performance
    Replies: 0
    Last Post: 10-28-2003, 05:38 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink