Got a Hold of a F22a.

[wilsonhill12]

So im doing a engine swap in a 4g accord because the owner apparently was not very frequent with her oil changes and threw a rod.

So basically im getting everything from the f22a except for the block, What im asking is what can i take off the engine and swap into my 3g a20a3 accord, i know TB is a good upgrade, maybe cams? i also know that the exhaust manifold wont fit without modification which leads me to believe the intake will be the same,

Thank you in advanced.

[gfrg88]

nothing.

[wilsonhill12]

nothing.

Absolutely nothing?

[gfrg88]

The whole engine? If you swap it in.. Other than that, I don't know of anything at all from F-series that works with A-series.

[gfrg88]

I'm wrong. You can use some parts..

https://www.3geez.com/forum/showthread.php?t=63

[wilsonhill12]

Thank you, would you happen to know what size injectors come stock in our a20's?

[ShyBoyCA6]

Thank you, would you happen to know what size injectors come stock in our a20's?

they would swap over to the A20

[wilsonhill12]

they would swap over to the A20

i mean flow rate, in CC's

i know f22 injectors are 240 cc

[ShyBoyCA6]

i mean flow rate, in CC's

i know f22 injectors are 240 cc

Oh then in that case search, its been discussed already and sure it will pop out. everything you ask has been asked before.

[wilsonhill12]

Oh then in that case search, its been discussed already and sure it will pop out. everything you ask has been asked before.

Trust me ive been searching for everything ive asked before i post.. all i find is turbo injector sizing, and im clearly not running a turbo

[gfrg88]

Same flow rates I believe.

[wilsonhill12]

Yes, i found a list of injector sizing

http://www.accordinglydone.com/data/injectors.php

[MessyHonda]

you can use lots of stuff from the engine. like OBD1 distributor for the swap, TB, injectors. alternator with mod they pump out like 90 amps and ours are 65. other than that nothing much really

[2drSE-i]

Unfortunately, not much. Throttle body is plug and play, injectors will be the same, alternator is a decent upgrade, takes some tweaking. I believe theres a thread about that in the How-To section.

[wilsonhill12]

Unfortunately, not much. Throttle body is plug and play, injectors will be the same, alternator is a decent upgrade, takes some tweaking. I believe theres a thread about that in the How-To section.

Thank you guys for the help, got the tb and injectors off it just gonna grab the alternator then i'll be done, my cars just a daily driver so not really into ecu swaps and such.

[AccordEpicenter]

none of that shit is bolt on except for the injectors, and the flow rate is the same. Pass

[import racer]

So did anyone figure out the problem with the 4th gen tb on the 3rd gen.