Egr tube, so dumb. Its in the way of the one 12mm to change out that D gasket on the thermostat housing....
so much rage.
Egr tube, so dumb. Its in the way of the one 12mm to change out that D gasket on the thermostat housing....
so much rage.
Originally Posted by CAH
lol yeah its a pain.
Pshh next time i touch it im cutting that fucker off.
haha use it as a Cover for the egr...i still have mine but the header doesn't have the screw for the egr pipe haha.
Yeah, it's a fun one. You'll get it if you swear enough. LOL
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
I just disconnected it from the intake manifold, bent it a little, and use a small ratchet, socket and extension to remove the lower nut.
EDIT: I believe the small ratchet set is 1/4". I should look up the photos I took...
I have to drill that bastard nut though; it was way too tight and I feared breaking the threaded rod (that would have been a bummer)
Worked well, and the last coolant leak is gone
Last edited by ecogabriel; 04-09-2012 at 06:49 PM.
If it ain't broke... I fix it!
Posting Permissions
Reply With Quote
Bookmarks