Hi everyone.Its been a lot since my last tread. If you remember it, i posted some pictures of my Accord being fixed.
Now im gona leave only two pictures so you can see how it is almost finished.
Hope you like it.
first
Now
![]()
Hi everyone.Its been a lot since my last tread. If you remember it, i posted some pictures of my Accord being fixed.
Now im gona leave only two pictures so you can see how it is almost finished.
Hope you like it.
first
Now
![]()
real nice! looks like a lot of work went into that car, and a very good end result too. interested in seeing moar pics
That's quite the transformation, really clean looking car.
My Project thread https://www.3geez.com/forum/project-c...dan-build.html
My Flickr: http://www.flickr.com/photos/jdmca5/
Looking good (Y) Nice work! I really like that color a lot![]()
OMG. That's real love there. Wow. Just amazing.
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
Unbelievable! Great! Lots of sweat!
Great to see your dedication to your Accord, the work that has been required and the progress achieved.
A reminder to properly investigate & repair the windscreen corner rust upon my '77!
WOW! Turned out really good!
Excellent! Can I ask a bit of advice? Got any tricks/techniques for getting the front fenders off? I attempted to remove mine, undid all the bolts, and it was still stuck on with some sort of adhesive/sealant. I would just pry it up but the metal seems too thin to monkey with it.
A really good transformation!
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
If you're talking about the seam sealer thing they used between the fender and the frame then simply pry them off with a knife or something. Are you sure you've got all the bolts off haha I know I missed the two bolts up front just under the headlamps/behind the grille and going dfsdsdfs wtf??
Or tap a thin, disposeable paint scraper into the gap.
Thanks guys... I'll have to give that a try.I might just buy a bunch of dollar store scrapers... Oh and I DID also miss those bolts!
![]()
Bookmarks