Hi everyone.Its been a lot since my last tread. If you remember it, i posted some pictures of my Accord being fixed.
Now im gona leave only two pictures so you can see how it is almost finished.
Hope you like it.
first
Now
Hi everyone.Its been a lot since my last tread. If you remember it, i posted some pictures of my Accord being fixed.
Now im gona leave only two pictures so you can see how it is almost finished.
Hope you like it.
first
Now
real nice! looks like a lot of work went into that car, and a very good end result too. interested in seeing moar pics
That's quite the transformation, really clean looking car.
My Project thread https://www.3geez.com/forum/project-c...dan-build.html
My Flickr: http://www.flickr.com/photos/jdmca5/
Looking good (Y) Nice work! I really like that color a lot
OMG. That's real love there. Wow. Just amazing.
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
Unbelievable! Great! Lots of sweat!
Great to see your dedication to your Accord, the work that has been required and the progress achieved.
A reminder to properly investigate & repair the windscreen corner rust upon my '77!
WOW! Turned out really good!
Excellent! Can I ask a bit of advice? Got any tricks/techniques for getting the front fenders off? I attempted to remove mine, undid all the bolts, and it was still stuck on with some sort of adhesive/sealant. I would just pry it up but the metal seems too thin to monkey with it.
A really good transformation!
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
If you're talking about the seam sealer thing they used between the fender and the frame then simply pry them off with a knife or something. Are you sure you've got all the bolts off haha I know I missed the two bolts up front just under the headlamps/behind the grille and going dfsdsdfs wtf??
Or tap a thin, disposeable paint scraper into the gap.
Thanks guys... I'll have to give that a try.I might just buy a bunch of dollar store scrapers... Oh and I DID also miss those bolts!
Bookmarks