I thought instead of hijacking Hazwan's 4x100 conversion thread, that I'd start new discussion here.
I'm thinking that what I'm going to do now, is get the 82 Accord "Hub Repair Kit" that I found on Rock Auto. It uses the same wheel bearing, same spline count, same seals and everything as the 1st gen. The only difference is the hub. And it has wheel studs! And it's $45/side with the hubs, bearings and all the seals.
I took my 84 Accord stock axles to see just for shits and giggles in my 81 Hubs. Well the splines on the 81 go all the way back to the end of the stub, and the 84 splines only go about 3/4 of the way back. So the 84 Axles won't fit into the 81 hub, but it should work the other way around. So no matter which way the 82 hubs are configured, I believe that the 81 Axles should fit in, since they are fully splined.