Ok so i went waayyyyyy lower and now im satisfiedwith my stance . but ive run into a problem, my trany and oil pan are to close to the ground for comfort. i wanted to know if anyone has raised an engine up for more clearance. i have ideas but would value some thoughts.
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
Just make a skid plate.
I would, but the only problem i see with that is that even though the skid plate will absorb most of the impact it might still damage something. idk if u have me on fb but i posted pics last night of how close i am. im thinking if a raise the motor up a little and make a skid plate i would be much more protected.
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
or maybe custom oil pan?
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Lol i dont even know where to begin looking for a shop thatll do that.
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
And that still wont helo my tranny out either
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
Skid plates. Seriously, it's your only reasonable option. Build one you'd be comfortable with on a rock crawler. It's what the mini truck guys do. It's the only reason some of them still have oil pans. When you're cruising low enough to pop reflectors off the ground, a manhole cover that sticks up 2-3 inches will take just about anything out.
Where are the pics? On Failbook? Lame.
Their not on the 3geez facebook page.Originally Posted by 2ndGenGuy
@88LXI post pics either here or on the facebook group so we can see.
ill be sure to post them up when i get home. theyre on my computer and im at work.
88 lxi:
shortram, msd blaster 2 coil, lowered 2.5" in the rear 3" in the front, stripped because race car XD
It is easy to shim the front and rear mount, however the side mount would be difficult to modify because of it's shape and the way it mounts
Eric
3geez member since October 12, 2000
"All this worldly wisdom was once the unamiable heresy of some wise man." - Henry David Thoreau
They make 1/4 plate aluminum skid plates for Fwd impala cop cars, may find one in the jy off a 2005 ishahh so doubled up street signs would be similar plate hmmm
Gwinnet county had a shitpile of those impalas so you may get lucky and find one around there shortram
Last edited by 2oodoor; 09-27-2012 at 02:10 PM.
My suggestion is to raise the car if you're concerned, but I always favor function over appearance.
Mike
k sport also offers a air ride suspension but its 2790...but that would look cool and still serve as a function
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
There are other companies that make them for Civics and newer Accords. Since we're talking about air over strut, you really don't need to be concerned with lenght, as long as they are short enough to lay frame. You might need to tuck your exhaust and add a fuel tank skid plate, too.
I so wanted air suspension but too much $$$$$ so theres got to be some good used ones out there somewhere !!! I agree, a lot of air struts from other apps could be made to work for ours.
The pinch fork added length may limit that to mostly Hondas though.
Last edited by 2oodoor; 09-28-2012 at 08:54 AM. Reason: D
As long as it fits properly, it doesn't matter. IIRC, the combo is EF Civic in the front, CB Accord in the rear. Look in Lowrider and Mini Truckin' for companies that make air struts. Slam Specialties come to mind, but I recall issues with some of their bags back in the day.
Pics?
^ x2
Wheres the damn like button, this is 2012!!
Posted twice...look below. V
Last edited by mushroom_toy; 11-13-2012 at 04:14 PM.
1986 Honda Accord Lx-i
~~NGK~~Silvania~~MSD~~Pioneer~~MSW~~Bosch~~DC Sports~~115WHP 116WTQ
Mine may be lower......and yes my engine is raised about 2".
Things youll run into....sway bar completely binds shift linkage up...and youll need to notch the body for the axles.
Edit: also youll need to raise the rear of the hood...cut out some of the under hood support...stiffen the mounts so your motors not torquing into the hood...etc.
1986 Honda Accord Lx-i
~~NGK~~Silvania~~MSD~~Pioneer~~MSW~~Bosch~~DC Sports~~115WHP 116WTQ
lmao....the next day there is a like button. Thanks Joe!
It's what the small vehicle people do. It's the only purpose some of them still have oil dishes. When you're visiting low enough to pop reflectors off the floor, a manhole protect that stays up 2-3 inches wide will take just about anything out.
Buzz App | Buzz Apps | Twilio Services | SMS Marketing | Wordpress SMS Plugin | SMS Plugin | WP SMS Plugin | Privacy Pro | Wifi Based App | Privacy Pro App
Last edited by DaveE; 10-07-2016 at 05:41 AM.
Posting Permissions
Reply With Quote
Bookmarks