Alright I got the head gasket done and got the car started today. It was rough at first but once I let it work it began to idle. Problem is that as it gets warmer it doesn't come down. I let it warm up a bit and once the temp gauge got into the white section the RPM started going up. I turned it off, let it sit then started it again and while it started right up it did the same thing. I have no idea as to why this is doing this.
One thing that's really weird is that the hammer on the throttle does not touch the idle screw at all. Even after letting it warm up it does not move. I'm thinking my choke is off but that's a wild guess at this point.