Page 1 of 3 123 LastLast
Results 1 to 25 of 63

Thread: Intake Manifolds That Fit A20A and JDM B20A Motors

  1. #1
    LXi User
    Join Date
    May 2002
    Vehicle
    89 LXI
    Location
    Maryland
    Posts
    603

    Exclamation Intake Manifolds That Fit A20A and JDM B20A Motors

    Here are some completed intake manifold swaps:

    B16A Manifold on JDM B20A

    B18A Manifold on A20A
    .
    .
    .
    .
    Quote Originally Posted by joker2
    I think this would be good for the people who are thinking of going with a different manifold.... Like I know a b16 manifold will fit but you have to tap the head with 2 extra bolts, which isn't hard at all....
    Last edited by A20A1; 10-06-2004 at 02:02 AM.



  2. #2
    SEi User
    Join Date
    Jun 2001
    Vehicle
    88 lxi coupe
    Location
    gainesville, fl
    Posts
    1,999
    okie this is interesting
    But did anyone really tried the b16 manifold? Or was it just an idea or eyeball measurements?
    So any other (better) manifold will fit?

  3. #3

    PhydeauX's Avatar
    Join Date
    Apr 2002
    Vehicle
    85 accord (2x DCOE) 88 Nova (4AGZE + msII) 98 Jetta TDI
    Location
    Eastern Penna
    Posts
    1,634
    B20A from gen3 accord. This has been confirmed many times.
    B18A/B Requires drilling 2 holes in the manifold flange. I learned of this from bigblockcrx who is no longer on this board and I've verified this one personaly.
    B16A/B18C5/ITR/etc other vtec motors that use the same head as the B16A. Justanothermike and I have verified this one. It also requires drilling the flange. 3 or 4 holes I believe, I'm not at home to look at my notes.

    Manifolds that don't fit but look close.
    ZC
    D16A

    andy

  4. #4

    carotman's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LX/B20A | 87 Accord Hatch "S" Stock | 94 Civic Hatch CX
    Location
    Montreal South Shore
    Posts
    9,984
    The B18C1 manifold is different from the B16A too. I don't know if it fits tough

    http://pages.videotron.com/omus
    3geez member since July 12 2000

    I need these parts!
    https://www.3geez.com/forum/showthread.php?t=67742

  5. #5

    PhydeauX's Avatar
    Join Date
    Apr 2002
    Vehicle
    85 accord (2x DCOE) 88 Nova (4AGZE + msII) 98 Jetta TDI
    Location
    Eastern Penna
    Posts
    1,634
    No good on the B18C1. Its on the C5 that fits. From the 95 integra gsr or whatever.

    andy

  6. #6
    SEi User B16 ED9's Avatar
    Join Date
    Apr 2002
    Location
    Arlington, WA
    Posts
    1,880
    the c5 is from the integra type r

  7. #7
    SEi User
    Join Date
    Jun 2001
    Vehicle
    88 lxi coupe
    Location
    gainesville, fl
    Posts
    1,999
    So I suppose aftermarket (performance) intake manifolds from these engines will also fit. How about the TB?

  8. #8
    SEi User toastyghost's Avatar
    Join Date
    Mar 2002
    Vehicle
    a 93 z34 that's getting parted out, an 86 accord lx that now lives in a j/y, and a 90 camry le that the state no longer allows me to drive. soon to be replaced with an aprilia rs50 or a derbi gpr.
    Location
    Harrisonburg VA
    Posts
    1,316
    I would assume that if you can make the manifold fit, you can use whatever throttle bodies normally fit that particular manifold. Anybody know if any of this stuff will also bolt to an Accord B20A with similar modification? Building an engine with that much torque so it could rev to 10k would give me an orgasm...
    ~<+045+ygH05+>~

  9. #9
    LXi User
    Join Date
    May 2002
    Vehicle
    89 LXI
    Location
    Maryland
    Posts
    603
    Exactly ghost!!! Just think once you use another manifold, you'll be able to use any aftermarket part that they may have for that manifold like fuel rails, injectors and tb's....... So with a manifold conversion you have just increased your air and fuel capabilities......:super:

  10. #10
    SEi User toastyghost's Avatar
    Join Date
    Mar 2002
    Vehicle
    a 93 z34 that's getting parted out, an 86 accord lx that now lives in a j/y, and a 90 camry le that the state no longer allows me to drive. soon to be replaced with an aprilia rs50 or a derbi gpr.
    Location
    Harrisonburg VA
    Posts
    1,316


    Edelbrock ITR manifold has operative range up to 11k I think..
    ~<+045+ygH05+>~

  11. #11
    LXi User
    Join Date
    May 2002
    Vehicle
    89 LXI
    Location
    Maryland
    Posts
    603
    Just image you having a venom manifold, the ones that are built basically for NOS, on a 3rd gen....... Those manifolds are nice as hell!!!

  12. #12

    PhydeauX's Avatar
    Join Date
    Apr 2002
    Vehicle
    85 accord (2x DCOE) 88 Nova (4AGZE + msII) 98 Jetta TDI
    Location
    Eastern Penna
    Posts
    1,634
    Yeah, the manifold will fit. Its a b18a btw and starts later then 87 (I think 89). The problem is that the manifold has to tip 15° down to be mounted on an a20a. The b18a sits pretty much strait. I tryed this path already. You can't just bend the manifold, and cutting and rewelding it puts you back at square 1. Only you just paid $500 for a manfiold that you're going to have to cut up. Because the b18a has part of the water jacked in its manifold it pushes the cost up. You don't have to worry about the angle when doing efi, before someone asks.

    andy


  13. #13
    SEi User MoonScryer's Avatar
    Join Date
    Apr 2002
    Vehicle
    1986 Prelude 2.0si turbo - 1990 Integra moutain carver - 1993 Nissan 300ZXTT w/ more power than god
    Location
    Atlanta, GA
    Posts
    1,775
    Also, for anyone who forgot, the B20A is Openloops, 87 LXi hatch is running a B16A manifold; they said it helped the power curve nicely.

    My next stop: Skunk 2 B18B manifold. As if I have money, but I can work for it
    I am the wrath of the server you curse and the demon of the directory you cry about - making life hell for users, one deleted file at a time.

  14. #14
    SEi User toastyghost's Avatar
    Join Date
    Mar 2002
    Vehicle
    a 93 z34 that's getting parted out, an 86 accord lx that now lives in a j/y, and a 90 camry le that the state no longer allows me to drive. soon to be replaced with an aprilia rs50 or a derbi gpr.
    Location
    Harrisonburg VA
    Posts
    1,316
    me and edelbrock are going to do a magic show for yall as soon as i rob a bank or somethin.. :P
    ~<+045+ygH05+>~

  15. #15

    PhydeauX's Avatar
    Join Date
    Apr 2002
    Vehicle
    85 accord (2x DCOE) 88 Nova (4AGZE + msII) 98 Jetta TDI
    Location
    Eastern Penna
    Posts
    1,634
    http://cgi.ebay.com/ebaymotors/ws/eB...tem=1871743941 If anyone is interesrted I came across this.

    andy


  16. #16
    LXi User
    Join Date
    May 2002
    Vehicle
    89 LXI
    Location
    Maryland
    Posts
    603
    I saw on of those on ebay the other day but it was way cheaper than that one...... That would be nice to have......

  17. #17
    LXi User
    Join Date
    May 2002
    Vehicle
    89 LXI
    Location
    Maryland
    Posts
    603
    So will the B18c manifold fit or not???

  18. #18
    SEi User toastyghost's Avatar
    Join Date
    Mar 2002
    Vehicle
    a 93 z34 that's getting parted out, an 86 accord lx that now lives in a j/y, and a 90 camry le that the state no longer allows me to drive. soon to be replaced with an aprilia rs50 or a derbi gpr.
    Location
    Harrisonburg VA
    Posts
    1,316
    DA FUEL HOLES LINE UP BUT DA OTHAR HOLES DON'T ALL LIEN UP
    ~<+045+ygH05+>~

  19. #19
    LXi User
    Join Date
    May 2002
    Vehicle
    89 LXI
    Location
    Maryland
    Posts
    603
    Say what??? Are you just talking about the B18c??? You know what, I just noticed you're from the burg, I went and played football at Madison........ Small world......

  20. #20
    LX User
    Join Date
    Apr 2002
    Posts
    421
    so a b16a intake manifold will fit on an A20Ax head right? if you go the fuel injected route, you only need to drill 2-4 more holes in the intake for the bolts to line up, and from then on its a bolt on affiar? you would then need all the sensors, T/b and injectors right? also how would you wire that?

    toasty: to rev up to 11k you need more than a solid intake manifold you need a bulletproof valvetrain with better retainers springs etc...
    Aka mugenaccord from the ole ole ole board
    Pheonix Red CA6 -- Sold
    Grey ED6 -- current project

  21. #21
    SEi User toastyghost's Avatar
    Join Date
    Mar 2002
    Vehicle
    a 93 z34 that's getting parted out, an 86 accord lx that now lives in a j/y, and a 90 camry le that the state no longer allows me to drive. soon to be replaced with an aprilia rs50 or a derbi gpr.
    Location
    Harrisonburg VA
    Posts
    1,316
    I know that the manifold isn't the only thing that needs heavy upgrading to get that kind of rev range, but I don't want that to be the limiting reagent. AND THIS THREAD IS ABOUT MANFIIOLDS

    HARISONBURUG KIKCK ARSE
    It's great to finally find someone that knows where the hell this place is...
    ~<+045+ygH05+>~

  22. #22
    LXi User 1989se-i's Avatar
    Join Date
    Aug 2002
    Vehicle
    89 Accord SE-i Coupe
    Location
    Jokelahoma
    Posts
    721
    Which car has the b16a engine in it?
    Performance Modz: Short Ram Air Intake, Custom Exhaust w/o Cat & Resonator, Cherry Bomb Turbo Muffler, Accel Coil, Removed AC

    Other Modz: Clear Blinkers, Purple Calipers, Accord Emblem On Dash, Winking Headlights

  23. #23
    DX User
    Join Date
    Oct 2002
    Vehicle
    1986 Honda Accord LX
    Location
    Georgia, USA
    Posts
    65
    90-93 integra X-Si and R-Si had a b16a in it..Japan only
    civics an crx's had b16a's in them also del sol

  24. #24

    Sabz5150's Avatar
    Join Date
    Apr 2002
    Vehicle
    1989 Accord SE-i coupe
    Location
    Richmond, VA
    Posts
    3,069
    Individual throttle bodies would be a dream

    -5150
    My collection: Stay tuned! (04/02/2009)

    Quote Originally Posted by bobafett View Post
    glorious!

    imagine a beowulf cluster of tho... oh wait... its sabz. how is the beowulf cluster of myth boxen treating you?

  25. #25

    Justanothermike's Avatar
    Join Date
    Apr 2002
    Vehicle
    88 LX-i coupe 91 LX coupe
    Location
    CA, San Francisco
    Posts
    570
    Originally posted by Sabz5150
    Individual throttle bodies would be a dream

    -5150
    it can verywell become reality

Similar Threads

  1. victor x intake manifold modded for a20a/b20a
    By mykwikcoupe in forum For Sale
    Replies: 0
    Last Post: 07-17-2011, 12:47 PM
  2. Intake manifolds
    By Rendon LX-i in forum Performance
    Replies: 66
    Last Post: 02-14-2010, 10:45 AM
  3. B20A-brown top and black top intake manifolds
    By AccordB20A in forum EFI Tech
    Replies: 7
    Last Post: 05-16-2007, 08:28 AM
  4. WANTED!!! pic of A20A carbed Intake on B20A
    By L3G10N in forum Classic Honda Pics & Videos
    Replies: 18
    Last Post: 09-15-2005, 08:58 PM
  5. b20a/a20a intake, fuel rail, injectors etc
    By Versanick in forum EFI Tech
    Replies: 5
    Last Post: 10-23-2003, 10:16 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink