energy suspention bushings

[Mantis88LX]

so we can get them right? what is the part number for the ones that will fit a 88-89 lxi rear sway bar, also how much will that cost and does it come with the mounting brackets and bolts?

thanx

[jteuton]

The one's I got Mantis were universal.....all you have to know is the diameter of the swaybar. You can get them at summit or jegs. Mine came with brackets but no bolts. It also has a zerk fitting were it can be greased regularly. I think the diameter of the rear stock bar is like a 1/4 or 5/16 but I don't know now since I already have it packaged up and sent away. I shipped it out yesterday. It cost $8.21. I hope you can receice it by Saturday. My stock bushings are in super good shape so you might want to consider reusing them and just getting brackets of a parts car for the bar. Peace.

[Mantis88LX]

yea i got it today man, this morning,

i guess ill just reuse the stock bushings, they are in great shape. so all i need it the brackets and the bolts for the brackets?

[jteuton]

yep and the nuts that fasten the links to the arms......you see the threads on the endlinks....you'll have to find a nut to fit that cause I had to reuse mine. Did you like my custom packaging job? The first time they wouldn't take it cause they said it wasn't taped right so I taped the hell out of it the second time....did you have a hard time getting in the box? I used like a half a roll of tape just to piss the customer service guy off. I addressed the package to the current resident cause I couldn't remember your last name. I hope you enjoy it.

[Mantis88LX]

hah yea i got it, yea it took me awhile to get it open,

hey dont i need the mounting bracket ? here is a link http://www.geocities.com/carotman/3g...rs/bracket.txt

also the endlinks? http://www.geocities.com/carotman/3g...rs/endlink.txt i think i already have that on the bar, it just looks different

thanx


p.s damn its cold, dont know if im gonna put it on yet, i cant work well in teh cold weather.

[jteuton]

no I included the endlinks.......(they are on the end of the bar where the small bushings are.....they twist backwards and forwards) .....all you need is the two brackets, two screws, and the two nuts that tighten the endlinks to the control arms. If you look at the end of the endlink you will see threads where the nut goes to tighten them onto the control arm.