energy suspension bushings ALL.

[Rendon LX-i]

K im doing this since i have some rear inner control arm bushings shot (ones to set toe). I been searching for the last couple hrs. i found mostly all the part numbers except the inner bushings on the rear lower arms.


This is what i got.

Energy suspension Red.

Front.

8-1201 Front strut rod bushings.
8-907 Front lower shock bushings.
8-210 Front lower control arm bushings.
9-5126 Front sway bar bushing set.


Rear.

8-904 Rear shock bushing kit. (Kit comes with 4 strut rod bushing for top hats for fronts hat fits so nothing is wasted)
8-312 Lower control arm kit. (You have to take the bushings out of the sleeves an insert them to the stock sleeves. In order to do that you need to remove the center an deburr the lip an install)

2DA83852-C4E9-471F-9446-44FBE7304067.mp4 Video by Rendonlxi | Photobucket

total $185.05 SHipped. gotta love ebay LOL

Gots to love tax season. LOL. time to get er done.

theses are kits from Angus posted up. seen these bushings on his car (beautiful belly) its time to give some care to my old gurl.

had to jump around all over to find these parts. So hope this can become a sticky.

Update finally done with the bushing install. Was a pain but worth the reward.




Video does justice http://youtu.be/4PMo_wX38NE

[obd0driver]

Nice list. Here's one the you missed however it not made by energy suspension. They may come in handy.

Web Store

[ShyBoyCA6]

I just need to do my rear end suspension but eh I'll do it later. Good job on finding them but legend master has his thread with the part number too. Lol.

[Rendon LX-i]

Angus has em on his car. Aka mesty. I just want it all done you know

[obd0driver]

I feel you. I'm just missing the rear control arms.

[Rendon LX-i]

Just wanted to make sure I had the correct part numbers

[RAZR]

Do those prothane control arm bushing have to be pressed in like the oem ones?

The front control arms.

[obd0driver]

No they come in halfs

[Rendon LX-i]

you have to press the sleeve the give you in first

[ShyBoyCA6]

Make sure to lube them correctly to avoid squeaking suspension. I remember when i did the fronts LCA holy shit was it a bitch without a press to get those fuckers out. Method i used was drill to cut a most of rubber and a handsaw to cut the metal ring out. i suggest you heat them up so it will make the job easier.

[Rendon LX-i]

I got a press

[Vanilla Sky]

I have a press and still burn the old ones out.

[Rendon LX-i]

Also ordered threw Honda (employee discount) shifter cage seat,new shifter colar an bushings. Only bushing I don't have is the u-joint bushing which are not replaceable unless you get chedda bushing kit. Should of done lol. But I got away around it using Home Depot supply's lol. Ill post that up as well. Ill be doing a how to pics an vids . Everyone else slacking on that part.

[ShyBoyCA6]

Also ordered threw Honda (employee discount) shifter cage seat,new shifter colar an bushings. Only bushing I don't have is the u-joint bushing which are not replaceable unless you get chedda bushing kit. Should of done lol. But I got away around it using Home Depot supply's lol. Ill post that up as well. Ill be doing a how to pics an vids . Everyone else slacking on that part.

Lol finally some one else is putting some work in with pics and Vids.

[Rendon LX-i]

will i was comparing the rear lca bushings with with a new bushing from honda . its a no go the sleeve on the Rear Lca kit is to big..............


BUT...........

if you take apart the bushing (prothane kit 8-312) the bushing it self fits the stock sleeve after knocking out the rubber and metal tube. You will have to untapper the stock lca bushing sleeve to get the Prothan insert to fit. Bing bam done. ill have to post pics. but just wanted to throw that out there. ive compared should fit no problem. (i have a new stock rear lca bushing)

[Vanilla Sky]

Hey, are you doing pics? I think I'm going to do this soon-ish, and I can take pics if you haven't been. I've got to freshen up my suspension, so I'm going to go with poly while I'm at it. Maybe we'll get a good how-to out of it.

[Rendon LX-i]

Yea ill be posting pics .

[Tdurr]

where are the pic at??

[Vanilla Sky]

I still haven't bought the parts to do mine. Waiting on this GB to be over with to do anything expensive.

[Rendon LX-i]

ive been slacking gots tons of pics of the bushings install in trans and what not. just no time work then workout and im done lol.

Ill be doing this all in one day ill do a detail how to so you can post it up. if anyone does it before me then good lol. but i just got a new job (no more chevy. pay was garbage lol) going to a all import indepent shop that came to me for help. im pretty good at imports so should making some good money and get me some goods for the accord and myself as for tools and bigger box from snap on or cornwel. will see.

but i havent forgottan so bare with me i always deliver so dont get me all wrong lol

[MessyHonda]

very curious if the rear bushings will work.

[Rendon LX-i]

It will pics where posted way back an a how to .

[ShyBoyCA6]

Once a slacker always a slacker hahaha

[Rendon LX-i]

Have kids,bills, an workout everyday. Then say I'm a slacker lol. When it gets done it gets done

[lostforawhile]

here's the hard poly upper control arm bushing kit Web Store