Page 1 of 2 12 LastLast
Results 1 to 25 of 26

Thread: NOS Nitrous Kit 4 sale off my 3gee hybrid

  1. 10-29-2002, 02:58 PM #1
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50

    NOS Nitrous Kit 4 sale off my 3gee hybrid

    I need to sell this Model# 5122 NOS universal dry nitrous kit because i got a 4 point speeding ticket and must pay it. The bottle was babied no scratches from the brackets. It was from my B16a Hybrid motor and i will include the wiring and banjo bolt already to be bolted on. very easy to install will come with 50 , 60 , and 75 shot jets. there are 2 50 shot nitrous jets. can let go for $365 shipped ups 3 day or best offer


    here is a link to what the system looks like, what u see is what u get plus one extra 50 shot jet


    http://www.holley.com/HiOctn/ProdLin...f05122NOS.html

    thank u for reading
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop



  2. 10-31-2002, 03:24 PM #2
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50
    come on doesnt n e one want a nitrous kit damn near brand new i only filled the bottle i think around ten times very good kit ill even take $335 shipped i paid $540
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  3. 10-31-2002, 03:29 PM #3
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50

    want NOS NitrousOxide look here

    hey i really need to let my NOS kit go to pay a ticket i need $335 shipped look for my post in the MARKET PLACE forum.

    thanx
    later
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  4. 10-31-2002, 03:39 PM #4
    GreenMachine
    GreenMachine is offline
    LXi User
    Join Date
    May 2002
    Vehicle
    accord HB ( metallic green)
    Location
    B.C Chilliwack
    Posts
    632
    $ 335 canadian ...
    89 efi conversion
    17" katana, lude arms, full 2" exhaust/hollowed cat, Ractive intake, centerforce dual friction, msd coil/wires
  5. 10-31-2002, 05:15 PM #5
    jteuton
    jteuton is offline
    LX User
    Join Date
    May 2002
    Vehicle
    88 Lxi/ 5spd
    Location
    Tennessee
    Posts
    490
    thats a hella ticket
    In the end...it doesn't even matter.
    88 Lxi, 5spd swap w/ Aasco 8lb flywheel/Cai,AccelCoil,NologyWires,SilverstoneSparks/DC421,ColtCam,Remachined Head&Tb...NitrousWorks 40shot
  6. 10-31-2002, 06:42 PM #6
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50
    uh $335 US pleze someone help me out thanx
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  7. 10-31-2002, 07:19 PM #7
    shepherd79
    shepherd79 is offline

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466
    that is the problem with people on this board, they want so many things but they can't afford them.
    Alex.
  8. 11-03-2002, 10:14 AM #8
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50
    hey man i just need to get rid of this kit so i won't have to go 6 months without a liscense im doing myself the favor besides my car is still fast without the bottle wanna race.
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  9. 11-03-2002, 11:48 AM #9
    da6integra
    da6integra is offline
    LX User
    Join Date
    Oct 2002
    Vehicle
    1990 Integra GS
    Location
    Miami/Coral Gables.Fl
    Posts
    162
    You got a better chance of selling it on g2ic.com No offence to 3rd gens but 1.8dohc in integras will take the brunt of nos a lil better Critisize away
  10. 11-03-2002, 11:58 AM #10
    pmip
    pmip is offline
    LXi User pmip's Avatar
    Join Date
    Oct 2002
    Vehicle
    '98 civic ex
    Location
    USA
    Posts
    641
    Try ebay, that seems to be the place where all the fast & furious wannabes get their "Nawzzzz" kits for their parents neons!! My brother bought a zex kit for his g2 teg, decided he would rather go NA, and sold it on ebay for $100 more than he paid for it!
    -Ryan

    Pure White 1988 DX Sedan

    "It takes a big man to cry. And, an even bigger man to laugh at the big man crying"
  11. 11-11-2002, 12:03 PM #11
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50
    come on i even posted on other forums and 0 positive replies how about $300 shipped to any 3geezer or just $275 if u wanna pick it up and shipping is ups ground with trackimng#

    thanx n e one

    oh yeah i will accept a trade of a WORKING PR3 ECU because i know someone here on this board can purchase one for much less than $250 then trade me for my NOS nitrous kit and make out like a bandit
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  12. 11-11-2002, 12:16 PM #12
    88LXi68
    88LXi68 is offline
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120
    depending on how long you still have it for sale I **MAY** be interested. I would need to gather the money up. Could be the final peice of the puzzle for my LS/Vtec set up.
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty
  13. 11-12-2002, 12:01 PM #13
    1989se-i
    1989se-i is offline
    LXi User 1989se-i's Avatar
    Join Date
    Aug 2002
    Vehicle
    89 Accord SE-i Coupe
    Location
    Jokelahoma
    Posts
    721
    Is the price $300?

    Ill take it if itll werk on my 3G
    Performance Modz: Short Ram Air Intake, Custom Exhaust w/o Cat & Resonator, Cherry Bomb Turbo Muffler, Accel Coil, Removed AC

    Other Modz: Clear Blinkers, Purple Calipers, Accord Emblem On Dash, Winking Headlights
  14. 11-13-2002, 03:46 PM #14
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50
    this kit came off of my 86 accord with the fuel banjo bolt already tapped for the fuel cut off switch, this would have been the hardest part of the install but it is already done! so all u gotta do is hook up the wires, install the nozzle ,mount the bottle then u are ready to go. a very quick powerful extra 50+ horsies

    thanx later

    if ne one has any specific questions post and ill happily reply
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  15. 11-14-2002, 11:52 AM #15
    quagmire
    quagmire is offline
    LX User
    Join Date
    Jul 2002
    Vehicle
    1989 LX-i Coupe 5spd
    Location
    Texas: Austin during the school year, Houston otherwise
    Posts
    118
    hmm, so tempting. We'll have to see what the parents say.
  16. 11-14-2002, 11:53 AM #16
    1989se-i
    1989se-i is offline
    LXi User 1989se-i's Avatar
    Join Date
    Aug 2002
    Vehicle
    89 Accord SE-i Coupe
    Location
    Jokelahoma
    Posts
    721
    Sorry dude, i wont be able to get it.
    Performance Modz: Short Ram Air Intake, Custom Exhaust w/o Cat & Resonator, Cherry Bomb Turbo Muffler, Accel Coil, Removed AC

    Other Modz: Clear Blinkers, Purple Calipers, Accord Emblem On Dash, Winking Headlights
  17. 11-14-2002, 11:58 AM #17
    quagmire
    quagmire is offline
    LX User
    Join Date
    Jul 2002
    Vehicle
    1989 LX-i Coupe 5spd
    Location
    Texas: Austin during the school year, Houston otherwise
    Posts
    118
    Crap, wasnt paying attention to what I was doing. The kit has already been modified, so it'll be just a bolt-on? Thats great! I mean I have no aversion to fabrication, but if I dont have to then fine. I'll need to pay rent and stuff first and look at where I am financially, so consider me very interested. Damn, I hate being a poor college student.
  18. 11-14-2002, 12:03 PM #18
    quagmire
    quagmire is offline
    LX User
    Join Date
    Jul 2002
    Vehicle
    1989 LX-i Coupe 5spd
    Location
    Texas: Austin during the school year, Houston otherwise
    Posts
    118
    Aww crap, I've done it again. You have a b16, so whats the diff between what you've done and what I'll have to do to make the system fit? Or will I need more parts? You only have >50 shot jets, can a stock A20 take that?
  19. 11-15-2002, 09:21 AM #19
    quagmire
    quagmire is offline
    LX User
    Join Date
    Jul 2002
    Vehicle
    1989 LX-i Coupe 5spd
    Location
    Texas: Austin during the school year, Houston otherwise
    Posts
    118
    You'd think if this guy was trying to sell something he'd check the board at least once a day.
  20. 11-15-2002, 11:19 PM #20
    quagmire
    quagmire is offline
    LX User
    Join Date
    Jul 2002
    Vehicle
    1989 LX-i Coupe 5spd
    Location
    Texas: Austin during the school year, Houston otherwise
    Posts
    118
    Sorry if I got your hopes up, but I cant afford the kit right now. Sorry.
  21. 11-17-2002, 09:02 PM #21
    whiteboy
    whiteboy is offline
    LX User
    Join Date
    Aug 2002
    Vehicle
    1989 4dr LX-I
    Location
    Sparta, NJ
    Posts
    325
    shit if i had a running 3g still or extra cash id buy it, hey guys, those PR3 ECU's have got buy in now prices of $175 on ebay. . . . someone should def pick him up on this trade


    Jordan
    Custom Body Kit, Custom Intake, Custom Mystic Paint, Custom complete white and blue interior, DVD/MP3 stereo in works...........soon 4 u 2 c
  22. 11-18-2002, 06:58 AM #22
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50
    yeah man thanx u do got a point

    and i just wanna say ill take offers and trades now so lemme know what u got because i still got the kit
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  23. 11-18-2002, 09:26 AM #23
    Jdub07
    Jdub07 is offline

    Jdub07's Avatar
    Join Date
    Apr 2002
    Vehicle
    1986 Honda Accord DX Hatchback
    Location
    Newark, CA
    Posts
    860
    I'd buy it if I could bolt it right into my mustang!:super:
    86 accord dx wrecked
  24. 11-19-2002, 10:30 AM #24
    custom86Lxi
    custom86Lxi is offline
    DX User
    Join Date
    Jul 2002
    Vehicle
    1986 Honda Accord LX-i
    Location
    mile high west side CO
    Posts
    50
    yeah fords have a vacum controlled FPR so it will work but u might have to re tap your fuel banjo bolt because im sure it is bigger than my banjo bolt and it was originaly sold as a universal dry manifold kit for fuel injected cars

    get back
    interior: carbon fiber e-brake handle, OBX steering wheel with MOMO hub, carbon fiber shifte,Type R pedals

    exterior: black steelies

    engine: B16A1, stock headers, ITR valve cover, MSd cap with accel coil, 96 accord intake with about 2 inches cut off, NOS 60 shot

    suspension: sprint springs with TOKICO blue skocks 2.25" drop
  25. 04-26-2004, 08:23 AM #25
    3rdGAccordGuy247
    3rdGAccordGuy247 is offline
    DX User
    Join Date
    Feb 2004
    Vehicle
    1989 Accord I/H/hi flow cat and cat back/electrical
    Location
    Anaheim, Ca
    Posts
    24
    im looking at 350 cash in my hands right now. sTILL HAVE THE KIT and what is everything that is included. Switches , bolt hook ups for the nozzle????
    Seth
« Previous Thread | Next Thread »

Similar Threads

  1. 3gee For Sale, $250, slightly hooned.
    By 2ndGenGuy in forum Classic Honda Community Chat
    Replies: 10
    Last Post: 07-28-2009, 07:34 AM
  2. Unique nitrous idea? (3gee go kart project)
    By FyreDaug in forum Performance
    Replies: 5
    Last Post: 08-11-2006, 09:52 PM
  3. nitrous bottle for sale 10oz
    By stolenracer in forum Trading Post
    Replies: 25
    Last Post: 01-19-2004, 02:12 PM
  4. ***3Gee 4 Sale***
    By 89AccordLXI666 in forum Trading Post
    Replies: 15
    Last Post: 09-28-2003, 07:49 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink