Instrument Cluster Removal. Done!

[2ndGenGuy]

Yeah, my 2g (though it uses different gauges) sits there, as does my 81. About 1/4 should be perfect.

[charliefowle03]

Yeah, my 2g (though it uses different gauges) sits there, as does my 81. About 1/4 should be perfect.

phewww! finally something is normally functioning. its been pretty steady at 1/4. while on the freeway at 70 its around 1/8< not quite that low though. now i just need to get these calipers straightens out. 1 or maybe both are seizing up. the rotors are warped at this point got some good pulsation in the pedal while braking. and some steady vibration in the wheel at 65. 5 doing the shopping 100$ for calipers , 50$ for rotors, 15$ for pads. brings the total repair to.... ugh i have spent too much on my car this month... oh well im just grateful its running proper for now. need to do a valve cover gasket and possibly find the other spot where i mat be leaking some oil. does anyone have a center console for a 2g for salle. =?? just the shifter piece.

[Hazwan]

I could get you the tape holder for a 2g if you want to.

As for the temp my 1g stays at 1/4 most of the time unless I stopped in traffic where it would creep to 1/2 before the fan would kick in and pretty much stayed between 1/4 and 1/2 but then its a 1g

[charliefowle03]

I could get you the tape holder for a 2g if you want to.

As for the temp my 1g stays at 1/4 most of the time unless I stopped in traffic where it would creep to 1/2 before the fan would kick in and pretty much stayed between 1/4 and 1/2 but then its a 1g

i already have the tape holder. thank you Haz. i no longer have a proper piece that goes around the shifter. if possible it would be even better to get the console piece that holds the tape holder piece. but i can settle for the standard one. its just chopped up and mangeled at the moment and has been for awhile its really an eye sore for me. i need a donor 83 accord badly.

[Hazwan]

I mean this piece

[charliefowle03]

I mean this piece

Yaaahhh. Whatcha looking for $. . Plus shipping over the sea?

[Hazwan]

Offer me a price. I have no idea how much shipping would be but probably not that much

[charliefowle03]

Offer me a price. I have no idea how much shipping would be but probably not that much

What's the zip round those parts? I ran a little dummy test at ups... 150$ to ship?? My zip is 43224 United States.

[2ndGenGuy]

Never have seen that tape holder before. Doesn't have the slot for the EQ. Must be an 82-83 thing.

[Hazwan]

It's made tyte JDM yo

[charliefowle03]

It's made tyte JDM yo

Is the jdmness still functional in the cup holders?