Page 2 of 15 FirstFirst 12345612 ... LastLast
Results 26 to 50 of 362

Thread: My 86 Prelude Thread

  1. #26
    DX User johng's Avatar
    Join Date
    Mar 2012
    Vehicle
    1988 honda accord hatch
    Posts
    16

    Re: My 86 Prelude Thread

    nice project keep us posted on updates



  2. #27
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    PICS!

    Click image for larger version. 

Name:	1235490_10151641729092106_1015752442_n.jpg 
Views:	1323 
Size:	67.5 KB 
ID:	5431

    Click image for larger version. 

Name:	1235226_10151641729212106_1004011103_n.jpg 
Views:	1272 
Size:	63.9 KB 
ID:	5432

    Those stupid plug wires piss me off but oh well that can wait!

    Oil after 20 mins run, mostly idle. I only did one flush after the second headgasket job and it stayed this cloudy so its definitely good now! I'm going to flush out the oil again and hopefully it would stay clear this time! Any tips/tricks to fully get the old white stuff out?

    Click image for larger version. 

Name:	1238735_10151641729182106_339393253_n.jpg 
Views:	1280 
Size:	52.4 KB 
ID:	5433

    Also cleaned the sunroof tracks when I had the sunroof checked since it was leaking like mad. The glass doesn't sit flush with the roof. Ended up adding a couple of washers about 3-4mm thick ><

    Click image for larger version. 

Name:	1175037_10151641728552106_1080728477_n.jpg 
Views:	1216 
Size:	45.2 KB 
ID:	5434

    Click image for larger version. 

Name:	1240591_10151641728522106_421428082_n.jpg 
Views:	1249 
Size:	33.0 KB 
ID:	5435

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  3. #28
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    I went to the yard with a 5 speed 2g Prelude yesterday. Keep in mind that Preludes are really hard to come by here, let alone the older generations and they just happen to have 2 of them. One has been stripped with nothing good usable while the other one has its 5 speed components still intact.

    Asked them how much would it cost to get all the 5 speed conversion parts.. They said....... US$1000. WAT.

    Are you fucking kidding me? If the transmission is 100% new or at least has been rebuilt and came with brand new clutch/cables/bushes etc sure but $1k for something that you're not even sure if it still working? LOL fuck that.

    Went to another yard that I regularly to and the guy whos friends with me told me that he might be able to help to find me the parts from other yards from other area/state and it would be sure as fuck be less than a grand hah! He also told me that he could get the transmission alone for around $300 which is fair. The other yard wanted $600 for the transmission alone. You nuts? People are selling modern VTEC manual conversion parts for a LOT less than that.

    Oh well looks like the 5 speed conversion has to wait. Worst case I'll just grab the pedals and the gear linkage from that cut throat yard lol I could get the rest of the parts from that other yard for a LOT cheaper.

    Bonus instagram pic:
    Click image for larger version. 

Name:	tumblr_msxogsG4xy1qhti9ao1_1280.jpg 
Views:	1284 
Size:	136.2 KB 
ID:	5463

    Found this the other day

    Click image for larger version. 

Name:	735792_10151646402062106_1352949881_o.jpg 
Views:	1218 
Size:	175.6 KB 
ID:	5464

    Click image for larger version. 

Name:	1291604_10151646403097106_1075326181_o.jpg 
Views:	1214 
Size:	181.1 KB 
ID:	5465

    Click image for larger version. 

Name:	559259_10151646404437106_677336481_n.jpg 
Views:	1225 
Size:	92.8 KB 
ID:	5466

    Click image for larger version. 

Name:	1234864_10151646405477106_1117883485_n.jpg 
Views:	1233 
Size:	96.5 KB 
ID:	5467

    Looks like its been hit on the left/passenger's side quarter panel before. Theres a bunch of bondo on it and the crumpled sheet metal as seen in the pics made it clear. Oh well its not a huge deal for me its getting a ground up restoration soon

    I also took the car for a test drive in the neighborhood. Drives fine, autotragic shifts fine, steering feels good, brakes are good which is surprising since the car has been sitting for at least a year. I need to flush the old fluid though but yeah the car is ready for the inspection and I can slowly start with other misc bits and pieces now
    Last edited by Hazwan; 09-21-2013 at 03:29 AM.

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  4. #29
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Done quite amount of work since last week. Decided to fix the quarter panel rust.

    Stripped the 312321321 inches thick of filler
    Click image for larger version. 

Name:	993716_10151662154477106_81315233_n.jpg 
Views:	1249 
Size:	50.0 KB 
ID:	5468

    Click image for larger version. 

Name:	150703_10151662154502106_2110397822_n.jpg 
Views:	1251 
Size:	53.5 KB 
ID:	5469

    Click image for larger version. 

Name:	1185799_10151662154507106_950766307_n.jpg 
Views:	1242 
Size:	54.6 KB 
ID:	5470

    ooookay looks like they decided to add a bunch of filler to fill the line and made a new one out of.. filler. wtf really?

    All gone
    Click image for larger version. 

Name:	547006_10151662155162106_2114795625_n.jpg 
Views:	1238 
Size:	44.3 KB 
ID:	5471

    Etching primer
    Click image for larger version. 

Name:	1231701_10151662155187106_472958978_n.jpg 
Views:	1241 
Size:	39.9 KB 
ID:	5472

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  5. #30
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Added a bunch of filler. Not as thick as the old one though
    Click image for larger version. 

Name:	1234034_10151671074157106_1305619944_n.jpg 
Views:	1227 
Size:	42.1 KB 
ID:	5473

    Click image for larger version. 

Name:	1237143_10151671074137106_1257395242_n.jpg 
Views:	1192 
Size:	37.6 KB 
ID:	5474

    Click image for larger version. 

Name:	12962_10151671074132106_1789556989_n.jpg 
Views:	1261 
Size:	35.9 KB 
ID:	5475

    It was a bitch to shape the wheel arch line though since the original line is non-existant. This is not the best way to do it but finding a replacement quarter panel is going to be.. impossible. The next best thing I could do is to weld new metal on, probably cut from front fender or something but then I have no welder

    Passenger side has a bunch of filler on the rocker panel too -.-
    Click image for larger version. 

Name:	935950_10151671074357106_1129464938_n.jpg 
Views:	1256 
Size:	41.7 KB 
ID:	5476

    Both quarter panels has been hit before. I'm guessing they sideswiped something on the right side since the fender and door came from a red car. Can't be sure about the left side though. Door is original, at least I thought it is but the quarter panel is trashed. I don't feel like doing that side yet.

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  6. #31
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: My 86 Prelude Thread

    yay for progress
    Last edited by A18A; 09-21-2013 at 01:46 PM.

  7. #32
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    I'm pretty much decided to go ahead with full respray instead of just patching rusted out panel(s) so I've stripped the passenger's side quarter panel too



    Just. look. at. that


    Seriously guys


    All gone


    Long tedious process of applying filler then sanding. Repeat.




    At least I know the bare metal has been treated properly and shouldn't rust anytime soon. And only minimal amount of body filler used hah!

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  8. #33
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Let's see what do we have under the paint on the driver's side door..


    Just. kill me.


    Nope




    I'm going to fucking kill somebody!


    At least the roof is 99% filler free

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  9. #34

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,674

    Re: My 86 Prelude Thread

    What is the red on that door?
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  10. #35
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Both driver's side door and fender used to be red which led me to believe that PO must have hit something pretty bad on that side basically messed the whole side up and they had both door and fender replaced and had to fix the quarter panel with 3321 inch thick bondo.

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  11. #36

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,674

    Re: My 86 Prelude Thread

    Well heck, if you're going to re-sculpt the door out of Bondo, why not use the old one and save the money of buying a replacement panel? Lots of body work there, bud. I'm looking forward to seeing what you do with this build.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  12. #37
    LXi User 79cord's Avatar
    Join Date
    Oct 2006
    Vehicle
    79 Accord hatch, 89 CR-X SiR, '74 Z360 h/top, '81 prelude, '65 S600
    Location
    Melb, Aust.
    Posts
    808

    Re: My 86 Prelude Thread

    Well it least you've seen & fixed worse, & I'm sure this should turn out nicer than that, though it is sad to have to clean up such messes.
    Doesn't seem frighteningly rusty yet.

  13. #38
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Quote Originally Posted by Dr_Snooz View Post
    Well heck, if you're going to re-sculpt the door out of Bondo, why not use the old one and save the money of buying a replacement panel? Lots of body work there, bud. I'm looking forward to seeing what you do with this build.
    My thoughts exactly.

    Quote Originally Posted by 79cord View Post
    Well it least you've seen & fixed worse, & I'm sure this should turn out nicer than that, though it is sad to have to clean up such messes.
    Doesn't seem frighteningly rusty yet.
    Yeah I can't complain much since the car is free haha. There are no major rust thankfully! But if I leave the small rust spots any much longer then it might spread and probably would rust through the metal. Gotta take care of them now!

    Anyway so I found this

    Click image for larger version. 

Name:	993728_10151684769792106_972063559_n.jpg 
Views:	1235 
Size:	60.4 KB 
ID:	5497

    Click image for larger version. 

Name:	1235256_10151684769612106_1593846762_n.jpg 
Views:	1218 
Size:	62.6 KB 
ID:	5498

    Seriously?

    I'm beyond pissed. First they ruined the side molding beyond repair. Who the hell thought its a good idea to rivet through them and then put a bunch of bondo over it? You know there's a way to attach trim bits like this to the body even with broken clips that doesn't require 34242342 inch bondo.. Really dude why not create the molding with bondo from scratch instead?

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  14. #39

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,674

    Re: My 86 Prelude Thread

    :ROFL: I'm glad I'm not the only one who gets worked up about sloppy work. Especially when I have to fix it.
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  15. #40

    AccordB20A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1987 Honda Accord 2.0Si
    Location
    Stratford, New Zealand
    Posts
    7,407

    Re: My 86 Prelude Thread

    Damn that things got as much body filler shit in it as your gold car.

    Wheres the B20A swap pics?!?!?!

  16. #41
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Quote Originally Posted by AccordB20A View Post
    Damn that things got as much body filler shit in it as your gold car.

    Wheres the B20A swap pics?!?!?!
    When you ship me yours dammit!!!!11

    kso I've got the car covered in etching primer now. I actually stripped the whole car minus door jambs but I was distracted with some other work so I had to leave the car in bare metal for 2 days and it started to rust ahhhhh so I sanded every surface rust off and sprayed etching primer on. No pics because I was too busy not trying to stop my car from rotting lol





















    All those red filler spots are basically what needed to fix the dent and dings -.-

    I shaved the side molding holes because there is absolutely no way I'm going to reuse the one you see in the previous post hah!

    Also somebody decided to remove the factory duckbill spoiler and welded the holes shut and managed to warp the hell out of the trunk lid in the process too. Idiots.
    Last edited by Hazwan; 10-01-2013 at 03:46 AM.

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  17. #42
    LXi User 79cord's Avatar
    Join Date
    Oct 2006
    Vehicle
    79 Accord hatch, 89 CR-X SiR, '74 Z360 h/top, '81 prelude, '65 S600
    Location
    Melb, Aust.
    Posts
    808

    Re: My 86 Prelude Thread

    Glad to see you are able to get working upon it so quickly & enthusiastically. It won't have any secrets hidden from you!
    Can't wait to see how you choose to paint & detail it .
    Last edited by 79cord; 10-02-2013 at 02:25 AM.

  18. #43
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    I just happen to have a spare CB7 lip that I've got for free while back. It's in beat up condition but fixable. Obviously it didn't fit properly as its curved up front vs ludes bumper being pretty much square but some minor cutting, I've made it to work!







    I gotta reshape that, no biggie but fitment is great. Same exact length too! No cutting required!






    Looks like I need something to fill the gap here. I'll come up with something I'm sure :p


    Some cutting needed to shape the lip to fit


    It was broken here before, nothing that I can't fix anyway :p


    Bonus Instagram pic from yesterday

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  19. #44

    Dr_Snooz's Avatar
    Join Date
    Jun 2007
    Vehicle
    1989 Accord LX-i
    Location
    Fresno, California
    Posts
    10,674

    Re: My 86 Prelude Thread

    It has almost as much character as your gold car now! LOL
    Dr_Snooz

    "I like to take hammers, and just break stuff, just break stuff." - Beavis


    1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap

    Shop manual downloads available here: CLICK TO VIEW

  20. #45
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Well that CB7 part did not end there. I snagged a pair of side skirts out of a CB7 and obviously it won't fit without a lot of modding.

    Main reason why I need them is to cover up a hack job done by the previous owner where they welded a replacement rocker panel wrong and crooked near the rear wheel and its pissing me off just to even look at it. I can't weld else I would replace them correctly instead but oh well these will do for now I guess.





    Test fit


    This is how much I needed to cut as it was too long


    Trimmed so it would fit flush with the body










    Now I gotta figure out how to mount them properly to the body. A lot of sanding/trimming needed still so it looks rough atm
    Last edited by Hazwan; 10-05-2013 at 09:49 PM.

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  21. #46
    LXi User firefighterwhite89's Avatar
    Join Date
    Jul 2009
    Vehicle
    1986 Honda Accord LXi(Rebuilt)
    Location
    Somerville, Alabama
    Posts
    787

    Re: My 86 Prelude Thread

    Quote Originally Posted by Strangeduck View Post
    Well, oil in water is probably a cracked block. What happens is people get a blown headgasket, engine burns off the water in the cyclinder and gets hot and then block cracks and then they get water in the pan and blame the head gasket. Common mistake. Suck to hear that after all the work you put into it.

    I wish i would have seen this earlier, by what you described with the radiator having that much pressure is sign that you still probably had a head gasket issue or cracked head.
    The a-Series headgaskets may as well be made from egg shells. I've been through 3 in 7 years. Everytime the car overheats, you risk blowing a headgasket on these cars. Almost always seems to be between cyl #2 and #3 but once it got all 4 cylinders but that was when my water pump officially died. Try a HG. More than likely, that's your issue as that is a fairly common issue. ALSO, remember to tighten AND lossen your head bolts evenly in the recommended pattern. The block is Iron, and will take way more crap than any aluminum block. The head is another story. You'll warp or crack your head being aluminum before you'll blow your block unless you run the motor waaayyyy too low on oil. I've had oil in the coolant AND coolant in the oil before. Both were the HG. And another lesson i've learned...pick a fel-pro head gasket. Don't go cheap.
    Shaggy
    FF II/ETC I


    "What's my age again? What's my age again?"

  22. #47
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: My 86 Prelude Thread

    Project is on hold, at least I until I can finish a customer's car paintjob by the end of this week. That means I'm gonna get paid! Bad news is I already spent that much money I made this month on the lude hahah!

    Now. Been thinking about this for a while. My stock carbs never ran right. One of my floats is leaking and I had it fixed with epoxy and who knows how long that would hold and it would suck if it starts leaking again while I'm in the middle of nowhere. And I can never tune them properly - it would never idle under 900rpm without stalling in D and idle is pretty rough in N and under 900rpm. Doesn't matter if the chokes are open or closed.

    So now decisions: rebuild stock twin Keihins and spending a fortune with rebuild kits, new floats etc (importing from teh USDM or JDM land since I can't find shit locally) and pray that the 27 year old carbs would last and run good for a while or spend a little bit more on bike carbs and pray that I can actually tune and make them work? I mean I can't even tune 2 carbs properly, let alone 4 of them? I have fairly basic experience with carbs just never dealt with anything performance related. Never rejetted a carb before so I'm not sure what I'm expecting from this.

    Fabrication wise, I can get the manifold made for cheap so thats not gonna be a problem.

    Hows the fuel economy with 4 bike carbs anyway? I'm shooting anywhere between 25-30mpg city driving. Not even sure if thats possible with the stock shitty tuned carbs hah!

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  23. #48
    LX User apache07x's Avatar
    Join Date
    Feb 2011
    Vehicle
    1987 Honda Accord, 1988 Honda Accord Hatch LXi, 2003 Pontiac Grand Prix
    Location
    Winter Haven, FL
    Posts
    401

    Re: My 86 Prelude Thread

    Quote Originally Posted by Hazwan View Post
    Project is on hold, at least I until I can finish a customer's car paintjob by the end of this week. That means I'm gonna get paid! Bad news is I already spent that much money I made this month on the lude hahah!

    Now. Been thinking about this for a while. My stock carbs never ran right. One of my floats is leaking and I had it fixed with epoxy and who knows how long that would hold and it would suck if it starts leaking again while I'm in the middle of nowhere. And I can never tune them properly - it would never idle under 900rpm without stalling in D and idle is pretty rough in N and under 900rpm. Doesn't matter if the chokes are open or closed.

    So now decisions: rebuild stock twin Keihins and spending a fortune with rebuild kits, new floats etc (importing from teh USDM or JDM land since I can't find shit locally) and pray that the 27 year old carbs would last and run good for a while or spend a little bit more on bike carbs and pray that I can actually tune and make them work? I mean I can't even tune 2 carbs properly, let alone 4 of them? I have fairly basic experience with carbs just never dealt with anything performance related. Never rejetted a carb before so I'm not sure what I'm expecting from this.

    Fabrication wise, I can get the manifold made for cheap so thats not gonna be a problem.

    Hows the fuel economy with 4 bike carbs anyway? I'm shooting anywhere between 25-30mpg city driving. Not even sure if thats possible with the stock shitty tuned carbs hah!
    Will an intake off of an Accord fit? If it's an A series and it will fit why not an Accord intake with a Weber on it? I get around 22 -23 in town with an auto sedan and 29 -30 on the highway. Probably get better with a lighter car especially if it's a 5 spd.

  24. #49
    LX User knifemind's Avatar
    Join Date
    Mar 2008
    Vehicle
    88 dx & 85 Lude
    Location
    Montana
    Posts
    132

    Re: My 86 Prelude Thread

    Quote Originally Posted by apache07x View Post
    Will an intake off of an Accord fit? If it's an A series and it will fit why not an Accord intake with a Weber on it? I get around 22 -23 in town with an auto sedan and 29 -30 on the highway. Probably get better with a lighter car especially if it's a 5 spd.
    He would have to swap an A20 head to use an A20 intake mani. Also, I don't believe a weber + filter would clear the hood. However since he states manifold can be made, maybe make a weber mani for the prelude head...it could be designed to sit low enough to clear I'm sure.

    Anyway, love the progress. Hope for more updates soon.

  25. #50

    2oodoor's Avatar
    Join Date
    Jun 2006
    Vehicle
    86 LX JDM B20A
    Location
    Georgia-lina
    Posts
    9,062

    Re: My 86 Prelude Thread

    I think I would stick with twin carbs, you can do some easy fabricating and use Delorto carbs, they make thes for air cooled vw that are super reasonable cost.
    The mc carbs would be fine but if you want the most mpg and power you'd need megajolt or some way to tune tbe advance.
    To use an a20 head and intake, hood clearance no doubt would be an issue but thats what hood scoops are for lol... i think. Those the dg style webers need a spacer to run great, nobody uses them here except A20A1 ( member) the floor of the manifold is just too close to get great atomization before hitting the runners.
    Last edited by 2oodoor; 10-08-2013 at 12:43 PM.

Similar Threads

  1. Piter's 1987 Prelude BA2 build thread
    By piter in forum Classic Preludes
    Replies: 17
    Last Post: 02-08-2012, 03:13 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink