Sorry if this has been asked but i can find what these are for. There are two clips on my bumper and I'm wondering what they are for, there are two of them.
Sorry if this has been asked but i can find what these are for. There are two clips on my bumper and I'm wondering what they are for, there are two of them.
Last edited by running strong; 09-16-2013 at 01:52 PM.
is there a way you can take a picture? not sure to what clips you are referring to
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
are they the threaded ones in the front? those are for the license plate on the front
Their threaded, but on the top of the bumper. I haveonly seen them on this one. They are threaded on the top of the front bumper, one has a cap on it with what looks like something broken on it. The other one has nothing but threads on it. I took a pic, but my phone will not let me upload it. I'll have to wait until I can get to a comp, tomorrow.
Sounds like it was added by a previous owner. Pics will help with ID.
Dr_Snooz
"I like to take hammers, and just break stuff, just break stuff." - Beavis
1989 Honda Accord LX-i Coupe, 240k miles, MT swap, rear disc swap
Shop manual downloads available here: CLICK TO VIEW
Do you mean on each end by the headlights? There are two plastic pieces that go under the headlights
They are kind of below the headlights more below the edge of the hood, not sure if we mean the same thing. Sorry it took so long but here are the pics.
The first one is a close up of the clip.
This one is the bumper showing both of them
This one is the cap, I took it off and put it on my hood for a better look.
What do you think they are?
Anything connected to them under the bumper. Do they look like the base for a deer horn/whistle or aftermarket headlight washer system.
1988 Honda Accord LSDX-I
Nothing that i can tell. I can't see anything, and i can't really get my hand up there though the opening. Nothing under the bumper, and nothing that i can tell under the car that goes there either.
Bookmarks