Like it says can I use an Lx-i valve cover on a carbed engine? I know it looks like it would fit and everything but the hose that hooks onto the valve cover is on the wrong side. I think it would work ok if i could extend the hose but how? has anyone else done this? thanks.
- Drive it like a Rental!
My 89 Ex-i on Car Domain
I'm pretty sure you can use it, if I recall someone mentioned it before.
H&R springs revalved Bilstein front struts, koni struts in the rear 195/55-15 Dunlop W-10's Dc Sports header custom cat-back with Dynomax super turbo w/3" Brembo slotted & dimpled rotor's EBC pads
Well, that's what I used to have, wrecked, 7/3/02.
Now I d
I thought i read it somewhere before too but that nubby thing on the top of the valve cover there is a little too far over for the hose from the air filter box to reach. Do I need it? if i do has anyone extended it? or am i stuck for now?
- Drive it like a Rental!
My 89 Ex-i on Car Domain
Yes it will fit... You won't have the studs for the brace that extends off the front of the air cleaner, so you can remove that when you put on the new valve cover.
holy shit jim... that is the sweetes paint job I have seen yet.
- llia
Just get a small valve cover breather filter and plug the hose on the air box side. That way you won't have to extend the hose.
- llia
Alright thats A20A1 I'll do that. Plug the air filter box and get a valve cover breather filter.
- Drive it like a Rental!
My 89 Ex-i on Car Domain
or you can get some hose from the autopart store and use that as a replacement hose.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
even with a longer tube, the angle that the tube would have bend would be so much that it will cause it to crimp.
- llia
man that accord in the pic is wrecked bad
MIKE
3geez member since October 4th 2001
yah man thats my old car at the junkyard. It got rear ended. The rest is all from people abusing it there.
- Drive it like a Rental!
My 89 Ex-i on Car Domain
Thanks mike, that the one I painted for bobafett. I used about 5 layers of paint and at least 5 layers of clear coat and a whole lot of anger words, cause their real hard to do and NOT mess up when it come's to removing the paint off the raised ribs and lettering.Originally posted by A20A1
Yes it will fit... You won't have the studs for the brace that extends off the front of the air cleaner, so you can remove that when you put on the new valve cover.
holy shit jim... that is the sweetes paint job I have seen yet.
H&R springs revalved Bilstein front struts, koni struts in the rear 195/55-15 Dunlop W-10's Dc Sports header custom cat-back with Dynomax super turbo w/3" Brembo slotted & dimpled rotor's EBC pads
Well, that's what I used to have, wrecked, 7/3/02.
Now I d
Posting Permissions
Reply With Quote
Bookmarks