im going to the junk yard today to remove a tailight. does anyone know what i should brign to remove it. rember im at a junkyard no electricy. so a heat gun is out of the qeustion.
im going to the junk yard today to remove a tailight. does anyone know what i should brign to remove it. rember im at a junkyard no electricy. so a heat gun is out of the qeustion.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
anyone
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
wrenches
Performance Modz: Short Ram Air Intake, Custom Exhaust w/o Cat & Resonator, Cherry Bomb Turbo Muffler, Accel Coil, Removed AC
Other Modz: Clear Blinkers, Purple Calipers, Accord Emblem On Dash, Winking Headlights
Bring your toolbox with you. You'll never know what you're gonna need.
"Please don't hesitate to use full throttle."
i thought it was glued in there
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
All right, here you go if it's no too late. You will need an 8mm deep socket and small (1/4") ratchet handle. That's pretty much it. On the junk car you can just pull the trunk liner because you won't be worried about breaking the clips. When you install the tailight on your car you will want to be more careful to remove the screws and clips so you can put the trunk liner back as it was.
I just did this on my car last weekend so it is fresh in my mind.
thanks dude im leaving right now. just in time. i owe ya one.
ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.
Putting the paint back on after
SOMEONE STOLE MY PAINT!!!!!
Posting Permissions
Reply With Quote
Bookmarks