i recently changed out both axles on my 89 accord with 2 remanufactured ones from autozone and the driver side is fine and dry but the passanger side wont stop leaking. i have changed the seal 3 times and on the 3rd try, i actually returned the axle and got another one that way i can try to narrow down the problem. i ordered a beck/arnley seal and installed them both. took for a quick test drive (praying that there wont be a leak) and as soon as i get back, theres the tranny fluid making its way down. i checked with a flashlight and i can totally see that the seal is all dry but right at the bottom of it, it is wet and leaking. i can also see that its coming from the inner hole of the seal and not the outer edge. i just don't know what to do. before i try and make my next move can someone please give me a suggestion on what i can do? i want to try one more time before having to go down to a shop. my next seal i get will be from Honda but i was reading something called "speedi sleeve"? does anyone know anything about this? i just wish i never gave up my original axles. i should've just had them repaired and reused them. this lesson is a tuff one to learn. the only reason i traded my originals in were because the cv joints were bad and it was easier just to trade mine in and pop in new ones. my axle never leaked at the seals until i installed the new one. thanks for reading
Bookmarks