Results 1 to 9 of 9

Thread: Prelude Master Cylinder on a 2gee?

  1. #1
    LX User 2geeSEi's Avatar
    Join Date
    Apr 2010
    Vehicle
    1985 Accord SEi
    Location
    Riverside, California, United States
    Posts
    280

    Prelude Master Cylinder on a 2gee?

    I was going to replace the master cylinder on my 2gee, and I noticed that the one for a 2gee Lude has a larger bore, but otherwise looks exactly the same. Has anyone tried to interchange these?



  2. #2
    SEi User obd0driver's Avatar
    Join Date
    Feb 2012
    Vehicle
    89/accord/lxi
    Location
    San Leandro, California, United States
    Posts
    1,029

    Re: Prelude Master Cylinder on a 2gee?

    OK so I just ran down this road. You can swap of to any Mc you would like you just need a spacer if the post the go's in the booster is longer then the stock one. Here's a couple of ideas that's you can try.

    Spacer set up. This would work with just about any oem Honda mc
    S2000 OEM Honda Clutch Master Cylinder & Spacer Combo (Used for Civic/Integra)

    Manuel brakes like I just did.
    Chase Bays Brake Booster Eliminator - Universal Chase Bays - ChaseBays.com

  3. #3
    LX User 2geeSEi's Avatar
    Join Date
    Apr 2010
    Vehicle
    1985 Accord SEi
    Location
    Riverside, California, United States
    Posts
    280

    Re: Prelude Master Cylinder on a 2gee?

    I'm not looking to get too crazy and spend a bunch of money on it. I am just looking to find out for sure whether it would be a direct bolt-on like it looks that it would. In the photos, the rod looks to be the same length.

  4. #4

    2ndGenGuy's Avatar
    Join Date
    Jan 2005
    Vehicle
    1981 Accord Hatchback, 1984 Accord Sedan
    Location
    Seattle, WA
    Posts
    9,697

    Re: Prelude Master Cylinder on a 2gee?

    Can you order it at NAPA or something and bring yours in to compare it? I don't think rod length will matter as long as it's not WAAAY longer, since you should have adjustment for that...

    You could even trace around the outside of it on some paper and take that to the auto parts store.

  5. #5
    SEi User obd0driver's Avatar
    Join Date
    Feb 2012
    Vehicle
    89/accord/lxi
    Location
    San Leandro, California, United States
    Posts
    1,029

    Re: Prelude Master Cylinder on a 2gee?

    Your gonna need a spacer. That's why I post those links you can get just a spacer. The rod length will be different (short). I spent 5 hour's at a parts shop mixing and matching boosters and Mc. Anything new the your's is different. The hard lines aren't gonna be in right spot so you have to bend them to fit or get new ones made. Also the first like isn't crazy it's a spacer and a Mc "plug and play" but I'm guessing you just shot it down without looking deeper Into it.
    Last edited by obd0driver; 04-11-2014 at 05:45 AM.

  6. #6
    SEi User obd0driver's Avatar
    Join Date
    Feb 2012
    Vehicle
    89/accord/lxi
    Location
    San Leandro, California, United States
    Posts
    1,029

    Re: Prelude Master Cylinder on a 2gee?

    Also look at the cost. There all about the same whether you go with the stock one for place it with a bigger one like the s2000

  7. #7
    LX User 2geeSEi's Avatar
    Join Date
    Apr 2010
    Vehicle
    1985 Accord SEi
    Location
    Riverside, California, United States
    Posts
    280

    Re: Prelude Master Cylinder on a 2gee?

    I just ended up getting the stock one. Like I said, I needed to replace mine and was wondering if it would fit. And Richard, it was not one from a newer car that I was looking at. It was from an 84 Prelude, and it looked like everything was identical, but none of the parts stores had either one in stock, so I couldn't compare. The car stops great with the Prelude rear disks. I was just thinking that I could have a cheap upgrade if they were interchangeable.

  8. #8
    SEi User obd0driver's Avatar
    Join Date
    Feb 2012
    Vehicle
    89/accord/lxi
    Location
    San Leandro, California, United States
    Posts
    1,029

    Re: Prelude Master Cylinder on a 2gee?

    Nice. So the lude one wouldn't have been a upgrade in you because their the same. The fluid reservoir is just bigger. You can put that on your now. If you wanted a better Mc you would have to go with something like I posted

  9. #9
    LX User 2geeSEi's Avatar
    Join Date
    Apr 2010
    Vehicle
    1985 Accord SEi
    Location
    Riverside, California, United States
    Posts
    280

    Re: Prelude Master Cylinder on a 2gee?

    The fluid reservoir is the same. The bore is bigger 7/8 vs. 13/16 for stock.

Similar Threads

  1. master cylinder
    By buttaz1 in forum Classic Honda Community Chat
    Replies: 4
    Last Post: 09-26-2006, 09:10 AM
  2. is this the master cylinder going or something else?
    By maka_RTH in forum 3geez Accords
    Replies: 17
    Last Post: 10-09-2004, 10:52 PM
  3. Master Cylinder going?
    By 88' Accord Ltd in forum 3geez Accords
    Replies: 4
    Last Post: 06-30-2003, 11:46 PM
  4. Need Master Cylinder
    By DBMaster in forum 3geez Accords
    Replies: 10
    Last Post: 11-04-2002, 03:03 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink