JDM Duckbill Replica's

[obd0driver]

OK guy's and gal's I've been working in this for a while now but I have a deal locked in to have my duckbill copied and reproduce for sale to the general public. TenbyTen is on board I have already taken them a wing to look at and use for the process they are now just waiting for my to give them my trunk and the cost of 5 units. They will cost $200 each and come in CF only.

Ten By Ten Custom Carbon Fiber

I would like to get a list going to see who would be willing to buy one if they are available. There are couple more step to take on my end to get them made. Manly I'll have to drop off my trunk to have the mold made and money. They have a minimum order of 5 but would like us to try for 10. As far as cost goes I worked a deal for $200 each(not including shipping) with a price drop if more than ten(15+) are ordered. If this sounds good to you guy's once I drop off my truck I'll post a paypal and will start there. Also be patient with this part of the process as this I the longest part of it and we have to get the first sold.

Payment can be made to my Paypal.
willing to take Payment with non refundable deposit of $75.

Here's my contact info:
Name: Richard T.
Email/Paypal:[email protected]
Cell: (510)512-4927

So post up name and I'll start a list and post when payment has be received

1.Tdurr (paid in full)
2. 88LXi68(paid in full)
3.Icfortner1989(paid in full)
4. 2oodoor(paid in full)
5. me(paid in full)
6. Ethan (paid in full)
7. Ethan (half down)
8.
9.
10.


Update!

[obd0driver]

Anybody else??? How bout input. I just trying to get a feel here to see if this is a good idea or not.

Sent from my SPH-L720 using Tapatalk

[FederalSecurity]

I'd be interested in a carbon fiber duckbill.

[obd0driver]

I'd be interested in a carbon fiber duckbill.

Nice I'll ad you or the list.

So at this point I think this is gonna end up not happening or the cost for each is going to be at least double. but will wait it out and see what happens.

Sent from my SPH-L720 using Tapatalk

[niles]

Do you think the duckbill will fit on a hatch? They have the rear wiper mounted back there...

[obd0driver]

Nope it would be too long. They will only fit the 4 door from my understanding

Sent from my SPH-L720 using Tapatalk

[niles]

Hatchies got the short-end of the design stick

[JohnBoy]

i'd do it for a cf one

[gp02a0083]

for hatches it would come up too short and the wiper post may require slight notching if anything, the duckbill was designed to fit on the trunk lid width, the hatch lift-gate is wider. I know because i started working on the molds so it will match the lift-gate and taper correctly.

[PolarWhite3G]

I'd like a fiberglass or keller one.

[pajamas95]

If you are going to be able to make it I would like a fiberglass one.

[obd0driver]

well someone beat me to it. I'm trying to get them made anyways. but if you go on the FB group page someone has them for sale.

Update:
Ten by ten custom carbon(local to me) is willing to do the CF one's for us.

We would need 5-7 up front buyer's
it would be 6-10 weeks before the first run would be ready.

So if you serious let me know guy's

[Matt's3rdGen]

I'm near Portland. How much for shipping?

[obd0driver]

I can put on the list but mine are not in production just yet. Waiting for them to give a time and day to drop it off. At that point I will then be able to give pricing.

[Tdurr]

how much would these run in cf?

[87roach]

Bump for this, this is a really cool offer.

I have no interest in this but I would be game for picking up a nice lip if one was ever made.

[obd0driver]

Im working out the finer details so ill get yoy a price soon. They will not quote me tell they see it in person

[obd0driver]

alright guys I found a vendor to make the wings for us. Here's the links to there site and fb page. the bad news is they will only offer CF wings. The cost is $200 each. The price will drop after the first bunch is sold out. I will be dropping off a trunk lid to them in the next week so they can start the process. so at this point its time to start collecting money so they can get a mold start. We need at least 5 for this to happen 10 would be better. I post updates ask the come. also there is a possibility that a whole trunk will be made as well.

Ten By Ten Custom Carbon Fiber

https://www.facebook.com/pages/Ten-B...66144240105777

[obd0driver]

Ok guy's I have dropped the part's off to tenbyten. so now who's ready to buy one. it will take a copy of weeks before the first one is done and the is after 5 have been bought. If I have pay paypal and I'm will to give you mine email and cell number. So who ready.

[obd0driver]

well I went to see the guys at Ten By Ten Custom Carbon Tenbyten Customcarbon today go over and talk about the plan/idea for my trunk and wing mold. I also put down $500 of my own money to get the ball rolling. So that two wings down three more to go. the first wing is about 6 to 8 weeks go and they will send me photos of the process.

[87roach]

Nice man!

Bump for this guys efforts.

[obd0driver]

Nice man!

Bump for this guys efforts.

This just the beginning. They are also interested in making many other parts. Armrest, head light buckets, eye lid ect. basically anything i can get to them

[obd0driver]

Wing number one go's to tdurr. Thanks for jumping on this group buy.

[SQ is the SQUAD]

id be intrested in a shorter wing for th coupe trunk.

[obd0driver]

It should fit both the coupe and sedan