Alright guys, im in the hardcore research portion of my project, here are my plans.
Individual Throttle Bodies: Honda CBR FI TB's, using their TPS sensors. I will use an a20 intake manifold, chop it up and use only the flange, straight runners and velocity stacks after the TBs. Heres my questions on this: Should i use the CBR Fuel rail with this? Will it fit? Do the CBR TPS Sensors match the same voltage as our TPS Sensors?
Semi-hardcore N/A Build
Headwork: similar to rjudgey's, larger valves, skimmed .5mm, mild cam, upgraded valve springs (researching that as well)
Bottom End: Skimmed 1mm, Diamond Racing custom pisons machined to work with B-series titanium rods. Comp ratio on this whole build is not to exceed 10.5:1.
Other than that, like i said im still doing heavy research, this is still at least a year away. As for management, OBD-1. Ill be using a 92-93 Accord Distributor, external coil. Ill have a bracket made for it to fit right. Here is the real question. I want to use Crome or Hondata s300 for tuning. I know almost no1 has run aftermarket tuning, mostly because i dont think there are any decent basemaps for us. Can anyone help me out, point me in the right direction?
Bookmarks