Page 1 of 7 12345 ... LastLast
Results 1 to 25 of 153

Thread: PROJECT: A20A to B18A Tranny Adapter Plate

  1. #1
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    PROJECT: A20A to B18A Tranny Adapter Plate

    i am bout to get cracking on making my adapter plate so that i cam mount my b18a cable tranny to my a20a motor. this is being inspired by jason budds turbo 9 sec a20a/b18a combo. we realy dont have to many details on how he did his, but we can work with the pictures ect. i am def going to need some help from the other members with stuff like CAD drawings. i was checking out www.emachineshop.com and was thinking that i could try to just them to get some parts made. i will def shop around on priceses first.

    i need some help on deciding what materials to use. at first i was palning on making it out is a steal plate. but then i seen the price of steal, the weight and thought how hard it would be to work with. so i think i am going to go with aluminum. do yall think aluminum is strong enough to hold? i was thanking of getting a 2.5x2.5 3/4" think sheet to start off with. ill get the exact measurement of the mating surhace to make use that not to small. but what do yall think on the thickness. is 3/4" to thick or to thin

    the first thing i am going to need help on is making the adapter that going to go inbetween the b series flywheel and the a series crank. seeing that i have both cranks and flywheels in my basement i can check to see how similar the bolt patterns are. if they are exactly the same then i would just need a CAD drawing of the bolt pattern that is the circular curcumfrance of the crank end, that is also 3/4" (or what ever we decide) thick. we also need to debate is this going to throw off balancing. i am going to take some flywheel bolts to a specialty bolt place to see if i can get time 3/4" longer to making up for the extra space of the crank spacer.
    here is a pic of jasons budds spacer. not sure if its actually fused onto the end of the crank


    if you have any important info/suggestions please peak up, and ill update them on this first page
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering



  2. #2
    3Geez Veteran smufguy's Avatar
    Join Date
    May 2002
    Vehicle
    10/Honda/Ridgeline
    Location
    NJ
    Posts
    7,202

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    6061 should be ample enough for that adapter plate

  3. #3
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    so yeaterday i pulled the tranny apart. it was pretty clean on the inside. none of the gears where striped or anything/ i pulled the whole gear assemplys out and washed the cases. once i look up what gears i want to use for my turbo setup ill start putting it back together. scraping up the money to grab a obx lsd ( we now know how to fix the known problems with these). since the tranny is apart it makes it a million times esier to mock up for the adapter plate. i am going to have my block and tranny powdercoated black, might even do the tranny case myself. i made the face of the b18 tranny out or cardboard and ill to the fave of the a20 block today and post pics later
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  4. #4
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by SQ is the SQUAD
    so yeaterday i pulled the tranny apart. it was pretty clean on the inside. none of the gears where striped or anything/ i pulled the whole gear assemplys out and washed the cases. once i look up what gears i want to use for my turbo setup ill start putting it back together. scraping up the money to grab a obx lsd ( we now know how to fix the known problems with these). since the tranny is apart it makes it a million times esier to mock up for the adapter plate. i am going to have my block and tranny powdercoated black, might even do the tranny case myself. i made the face of the b18 tranny out or cardboard and ill to the fave of the a20 block today and post pics later

    wow dude that is a hell of a project, I wouldn't even know where to start. As for the gearing, I would run the LS integra or b18a/b gears. They are the widest of all the b-series gearing and great for turbo applications.
    Complete repair manual <---- (click here)


  5. #5
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    yeah, well its a b18a tranny and all the gears look great. when i cleaned out the tranny case on the lil magnet on the bottom is had very few small shavings but no chunks or anything. and the gears look as if they where never grinded.
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  6. #6
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    This motor is going to be an anchor. The cast-iron block of the A20 coupled with the heavy transmission of the Bseries sounds pretty heavy to me. The A20 transmission is much smaller and I would think by doing the 1st gen Integra gear swap would yield just as good results with less amount of work.
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty

  7. #7
    Accord of the Year - 2007

    Legend_master's Avatar
    Join Date
    Oct 2004
    Vehicle
    1988 Honda Accord, CRV B20 swap.
    Posts
    5,037

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by 88LXi68
    This motor is going to be an anchor. The cast-iron block of the A20 coupled with the heavy transmission of the Bseries sounds pretty heavy to me. The A20 transmission is much smaller and I would think by doing the 1st gen Integra gear swap would yield just as good results with less amount of work.

    Do they make an LSD for the first gen teg internals?
    Complete repair manual <---- (click here)


  8. #8
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    well. i was reading the jason budd post where he was saying his a20 trannys where prob to blowing up. i dident want to deal with that. plus my stock tranny was auto, i am converting to 5spd. i already had a b18a tranny laying around, minds well put it to use. plus with the b series tranny i can use the obx lsd. and on top od that i can use the b series short shifters, shifter bearing, light weight flywheels and clutches. it does have alot od advantages. not to mention stage 3 axles
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  9. #9
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by Legend_master
    Do they make an LSD for the first gen teg internals?
    not usre, but i am sure they have on for the b18a cable tranny
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  10. #10

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by SQ is the SQUAD
    well. i was reading the jason budd post where he was saying his a20 trannys where prob to blowing up. i dident want to deal with that. plus my stock tranny was auto, i am converting to 5spd. i already had a b18a tranny laying around, minds well put it to use. plus with the b series tranny i can use the obx lsd. and on top od that i can use the b series short shifters, shifter bearing, light weight flywheels and clutches. it does have alot od advantages. not to mention stage 3 axles
    well, the only reason jason kept blowing A series trans was because he was pushing a lot of power. I believe he was close to 600 or over 600 hp easy.
    you are not going to push that much power. people on this board had their cars up to 30psi with stock tranny and it held up just fine. i think you are waisting your time and money. if i was you i would get carbed tranny since it has a little longer gear ratio.
    as far as short shifters, there are short shifters for our accords.
    i wouldn't use light weight flywheel. you don't want RPM drop too quickly when you shift. stock flywheel should be just fine.
    just build up the motor to handle some power and tune the shit out of it.
    as far as axels go, you can get them custom made.
    Alex.

  11. #11
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by shepherd79
    well, the only reason jason kept blowing A series trans was because he was pushing a lot of power. I believe he was close to 600 or over 600 hp easy.
    you are not going to push that much power. people on this board had their cars up to 30psi with stock tranny and it held up just fine. i think you are waisting your time and money. if i was you i would get carbed tranny since it has a little longer gear ratio.
    as far as short shifters, there are short shifters for our accords.
    i wouldn't use light weight flywheel. you don't want RPM drop too quickly when you shift. stock flywheel should be just fine.
    just build up the motor to handle some power and tune the shit out of it.
    as far as axels go, you can get them custom made.

    Agreed, just seems like a lot of work for nothing. You could turn around and sell that LS tranny for like $250 and put it towards something else.

    Rob is using an LSD from a B-series in his b20 trans, so I am sure something would fit in the A20 trans.
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty

  12. #12

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    with proper tunning stock engine can handle a lot more than 12 psi. Sean had GM ignition system and he was running close to 20 psi on stock bottom end.
    it is all about tunning.
    Alex.

  13. #13
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    well, i am still doing it anyways............................ just because i want to.
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  14. #14
    SEi User
    Join Date
    Jun 2005
    Vehicle
    1986 Honda Accord POS tranny
    Location
    Edmonton AB
    Posts
    1,608

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by shepherd79
    well, the only reason jason kept blowing A series trans was because he was pushing a lot of power. I believe he was close to 600 or over 600 hp easy.
    you are not going to push that much power. people on this board had their cars up to 30psi with stock tranny and it held up just fine. i think you are waisting your time and money. if i was you i would get carbed tranny since it has a little longer gear ratio.
    as far as short shifters, there are short shifters for our accords.
    i wouldn't use light weight flywheel. you don't want RPM drop too quickly when you shift. stock flywheel should be just fine.
    just build up the motor to handle some power and tune the shit out of it.
    as far as axels go, you can get them custom made.

    i dont think our trannys can withstand 600hp if we constantly bag on it, but even then, how many of us had that much power to play with from an A20?

    the stock tranny should be useable to a point where we shouldnt have to change it until we went for a track day.

    how much does a stock B series flywheel weigh? my guess is if its close to what ours weigh when its lightened, then it might be more worthwhile to use a B series flywheel instead with an adapter piece. the reason i say this is cause its alot easier to find a beefy clutch for a B series then it is an A series.


    how much, and where can i get custom axles made?

  15. #15
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    unless youre planning on running 10s the stock tranny should be strong enough, Jason budd and Johnny O had problems when they were running low 10s when they started going thru trannies.
    429whp 362wtq A20 TURBO. A20T>*

  16. #16
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    .
    429whp 362wtq A20 TURBO. A20T>*

  17. #17
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    maybe i plan on running low ten's : )
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  18. #18

    A20A1's Avatar
    Join Date
    Sep 2001
    Vehicle
    2006 Chevy Cobalt LS
    Location
    Kaneohe, Hawaii, United States
    Posts
    88,734

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    I thought you could get LSD with the B18? Isn't that what some of you guys wanted?
    - llia


  19. #19
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    just got a message back form jason bud, the plate is 1/2' aluminum and he getting me the info on where he got his crank space. the guy sold him a prototype is form quartersports
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  20. #20

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    good luck with a project i hope you get it done and have no problems running with it.
    Alex.

  21. #21
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by shepherd79
    good luck with a project i hope you get it done and have no problems running with it.
    thanks alex
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  22. #22
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by SQ is the SQUAD
    just got a message back form jason bud, the plate is 1/2' aluminum and he getting me the info on where he got his crank space. the guy sold him a prototype is form quartersports
    cant he send you more detailed pics and specs so its less hard on you?

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  23. #23
    2.0Si User SQ is the SQUAD's Avatar
    Join Date
    Jun 2001
    Vehicle
    1989 LXI Coupe Kswap, 1989 LXI Bswap
    Location
    Boston MA
    Posts
    2,860

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    i am slowly getting info directly from the source, just gotta wait it out a bit
    Style Quality Uniqueness And Design
    S.Q.U.A.D. Engineering
    www.squadengineering.com

    http://www.facebook.com/squadengineering

  24. #24
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    Quote Originally Posted by SQ is the SQUAD
    maybe i plan on running low ten's : )

    I hope you would raise that car up then...
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty

  25. #25
    Accord of the Year - 2008

    TWOLOUDNPROUD's Avatar
    Join Date
    May 2003
    Vehicle
    89 Accord No Motor and 88 Accord HB LX-i
    Posts
    3,350

    Re: PROJECT: A20A to B18A Tranny Adapter Plate

    the crank space you can get them off auto a20a3 i have like two of them laying some where i would half to look for them
    LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come

Similar Threads

  1. 9 second a20!! a to b series tranny adapter plate!!
    By adams86lxi in forum Restoration & Custom Fabrication
    Replies: 83
    Last Post: 12-19-2019, 07:19 PM
  2. B18A Intake Manifold on A20A
    By bboipinoy112 in forum Performance
    Replies: 68
    Last Post: 09-12-2012, 05:53 PM
  3. B20a G.Box - Adapter Plate project!! Input needed!!
    By Tomisimo in forum Restoration & Custom Fabrication
    Replies: 14
    Last Post: 02-06-2009, 01:06 PM
  4. adapter plate , tubo manifold
    By newaccorddriver in forum Forced Induction
    Replies: 4
    Last Post: 02-23-2006, 07:23 PM
  5. B18A manifold -----> A20A head
    By Sabz5150 in forum Performance
    Replies: 4
    Last Post: 09-24-2003, 06:21 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink