Ok, i want to get this project started as soon as possible. I have collected a lot of parts and im almost ready to start this damn thing. The motor is rebuilt and mainly stock with ARP head studs, ACL rod bearings, B18 intake manifold. I have a walbro 255lph fuel pump and DSM 450cc injectors for the fuel delivery. I have NGK 2 step colder plugs, MSD blaster 2 coil, and im going to get some new wires also (probably NGK) for the spark delivery. I have a manifold and downpipe made by justin, a T3/T4 turbo, 38mm wastegate, FMIC. I know i need a clutch and pressure plate, im going to get that last though. Im going to use a clutchnet kevlar soild hub disc(yellow performance rating) and a red or yellow pressure plate. I know i need a pyrometer to watch EGT's, a boost gauge, and probably a wideband A/F ratio gauge. My question is what else do I 'NEED' to be able to get this project working and running safely. I can always add things once i get it running and save up more money, i just want to get it running. Im only going to be running like 5-7psi until i get EVERYTHING i need to run it higher.
Bookmarks