Finally, a complete obd1 wiring solution for our accords! Thanks to the persistence of several of the members on here, some really neat stuff is becoming available. What better to top it off with?
All connections are crimped, soldered and sealed at the connector for ultimate reliability. New automotive wire is used in all runs, beautifully loomed and taped. Designed to be fully plug and play and easily removable.
You will also need a obd1 ECU, distributor and adaptor plate.
86-89 Accord obd0 - obd1 ECU jumper $100
Includes connector for extension harness. With vtec connector add $7.
ECU extension harness $70
Connects to ecu jumper to run extra wires to the engine bay. Includes vtec.
A20A3 obd1 add on engine harness $120
Plugs into ecu extension harness. Connects to additional sensors, obd0 distributor plug, and stock coil to allow you to run obd1. Includes ELD and mounting bracket. O2 front placement.
86-89 Accord obd0 - obd1 distributor wiring adaptor $65
Perfect for those inclined to run all the extra wiring themselves. Includes weatherproof crimps and wiring to the stock coil.
I will also entertain the idea of modifying your stock engine harness to your specs for obd1 and/or B series motors. ECU jumper and extension harness will remain the same as the A20 for these. PM me with details for a price.
This thread was started here and not in the for sale section to answer any questions and to allow for input. Actual transactions will be handled with private messages.
Bookmarks