Hey guys. Ive got a 1986 LXi and recently installed a b18 nonvtec ecu with a chip slot. I got it chipped with an HA motorsports chip, have a obd1 dizzy which points towards plug 1 when motor is TDC. Got my obd1 ecu jumper and dizzy wiring too and Im running a 1990 accord obd1 map sensor with the vacuum line, and did a vacuum delete along with the charcoal canister. Stock intake manifold all vacuum lines besides map sensor and dash pot.
IMPORTANT I had it idling before the vacuum delete, then did the delete and got the metal spaghetti out of there, now it will not run even though i plugged everything needed. Timing is correct, it cranks and backfires but wont start now. Anybody been here?
Bookmarks