Hey everybody, it stopped raining so I decided to go out and do a photo op.
![]()
Hey everybody, it stopped raining so I decided to go out and do a photo op.
![]()
Last edited by Legend_master; 02-27-2006 at 10:57 AM.
really nice pics bro, the car looks really different with the 88-89 front bumper
![]()
Originally Posted by Cheeseburger
thanks I am feeling the 88-89 bumper to, it just seems to flow with the car well.
The new pics does your new bumper a lot more justice. Looks tight!
I have a feeling that the pictures make those rims look more boring than in real life? They look flat in the pics, but I can see in one of the pictures that they're not a flat design.
nice car legend
Nice pics man. I'll be glad when summer gets here. Looks like you are having the same problem I had with my hatch, the condensation in the tails. Usually does that after you wash it.
simple...just how i like it
Originally Posted by thegreatdane
I never really noticed that untill now, they do look a bit flat. The pictures just don't do the wheels justice. The car look 110% better then it did without them.
so hows she riding. how did the final strut/combo work out. any new news on the axles?
looking good
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
that looks really good! i love the way the wheels look on there and the front bumper! keep up the good work
yea this dfw raining stuff has sure sucked but at least this week itll b nice. we'll have to meet up some time at like the empty six flags mall...lol
Be nice to your Honda. If you or anyone you know harms or hurts a honda dial 1-800-hondabuse.
Originally Posted by acco-R-d
We are trying to work that out right now, but we can't find enough people in one area. https://www.3geez.com/forum/showthread.php?t=49633
It rides pretty nice, but I get a horrible vibration from 2k-4k form the axle problem. I definitely need t find a shorter axle for the pass side. As for the driver I actually split at the join and think it has to do with the axle being to short. I am still working on it and I will post up when I figure out the perfect combo. The front suspension works great, very stiff, very smooth and no bouncing. As for the back I will just say it gets the job done, but I would like something better.Originally Posted by SQ is the SQUAD
clean, some 88-89 corners would make it look even better![]()
Originally Posted by Busted_Blue
I have been looking into that, but I was not sure if they just bolt right in or not. I will go with the entire front facia of the 88-89 grill, corner lights, and pop-up covers.
Originally Posted by Legend_master
it does indeed bolt right up![]()
So the heavens brought forth the 88-89 font end and 3geez were reborn, sorry got out of control thereOriginally Posted by Busted_Blue
.
If you're going to change corners. Go all out and get the JDM corners, then get an 88-89 Grille/eyelids so it all matches.
The patterns on the 86-87 grille/eyelids/corners is different then the pattern on the 88-89 grille/eyelids/corners
I think the change would look really nice on your car, very clean. And its different seein the b series in there :P
Oh man... those rims.. they just... WORK.
I love it!
B18 AND it looks kick ass...
makes me miss my hatchy a bit...
03 Nissan Maxima 6spd 3.5L -- Daily Driver
96 Civic Ex-T 210whp/183wtq @ 9.5 psi tuned on Hondata s300 -- Now at 12psi, unknown power
04 CBR600RR - Sold, and now wrecked. RIP
man im loving your hatch, it looks good and it sure ass hell should perform good..... have you been nominated for AOM yet???
Damnit. I need to put some money into my engine. Grr... My car has looks but not performance.. Yours has both.
Looks good... I think you should leave the rims as they are and drop the car an inch or two.
Alas, no more 3gee. She was a wonderful car and will be missed..
No more 92 hatch either! I go through cars too much.
90 CRX
Thanks guys it took alot of work to get this car to the point it is at. I think SQ is the SQUAD tried to nominate me once, but something went wrong with it. I have got along way to go, before this car will even be close to done.
dont worry it will all bolt up, the fenders are the same, and so is everything else for that matter with the grill and light covers. it would look sweet with some JDM corners on that color
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
Car looks really good man, I love the ls mesh's theyre nice wheels.
And about the axle stuff, i've been really sick and shit lately, and now i'm back at work, once I get a second and find a stupid tape measure I'll get the dimensions for you
My Project thread https://www.3geez.com/forum/project-c...dan-build.html
My Flickr: http://www.flickr.com/photos/jdmca5/
Originally Posted by Hash_man_Se_i
thanks man, no rush just let me know.
i did try but the link to the rules for the nom was broken and i guess i dident do it right, so insted of the asshole helping me he just deleted me post, when i clarely said the link wasent working for some odd reason
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
Bookmarks