what is it?
Corner signal led socket, it replaces the stock bulbs.HAHAHHAAHHAHAHAHHAHA....more to come...
These will go in my orange part of the corner signals. Still contemplating how i'm going to make it stay in place. Basically i will mount it where i want and then pull the wires through the white socket and cut them where i need them.
weeeeeeeeeeeee, I wish I had money to pay you for LEDs :cry:
- The Rockcord (AKA CJ)
84 Light blue LX sedan 265000
88 Accord LXi Sedan w/ A18 swap to EFI 288xxx
BT mafia All the way
(or Prelude power)
Dang that looks good. You are good with that shite
Steven
ohhhhh ok cool!
How would you fit that through such a small hole?Originally Posted by BITESIZE
These will go in my orange part of the corner signals. Still contemplating how i'm going to make it stay in place. Basically i will mount it where i want and then pull the wires through the white socket and cut them where i need them.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
i was thinking the same thing
damn those circular ones look tight.. i bet that helps with the problem of light distribution. sweeeeet
It fits barely, I've already tried it.
i thought you would have taken off the lense and put it in lol
I have the wires long....slide the circuit board in.....pull the wires.....it's flush....then i put the white part on and cut the wires how ever long i need them. Does that make sense?
ooo i get it now
So you slide the circuit board into the light, and the wires between the socket(white) and the circuit board are long enough so that when you twist the original socket into place there is enough wiring to twist a little bit? If so, i under stand. Sounds very cool.
Sam
1989 Accord LX: Sold with 208k-now somewhere around 230k with new owner
Current:
2014 Elantra Sport 6MT
2000 Montero Sport 4x4 (beater, trail rig)
it would be cool to have a squra circuit board that fit in th whole lin so the whole marker lights up in leds :}
1988 Honda Accord LX-i Coupe 123k miles.
That's how my tail lights will be, except with bright clear red led's and orange led's for the turnsignals.
top pic looks like a gun...lol
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
cool i knew u were smartIt fits barely, I've already tried it.
Nice Job!
I may try this myself in a couple. I'm not too bad with a soldering Iron.
I may even make a flasher circuit using a 555 timer.
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
you car is going to be so lit up with leds that you will be sending signals to aliens!!!LOL
http://www.myspace.com/reanimator420
originally posted by ACCORDEPICENTER
it should be there tuesday... So take your keyboard and wrap it around your neck and hang yourself with the cord.
hey you should make them knight rider lights lol
ok so bitesize had inspired me to do some thing i been thinking of. well all the brand new cars well some of them are now updating there lights to led and i see brand new cars at my job every day and i see some leds and i had been ispired by that and BITESIZE hey bitesize do u think that u could make me led interor light on cieling and a licence plate lights led i would do it but i dont know the first thing in doing that get back to me on this
rhd restoration 2nd gen prelude
stop tinkering around and get my tail lights done already
LOL, nice work man, I am starting to fall in love with your craftsmanship
^^^SH!!!! Don't tell anyone but tail lights are being prototyped as we speak..... WA WA WA! Same design basically except with huge circuit boards.
Posting Permissions
Reply With Quote
Bookmarks