Page 1 of 2 12 LastLast
Results 1 to 25 of 37

Thread: anyone interested in buying a GREDDY GRACER LIP for 88-89 accord

  1. #1
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469

    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord

    a friend and i will be finally getting a cast mold of a greddy gracer lip done for the 88-89 accord models. it will not fit 86-87 due to the difference in bumper designs. 86-87 accord owners can try it on.. but i cannot gaurantee it to fit right. and if it fits right.. ill be greatful.

    so wat i need to know is,.. how many of u will be interested. when the lip is done.. it'll cost 200 dollars shipped. it'll be made out of fiberglass. ive had the lip on my car before.. taken it off due to it being broken all the time.. and i was the first to ever do that lip on an 89accord. for pics.. please click on the link below. thanks to mike at www.89accord.com for hosting the pic. for additional pics.. email me and ill send u a different pic.

    http://89accord.com/jons3rdgen.htm

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com



  2. #2
    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord
    86AccordLxi's Avatar
    Join Date
    Oct 2000
    Vehicle
    1989 240sx FB,
    Location
    Salem, OR
    Posts
    3,058
    You have that stock 94 Accord lip on now, don't you. How does that fit? And how hard would it be to fit that lip to the 86-87 style bumpers?

    Alex

  3. #3
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    not very hard.. a heat gun is needed though and two ppl is required...
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  4. #4
    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord
    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557
    why not just put an 88-89 bumper on an 86-87? Thats a hella nice lip....wish i had 200 for it. That seems kinda steep for just a lip......or am i just a tight wad?
    Nothin' 2 Old Racing

  5. #5
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    actually.. if u were to buy an original greddy peice.. it's 200 bucks without shipping.. and when u recieve it. it's a bitch to put on. that's y no one else has done it.... except ofcourse for one other 89 accord i jus happen to saw an i was like.... WTF! but oh well. plus it's custom.. and shipped!
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  6. #6
    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord
    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557
    i can get it through my wholesaler for 150 my price........
    Nothin' 2 Old Racing

  7. #7
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    that's a great deal.. now ur only set back is..... good luck trying to put it on
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  8. #8
    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord
    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557
    how hard can it be? whats the reason it wont fit? Is it contoured too much?
    Nothin' 2 Old Racing

  9. #9
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    the original greddy gracer lip for a 94-97 accord is polyurethane.. but it's a different kind. forgot wat it's called.. but it's not ur flexible urethane that u see from wings west. this is thick.. and it's not very easy to flex. not only that, it's longer.

    if u dont believe me.. try it. if u screw it up.. ur shit out of 150 dollars. which couldve been spent elsewhere. y do u think no one has it on their car??

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  10. #10
    2.0Si User ^ () ^'s Avatar
    Join Date
    May 2002
    Vehicle
    1988 / Honda / Accord / LX-R
    Location
    nYc
    Posts
    3,475
    Originally posted by wickedaccord
    the original greddy gracer lip for a 94-97 accord is polyurethane.. but it's a different kind. forgot wat it's called.. but it's not ur flexible urethane that u see from wings west. this is thick.. and it's not very easy to flex. not only that, it's longer.

    if u dont believe me.. try it. if u screw it up.. ur shit out of 150 dollars. which couldve been spent elsewhere. y do u think no one has it on their car??

    jon
    Hey jon.. check ur pm !thanks
    -=PROJECT-=-

    NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.

    B-Series Wants You

  11. #11
    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord
    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557
    i was just wondering why it was hard to put it on.

    Is it because the 5g bumper is rounded and the 3g is curved?
    Nothin' 2 Old Racing

  12. #12
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    dont get me wrong.. im tryin to be like pissy an shit. it's jus.. i'd rather help ya out than trying something like this that i know can screw up ur pocket book.

    anyhow.. the lip is longer and more rounded, that is the hardest part when trying to bend something that doesnt want to bend. and when heat treading.. it melts away instead of bending
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  13. #13
    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord
    89cordlx's Avatar
    Join Date
    Apr 2002
    Vehicle
    Black 1989 LX-I Coupe and 2000 EX V6 coupe
    Location
    Westerville, Ohio
    Posts
    930
    whats this thing look like? hehe
    Check my cardomain for sale items! Cardomain

  14. #14
    DX User
    Join Date
    Jun 2003
    Vehicle
    89 LX 5 Speed Sedan
    Location
    Beaverton, OR
    Posts
    77
    man i want one, too bad there's no way in hell i'd have the money
    "Welcome to Shady Acres, where our motto is, Watch you freakin back!"

  15. #15
    anyone interested in buying a GREDDY GRACER LIP for 88-89 accord
    A20A1's Avatar
    Join Date
    Sep 2001
    Vehicle
    2006 Chevy Cobalt LS
    Location
    Kaneohe, Hawaii, United States
    Posts
    88,734
    I know a 3g with that lip... he's had it for a few years now.
    - llia


  16. #16
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    there's a link i had up at the top.. click it. ive had that lip back in 97.. then the first to ever see it was MIKE at 89accord.com since then ive had a hundred emails about it but no one wants to do it cuz it's hard... and expensive. but now is a good opportunity for this. an like i said.. the only other car ive seen with it was that white one with 97 prelude headlights. im sure he's one of the guys who emailed me for details.

    right now im jus wondering if there r ppl that will be interested. if not, im not even going to bother making a mass production of it. ill jus make a dozen that's it. one for myself.. and the other 11 for those that i know will really want it.

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  17. #17
    LXi User
    Join Date
    Dec 2002
    Vehicle
    '88 Accord Lx-i
    Location
    Tigard, OR
    Posts
    963
    I'm interested, but how does it attach to the bumper??? Does it bolt or screw on, or does it hook up to the area under the bumper???
    - 01 Ford Ranger 4x4
    Flip down LCD screen and DVD player, 8000k HID's, Westin light bar w/ PIAA 520's, Custom Flowmaster cat-back.

  18. #18
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    it bolts up underneath the bumper. all u have to do is bolt it up. simple as that... gee so far not a lot is very interested??....

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  19. #19
    LX User
    Join Date
    Apr 2002
    Posts
    421
    i am interested however i am on classes now and will not be back for another month, i will let you know tho. thanks
    Aka mugenaccord from the ole ole ole board
    Pheonix Red CA6 -- Sold
    Grey ED6 -- current project

  20. #20
    LX User Vega88lxi's Avatar
    Join Date
    Apr 2002
    Vehicle
    1989 SE-I
    Location
    CT
    Posts
    475
    I might be Interested if this is still going on.
    3geez member since October 2000
    Jealousonesenvy2@yahoo.com

    1991 Accord Wagon 5spd - JDM Ste-lo

  21. #21
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    well seems like not a lot is very interested so i may not even make a production of it. not only that, not a lot want to spend 250 shipped
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

  22. #22
    3Geez Veteran dXsquared's Avatar
    Join Date
    May 2002
    Vehicle
    1987 Hatchback phreak project
    Location
    NORTH BAY ONTARIO
    Posts
    5,598
    IMO its too round for the car's lines...

    Travis
    www.cardomain.com/id/dxhatchback

  23. #23
    2.0Si User buzzbomber88lx's Avatar
    Join Date
    Dec 2002
    Vehicle
    1985 Toyota Celica GT, 86 accord lx-i, 89 supra turbo
    Location
    Kansas
    Posts
    2,100
    that lip looks tight! that had to be pretty hard to mold because of the boxy(no offense) style compared to the newer accord's more round style.
    1985 toyota celica 3sgte project
    1989 toyota supra turbo
    1986 honda accord 4dr lx-i

  24. #24
    2.0Si User ^ () ^'s Avatar
    Join Date
    May 2002
    Vehicle
    1988 / Honda / Accord / LX-R
    Location
    nYc
    Posts
    3,475
    These Lips are made for 88-89 Accords, unlike the one Wicked Has that was custom fiited to the car.. So the lips will line up!
    -=PROJECT-=-

    NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.

    B-Series Wants You

  25. #25
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    Originally posted by DXHATCHBACK
    IMO its too round for the car's lines...

    Travis
    dude, if u think it's too rounded.. have u seen wat some of the guys has done with 4th gen kits?? u tell me the difference there...

    no offense to the guys with kits... heh heh. props for even tryin though

    Jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com

Similar Threads

  1. any interested in buying this??
    By ShyBoyCA6 in forum For Sale
    Replies: 2
    Last Post: 02-04-2010, 06:09 PM
  2. Replies: 12
    Last Post: 08-06-2008, 07:45 AM
  3. Replies: 13
    Last Post: 03-10-2004, 12:47 PM
  4. Buying An Accord
    By MilTownSHO in forum Newbie Introductions
    Replies: 6
    Last Post: 10-21-2003, 12:17 AM
  5. Anyone interested in buying stuff from SPI Tuning (formerly Redshift)
    By YK86 in forum Classic Honda Community Chat
    Replies: 18
    Last Post: 09-13-2002, 08:56 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
VigLink badge